✨ ELECTROLUX DRYER WON’T SPIN - BELT REPLACEMENT ✨
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- ✨ ELECTROLUX DRYER WON’T SPIN - BELT REPLACEMENT ✨
Easy way to replace the belt on your Electrolux dryer.
Click here to order your new Electrolux dryer belt: amzn.to/3i70FSo
✨ If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Click Here to Donate with Venmo:
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-TH-cam Channel: / scottthefixitguychannel
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Good Multi-Bit Driver Tools: amzn.to/3tC5FA4
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/s...
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊
PLEASE HELP TO KEEP THIS SERVICE GOING - THANKS SO MUCH😀
www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X
Please CLICK Here To SUBSCRIBE: / @scottthefixitguychannel
Join Our Channel To Get Access To Perks:😊
/ @scottthefixitguychannel
Check Out Scott’s over 600 Appliance Repair Videos At Our 2nd CHANNEL:
/ @quickandeasy5minuteap...
CHECK OUT OUR NEWEST APPLIANCE REPAIR CHANNEL BY CLICKING HERE: / @fastfreefixes
CLICK HERE TO SEE OUR NEW TESLA 🚘⚡️ CHANNEL:
/ @teslamodel3newowners
NEED MORE EXPERT HELP WITH YOUR REPAIR? CLICK HERE TO SCHEDULE A 30 MINUTE MEETING WITH ME USING FaceTime📲 OR Phone Call☎️ OR Zoom💻 Meeting: calendly.com/s... .
.
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X .
.
DISCLAIMER: This video or description may contain Amazon affiliate links, which means that if you click on one of the product links and buy the product, I’ll receive a small commission. Thank you for supporting this channel.
Scott The Fix-It Guy *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.
Thanks!
Your video was very helpful and gave me the conviction to fix it myself. Thanks!
Thanks so much 😊🎉👍
Thank you for making this video! You helped me replace my less than 2 year old Electrolux broken dryer belt. Your You are awesome!
Awesome job Matthew 😊
Thanks just had to replace it again!! lol! Your video helped me twice because I have a short memory!! My wife put rugs in the dryer and some how it got caught between the drum and the panel and burned the belt up. Smh I’m beginning to dislike Electrolux. Thanks again Scott!
Thank you as well for this video our belt broke and that drum was making the worst noise but w/your video 2hrs and a $16 belt from Amazon, DONE AND DONE!!!!!
Thanks Betty😊
This video saved me a bunch of time and mistakes with lots of screws left over. Thanks Scott!
Thank you Scott, just used your video today to replace the belt on my Electrolux dryer (model efme617siw0).
Glad it helped😊😊😊
I have to thank you. This video helped me fix the problem with minimal cost and aggravation. It took me a couple hours, and the repair guy is booked out three weeks (yikes). Attaching that idler spring was a challenge. The connector on the electronic panel is very light duty and I feared I broke it working the front face off. I came off with a jerk, snapping the connector apart. Luckily, no damage other than a misaligned pin or two. I wasn't sure which way the belt goes, but mine ended up with the ribs out. Thanks again.
Nice job, thank you for posting👍
Yes that idler spring was the worst
@@bettygregoire4651 It seem that this particular model has a "feature" that heavy things like sweat shirts, carpets, etc get caught between the drum vane and front of the machine, stopping the drum and consequently making the motor melt and break the belt. I've replaced mine 6 times in the past couple years and we've never had a problem with the previous dryers like this. I still reference your video but have it pretty much memorized. Thanks again for the nice video.
Thank you man! This and your other videos have already saved me hundreds!
That’s what I love to hear👍😊
Excellent video. I followed it end to end and actually had fun with the repair. Hundreds of $$$$$ saved!
Awesome,
I’m so glad it worked 😊
I change the belt today. But it won't spin anti-clockwise anymore (ỉt does before the belt broke). Do you have any ideas what wrong with my dryer?
Great Question👍 Click Here to Join Our Channel and I’ll Set Up Live Help with You to Get this Fixed: th-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
Great video. You walked me right through my belt change! 👍🏼
Awesome,
Thank you
Loved your video! Think it will help me immensely, but being a female if I can fix this dryer without taking it off my washer as it's a full sized stackable, I'll be extremely happy and grateful as Electrolux has totally not responded to my requests to fix what I feel is a very dangerous dryer they designed. My Electrolux dryer was pricey so i'm upset that the one fin (I call it that) for flipping clothes is a very poor design as it is right up against the drum walls so any clothes that have resistance such as a rubbery substance will get stuck in the narrow space which is no more than 1/4" of space between fin and wall locking up the drum and burning the belts off. In less than 2 yrs the belt has had to be replaced 3 times from the same thing occurring with that wide fin which needs corrected from what I'm experiencing. I'm wondering if all the fins could be the same length and if I could replace the long one to be as the other two eliminating the problem as Electrolux will not respond to me about any of this that i call a dangerous situation for a fire to start when the drum locks up and the smell of burning rubber occurs. Any help or knowledge would be appreciated. I won't pay these exorbitant costs. So far one appliance repair is $375 for repair and a fee to look at it. That's not happening and never dreamed an Electrolux product I'd ever find made like this set!! No more of any of their products or Samsungs since they are the same company now. I'm rambling bc I'm upset over a product I expected to be the creme of la creme not a piece of, you can figure out what I think.
Thank you sir! Was very pleasantly surprised to come across this video. Helped me fix my dryer!
🤜✋
That is Awesome 😊😊😊
Thank You , I appreciate this video. You help me fix my dryer .
You are so welcome😊👍
This was very helpful , replaced my belt then it snapped again , any thoughts on next steps?
I’m sorry to hear that.
I wonder if the belt was too small?
@@ScottTheFixItGuyChannel it was the correct belt , i took it apart again and found a semi melted plastic wheelish laying in the bottom.. but not the spring wheel or any other wheel that should be in there .. i dont know what it is or where it came from .. i do know the spring arm wheel is loose on its shaft it can slide like a 1/2 inch left to right .. not sure if that should be happening ..
@@sg60545 did you ever figure out the melted plastic wheel? I found one too, and wondering what it could be.
@@gtlogic6023 I did not .. still a great mystery .. I looked at the schematics too and don’t even see a similar part .. but all is working great now .. ended up changing the spring arm too ..
This is crazy! I found the exact same off white melted plastic wheel! I can’t find anything on where it came from. I thought maybe it was a spacer for the guide wheel. One thing I don’t like is how close the spring is to the belt.
Excellent Video. 👍Liked clear,concise instructions & video. I’m on my 3rd Belt replacement for this Electrolux Turd 💩. It’s the worst Lemon worst Engineered Appliance I’ve ever owned or fixed more than twice. Video is clear,concise,& I can count on 2+ hours of cussing the Electrolux design each time. Never got easier,only got MoreMad.
Next time,I may drag it down the dirt road & back over it before dumping the Electrolux in ScrapMetal yard!
You Speak The Truth 😂😊👍
Thanks, used this video to take my same model apart. Found grandma's cat socks. 😂 my daughter turned them into mittens. Anyways. Thanks for the quick save.
Nice job Eric😊😊😊
Super simple. Thanks for the save
You’re very welcome 😊👍
My Electrolux dryer did the samething yesterday same identical dryer we have only had it for two years seems to me the belts should last longer than that but thanks for the video
Yes, this worked great! Thank you very much. Perfect!
Excellent,
Thanks so much Ethan😊👍
Got it done. Thanks. Great video.
Thanks so much Tim😊👍
Having an issue where when I try to remove the bulkhead, the entire drum is coming with it. Any suggestions on what I missed?
Great Question, can you contact me at: scottthefixitguy@yahoo.com With the Model Number and the problem?
Thank you for the explanation and details. Great video
Glad it was helpful!😊
@ScottTheFixItGuyChannel I am trying to find the replacement belt for mine. Where did you get yours?
Does Back of Electrolux Clothes Dryer come off easier? Seems like the front was most complex way to service a belt?
It can only be done from the front😞
Great 'How too' but man, what did you do to your finger? It looks like you gashed it pretty good.
I think I cut it on the repair right before I filmed that one🙀
Assuming you can get a new belt at any hardware store?
Can you send that same question to my email? At: scottthefixitguy@yahoo.com
I have one of these and laundry keeps getting stuck in between the lint trap and body. I've gone through 2 belts in only 14 months. Wish I never bought this. Had my whirlpool 18 years and never had a belt snap. Guess I will get really good at taking this apart.
You shouldn’t have to, but with this dryer I would put the smaller items in a knit bag with a zipper so they don’t get pulled in👍
Thank you for the video, so helpful.
You’re most welcome👍
Thank you for your video.
You are welcome😊
I'm replacing the belt on my dryer for the 3rd time. Ugh. Any thoughts on my it keeps breaking?
Thanks Billy,
Does the drum spin pretty easily by hand?
Me too. This video is as clear & concise as possible. But I’d have to say this model Electrolux,on my 3rd belt is a Lemon Mis-Engineered Electrolux Turd 💩!
What size belt did you buy? They no longer carry it on the link provided.
Thank you so much
You’re very welcome 👍
Thanks!
Thanks so much Edwardo😊
Mom of 2 here…I took my dryer apart and replaced the belt by myself. I was very proud, UNTIL I went to hit the start button and the dryer just beeped at me. Any suggestions?
Thanks Erin, can you double check that the belt didn’t come off of the idler pulley that keeps the belt tension. If the belt gets loose it won’t start. You can check to make sure the door is fully closed.
I'm having the same problem with my dryer.... I replaced the belt and I get power but just beeps three times when I press start. I've checked the Thermal fuse and door switch seems to have continuity. Someone mentioned it could be the belt switch which I can't seem to find. Any suggestions what it could be would be appreciated or if the belt switch is a possibility?
My Electrolux dryer has two wheels on the pulley and not one… any idea how to put the belt on with two wheels??
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: th-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
We’ll Get It Fixed 👍
I think this is the same dryer as mine. Good video. A little shaky but i understand. No i just gotta find a new F!@#$% belt! Drum spins too easy so i think my belt snapped. New dryer too. Had it for a month. Didnt have to pay for the upgrade from the old washer and dryer because i rent. Landlord paid for that which is nice. Old washer and dryer were falling apart.
Try using the model number to help you find a belt👍
What size belt is it ? I bought one that was 88 and it won’t fit
Can you send that same question to my email at: scottthefixitguy@yahoo.com
Thank you
You’re welcome😊
Where does the spring go back too
Which spring do you mean?
Hi this was very good and easy to follow but after replacing everything and putting back together it still wont rotate.
Any suggestions?
Thanks Carlos ,
How does it feel when you reach in and turn the drum by hand?
I tried but the door of my Whirlpool duet washer don’t open
Thanks Lydia,
Do you think there might still be some water left in the tub?
The door locks won’t open if there’s still a lot of water left inside the tub.
what size belt did you use?
Mine is tough to turn and is making a clunky noise.
Sounds like a support wheel is broken.
Okay thank you.
This was super useful. Thanks very much.
You are most welcome.
🙌
Thank you😊
Remember to always unplug the damn thing! I cannot express in words the danger of an electric shock!
You speak the truth👍
Thanks!
You’re very welcome👍
Thanks!
Thank you!
I know for a fact I would have been charged several hundred dollars for this simple job. Done in under an hour.
That’s what I love to hear 😊😊😊