Boss GT-1 Signal Chain and Order of Effects Blocks
ฝัง
- เผยแพร่เมื่อ 24 เม.ย. 2021
- Boss GT-1 Signal Chain and Order of Effects Blocks.
In this video about the Boss GT-1 Multi Effects Processor from @BOSSinfoglobal, I'll explain and show the signal chain and the order of the Boss GT-1's effects.
Knowing your way through the signal chain, and the order of the different effects, will help you obtain greater tones and patches.
I'll also show you a few tips and tricks, for example, how to move effects and easily select different types of effects.
If you haven't already, make sure to check out my tutorial on placement of the FX1 and FX2:
• Boss GT-1 Tutorial | F...
Also, how to switch between effects in FX1 and FX2:
• Boss GT-1 Tutorial | S...
Further information can be found in the Owner's Manual and Parameter Guide, on @BOSSinfoglobal webpage.
Make sure to 👍 SUBSCRIBE 👍 to my Channel, and hit the 🔔 bell 🔔, to keep up to date with my newest uploads.
Requests on specific Boss GT-1, and Boss GT-100, tutorials are very welcome - just leave a comment down below.
DON'T MISS THESE other Boss GT-1 videos:
Boss GT-1 Write Menu Details and Explanation Tutorial + Patch Display Trick.
1️⃣ • Boss GT-1 Write Menu D...
Menu Tutorial - Output, Display, USB, Pedal Calibration and MORE
2️⃣ - • Boss GT-1 Menu Tutoria...
How To Go From Clean To Distortion.
2️⃣ - • Boss GT-1 - How To Go ...
Creating A Patch From Scratch.
3️⃣ - • Boss GT-1 Tutorial - C...
Tone Studio Tutorial.
4️⃣ - • Boss GT-1 Tone Studio ...
DON'T MISS OUT on these Guitar Repair and Tech videos:
Crimson Guitars Luthier Tools Unboxing.
1️⃣ - • Crimson Guitars Luthie...
Guitar Pedalboard Build & Setup.
2️⃣ - • Guitar Pedalboard Setu...
Sterling by Music Man│S.U.B. Series Ray4 Bass Setup│Part 1 - Truss Rod Adjustment.
3️⃣ - • Sterling by Music Man│...
DON'T MISS OUT on these playlists:
Boss GT-1 Tutorials.
1️⃣ - • Boss GT-1 Tutorial Videos
Boss GT-100 Tutorials.
2️⃣ - • Boss GT-100 Tutorial V...
🎸 1974 Greco Les Paul Custom EG-480 | Made in Japan | Refret | Part 1️⃣ 🎸
3️⃣ - • 1974 Greco Les Paul Cu...
🎸 1970s Greco Les Paul Professional PE-520 / PE-600 Restoration 🎸
4️⃣ - • 1970s Greco Les Paul P...
🔨 Guitar Fret Work 🔨
5️⃣ - • Guitar Fret Work
🔧 Epiphone SG G-400 Guitar Setup 🔧
6️⃣ - • Epiphone SG G-400 Guit...
Thanks for watching and for the great support, it's truly valuable to me!
Comments/questions are very welcome, so make sure to leave one in the section below.
See you in the next one 📹📸
🎼 Music 🎼
Success Story by Mixaund | mixaund.bandcamp.com
Music promoted by www.free-stock-music.com
#BossGT1 #BossGT1Tutorial #GuitarNTabs - เพลง
Good video! GT-1 is an excellent option.
Thank you, Antonio! I really appreciate your comment and time for watching.
Indeed it is, there are so much to uncover!
Let me know if you need anything.
Cheers.
awesome! please make more in-depth videos for this processor.
Hi there, Rex.
Thanks for your comment and suggestion, I really appreciate it.
Anything in particular you're looking for, and would like me to do?
Let me know, I'd be happy to.
All the best.
Cheers.
Buyed 5 days ago.. Was waiting for this. 😉 Thanks
Hello Dave,
Thanks for watching and for leaving a comment!
Nice choice, you'll love it!
Please let me know if you need anything or run into issues.
More tutorials to come, so consider subscribing, and keep up to date.
All the best.
@@GuitarNTabs Just subscribed ☺️.
Thanks for your kindness.
Thanks to your tutorial, and having red all the manuals, it's all quite Cristal clear, and I'm pretty happy.
I use it through Boss Katana 50 mk 1,no effects loop, straight in front, with no amp simulations, basically just a pedalboard.
The only thing I can't get is : can I assign one specific overdrive to ctl 1 or is it just a generic OD solos?
I mean, not engaging the OD from the chain, but use 2 overdrive like 2 tube screamer, one in the chain and one when engaging CTL 1.
@@davepilgrim5798 - Hi again, Dave.
Thank you, I greatly appreciate that - it helps the channel growing!
No problem, I'm always happy to assist.
Fantastic, that's really great to hear!
Superb, you have got the setup dialed in correctly - I'm glad to hear that.
You can assign any of the OD/DS effects from the selection, but you can only use 1 at a time, so no OD/DS stacking...
There isn't a SUB OD/DS category, like on the GT-100, GT-10, etc.
However, you can set up an Assign, to switch from one OD/DS type to another, if that's any help?
I hope this helps.
Let me know.
All the best.
@@GuitarNTabs thanks a lot. I'll tell you 👍
Hello, thank you for the wonderful videos. My question is about the violin settings. I will put the amplifier first. The noise isolation has been done, dilay and reverb
Hi,
I'm not sure I fully understand your question...
Can you explain this a bit further?
Thanks.
maybe one you can help with? I want to use my amps tone and distortion.
I kind of want my patch to have the CTL button as a solo button and then have the wah
BUT the issue im having is when ever i turn on my amps distortion the delay becomes VERY harsh. so its subtle when my amp is on clean but very very boosted when i distort my amp
Great video thanks. Just wondering is it possible to fully move the individual effects around within the chain. Random experimentation sakes.
Hi there,
Thanks for your comment and question, as well as your kind words, I greatly appreciate it.
The effect blocks are moveable, yes. Once you place the cursor on them, you should see an option called "Move", and that will allow you to change the effects around. That's a great feature, especially for experimentation.
I hope this helps.
All the best.
@@GuitarNTabs Shucks sorry missed your reply somehow. Thanks!
So when you change around the signal chain, the order of the physical buttons below will not be the same as the order of the effects on the lcd screen right.
@@accentontheoff - The physical effect-buttons will stay the same, but the signal chain within the GT-1 will be changed, if you moved any of the effect blocks around.
I hope this makes sense.
Merry Christmas.
@@GuitarNTabs Yep got it, that sounds good. Thanks and compliments of the season to you too!
Great video! I have one question though, you said delay and reverb are always last, does that mean that they can't be moved? Would it be possible to place a distortion after the reverb?
Hi Johannes.
Happy New Year.
Thank you for your comment and question, I greatly appreciate it.
All effect blocks can be moved within the Signal Chain, so if you want a distortion after the Reverb, then you can do so.
Talking about pedal/effect placement, it's also a good idea to have time-based effects, such as Delay and Reverb, placed as the last pedals in the chain, so you have delay and then the Reverb.
I hope this helps.
Let me know if you need anything else.
Cheers
@@GuitarNTabs thank you for the reply, that's exactly the information I needed, gonna get one now. Considering fx order, i know that delay and reverb traditionally should be placed last in the chain. However, i want to use it for shoegaze, a genre where distortion often comes after reverb. Happy new year to you too, liked and subscribed l!
Nicely explained! Just a question tho. How many effects can we use at once in the signal chain?
Thank you, I appreciate it!
You can have the 6 FX blocks on at once, then you can use the GT-1's assigns to change the parameter, switch between effects, etc.
Very versatile.
I hope this helps.
Cheers.
Good video. Can you have 2 delays in the chain to play Hank Marvin style for example?
Thanks for your comment and kind words!
Sure, two delays can be done, you can use the dedicated DELAY-block, then the SUB DELAY in FX1/FX2. In theory there's also a delay "hidden" in the REVERB-block. So if you wanted, you could have up to 4 delays!
I hope this helps.
Let me know if you need anything else.
Best regards.
@@GuitarNTabs thank you so much for replying, that's a great help!
@@AmbroseB1900 - You're very welcome!
Enjoy and have a great day!
Cheers.
This processor has drum rhythm beat Or not?
Hi there, Nishan.
It does not have a drum rhythm beat, no.
In my opinion, I've never really needed it, so no problem.
I hope this helps.
@@GuitarNTabs thnk you. If I have any prblm in gt1 may I ask you?
Sure, no problem at all.
Yes, if you have issues or need anything, just let me know.
Have a great day.
@@GuitarNTabs thank you
No problem.
Have a nice day.