Encasing An Entire Can Of Pringles In Clear Epoxy Resin
ฝัง
- เผยแพร่เมื่อ 11 ก.พ. 2022
- We tried encasing an entire can of Pringles in clear epoxy resin. It took some learnding but we figured it out. The results weren't half bad actually.
🔪🔪 waterjetknives.com 🗡️🗡️
Are you or anyone you know going through a divorce? If so, i'm sorry to hear about it, but we'd love to help divide the assets.
Music: David Cutter Music - www.davidcuttermusic.com
Don’t steal our videos, if you’d like to use our video for something please contact us via email. - บันเทิง
![ชวนน้องลงทุ่ง - เงาะน้อยเพชรบ้านแพง X น้องมายด์ [ Music Video ] Official Saman Music](http://i.ytimg.com/vi/Bq7Hw9culjE/mqdefault.jpg)
Honestly, I didn't know that Dan and Mitchell even had normal jobs at the shop. I thought all they did was make circles on water jet.
Literally my exact thought. Dan and Mitchell do actual work?!
Yeah they make knife blanks, even better than circles
Lmaooo that made me laugh probably more than it should have.
I love how of all channels it’s Waterjet Channel that’s creating groundbreaking techniques for resin projects 😂
Keep it up guys!
I’m just as shocked as you are
@@WaterjetChannel were the other guys go ?
I think you should use a pressure pot. I think that would be a good idea.
Good thinking
I'm really surprised no one has mentioned this before.
"Why's it so milky, what'd you do to it?" Dan is 100% going to do something to you.
Screw resin, this channel is called the water jet channel. That's what was great about this
It's really staring to feel like dan and Mitchell are becoming secondary charecters
I was glad to see some Dan this time
im fine with this being the resin channel now, as long as its a bunch of relatable dudes who makes scuffed projects
Hey guys! I used to work in the hotel and food industry when we had to create displays with food we would paint the food in aspic gel which would essentially preserve the food and make it really shiny. You could try using that prior to dropping in resin.
Thanks! Love the channel!
Your growth in resin knowledge is pretty impressive. The speed you have gained ability usually takes so many projects but your mix of expert advice and brute force until it works is great.
It's resin.. there is a wealth of knowledge out there so it'll be easy to learn fast.
Glad to see Dan make it in a video, though ‘Niel has been doing a great job with these videos lately
Now we know where Dan has been all these weeks - bullfighting in his figure-hugging little ginger toreador jacket!!!
Toreador march is a great song especially on a music disk;)
Good to see you again Dan
They're the resin channel now. I'd like to see some raisins in resin.
Probably should have just used Original Pringles. The acid in the vinegar might have had a reaction with the resin causing the cloudiness.
Mold release spray would be your guys' best investment for resin projects like this
In another episode of "the resin's channel". Does the resin taste like pringles?
Poor Null I feel like he is the guinea pig for anything that is going to be painful or tedious in that shop.
Wait. Were they *actually* doing work? I didn't know they actually worked there
Glad to see Dan is finally out of rehab (again.) ;)
Now we can finally see whats actually going on inside those cans
This channel has become - that derp encasing greasy stuff in resin, plus some water jetting at the end. I’m not complaining though.
Resin actually burns better than I thought it would 😆😆
Immediately I am reminded of how cursed the simplified pringles mascot is
Can we start cutting things in half again? A hydraulic spool maybe - one of those complicated hydraulic computers that controls things like excavators.
I honestly thought the bowl of noodles you guys slipped in there was some horrific maggoty mess lol
i think this is the first time in the history of the channel where we actually saw the guys do actual real life work
That one felt smooth. Keep this format!
Welcome to the resin channel
@Waterjet Channel _Come on 1 Million Subscribers! It won't be long now! My 2 sons and dad (myself) love your channel!_ *Thanks* 👍
Welcome back Dan! Love the crop top!
1:38 That's the new variation on 4chan /mlp cumjar project. Pringles can. And it solidified. Everyday we stray futher from de wae.
How much work did you get done that day you painted all of the Pringles individually with resin?That Sir is dedication!
Thanks for making a great video!
Glad to see some Dan this video
I like that I have the same welding helmet like the one seen in the video!
Helllllllll yeah! Neature walk reference at 2:35
Welcome to the resin channel! Where we spend most of the time creating resin casts and a few seconds of waterjet cutting.
Not that I'm complaining, just saying
Im missing you throw stuff up the wall
The years I have been watching your videos and I have always wanted to know what you do there. What do you really cut and make there? What happens way in the back that we can't see? What are your jobs? Who else works there and what do they do? Who is Creg (the boss, the owner)? Basically the in and outs of the workshop.
ART!!!
Waterjet Channel - Top effort for the weirdest shit.
like how you guys made an end table out of the pizza, i think it would have been cool to make a lamp out of the pringles to sit on the pizza table, great video nonetheless
Mitchell goes full Rambo mod !
I think this is now the resin casting channel.
You guys can try stacked lay's chips if you decide to try it again, I believe there is less grease in them than there is in Pringles.
4:13 big Lumpy Space Princess vibes.
You should actually create a candle with Pringles
hoooly shit i wasn't anticipating seeing a Neature Walk reference in the funny plastic chips video
Seal your mold and turn it upside down if it’s floating, basically sinks to the bottom visually
1960's: I think we will have flying cars in 2022
2022:
😂 these guys crack me up
The dirt on his forehead is delightful
Fuckin LOVE this channel haha never clicked so fast, also glad theres more NUL in the videos.
Might have got the Pringles right the first go if they weren't salt and vinegar. The vinegar might have been the problem not the salt....
you guys need to give up your epoxy resin privileges
Do a "sleeve" of golf balls, and tennis balls.
Have you tried using some clear coat spray to prevent the Pringles from getting like that?
This is so weird...I am literally eating Pringles when I got the notification for this video lol
This might sound crazy but hear me out. I think you should use a pressure pot.
Nyuntl really good on channel
crying here... seeing pringles getting destroyed like this..RIP
5:24
I am more amused that my comment was one of the ones chosen for the video than anything else
0:04
Macho man Randy Savage would have been pleased.
It hurts my soul to see those pringles encased in their epoxy tomb
nice
You should cut the clear one into a hexagon shape around the chips
Strevor is really coming into his own making these ridiculous resin project videos lol
The resin chanel jajajaja
Was Dan doing real work? I’m confused.
I don't know why you didn't like the first one, I always have a tube of pringles with milk for breakfast, it's delicious
Can you show us all the things that you've put in resin of cut in half?
finally, a reason to buy salt and vinegar
0:56 he’s lost weight eh? Looking good Mitchell
Long shot but during the first 30 seconds I see that knife poster. Where can I get one of those?
I ate a chicken fried steak, mashed potatoes, gravy, and green beans in the amount of time this took.
Glad they didn't cut the good one
4:13 What he did was probably using the vinegar and salt chips. Vinegar has acetic acid and the sodium chloride along with whatever oils from cooking the chips are probably clouding the resin. Skip the flavored stuff and eliminate potential interferences. Fun videos as always 👍
Yes, use those salt & oil free chips.
Is that a set of them amazing RAYCON ear buds at 4:09 I hear they have the superior sound quality of top name brands but at a more affordable price.
So is Nyül the dedicated resin guy?
I have always subbed to this channel foe the two guys. They are so funny to see joke around and the water jet stuff was pretty cool. Not really a fan of this new person who has been doing more and more just him and resin
Some how I can smell the Pringles
i miss dan
Are we going to talk about the hair at 6:35?
Don't they have polishing belts for the belt sander?
Thank u
My guess is that it was the starch from the potatoes that leached out and made it milky looking.
Polish resin with a torch, it's so much quicker
I wanna see y’all turn that on the lathe
Haven't bought Pringles since they changed their icon
Water jet vs hydrophobic object when
When are you going to replace the water jet lines with resin and try to cut things totally destroying your crazy expensive machine?
top ten times science went too far
Epoxy resin channel.
I did buttered popped corn in resin. It didn't work out.
Try using candlewax instead of resin to make a real pringles candle!
4:14 bruh
Did they got smaller ???
Do you want some Pwingys, for the room?
Can I ask what happened to WestShop?
rip environment