Sup Gunny I've been looking forward to this series on the candy over flakes, I saw the teaser you put up a while back and it looks really nice when it's done so was looking forward the full series and yeah please upload more to your RAW channel as I will watch anything you put up Gunny🙏👍 Just want to say that it amazes me how you get the panels so flat as it's something I struggle with plus when I lay my WoW primer down I can sometimes see the outline of my repairs🤔🙈😂John UK.
I don't work in the car repair trade. I work in an office but love your videos. Where does a panel beater stop and you begin? Does the painter always block and fill the small dents and make sure all panels are flat?
Just out of curiosity was this a "RETAIL" job at a full charge rate? If that was the case how much did the shop charge the owner? I love watching your videos being a retired auto body and reconditioning guy of almost 50 years experience however you along with other video makers always fail to mention $$$$$ ! I was never fortunate to have a mixing rack station as you do so I had to purchase pre mixed paints from the local distributor! The last job I did we as similar to this in your video! My shop supplies were probably $1500 US by the time I was said and done! I was working on a much larger vehicle than you were! So that's why I'm curious! Thanks Bob!
Thanks for posting the vid 👍. I got a set of Pinky’s delivered last week and the 3M cubitron is an excellent abrasive,cuts and last a long time . Gunny I’m after a base/clear gun to working from home . I’m getting a Chicago Hush 150 , have you tried the Walcom combat light gun , looks to have low air consumption or just go with the Devilbiss ProLiTE with TE10 & T110 air cap .👍
Were you able to keep the flake out of the jams when they hung the doors , I know them flakes probably got everywhere haha??? Kinda like how sealer creeps up sometimes behind your tape or did you use transition tape ???
Wow ! I hope your boss appreciated your know how and that he pays you accordingly with what you deserve ! A.I. the robot won't even be up to your capacity !
I'm not on Telegram, don't fall for the scam comments.
Gotcha, I knew it was Bot/scam
Craziness! The owner picked the right man for this job, that's for damn sure!
You sure have gone all out on this spray job Gunny. Great video Gunny your work is fantastic mate
Badass work man
I've had good luck with Mirka velcro 6"
Beautiful job Gunny.
Yey yey yey, gunny vid 👍 got me coffee👍got me morning smoke👍, living the dream.
Gud vid
Realy nice Job Gunny 👍👌🏻
The owner better be happy otherwise him and I will become best friends.
Awesome effort Gunnie 👌
😂😂👊
Sup Gunny I've been looking forward to this series on the candy over flakes, I saw the teaser you put up a while back and it looks really nice when it's done so was looking forward the full series and yeah please upload more to your RAW channel as I will watch anything you put up Gunny🙏👍
Just want to say that it amazes me how you get the panels so flat as it's something I struggle with plus when I lay my WoW primer down I can sometimes see the outline of my repairs🤔🙈😂John UK.
Worth watching Sylvester's Customs on TH-cam for bodywork tips too.
Ok thanks for that I'll give them a look👍
@@JohnWD40TC02 th-cam.com/video/9hae5WXNGjc/w-d-xo.html
I don't work in the car repair trade. I work in an office but love your videos. Where does a panel beater stop and you begin? Does the painter always block and fill the small dents and make sure all panels are flat?
Just out of curiosity was this a "RETAIL" job at a full charge rate? If that was the case how much did the shop charge the owner? I love watching your videos being a retired auto body and reconditioning guy of almost 50 years experience however you along with other video makers always fail to mention $$$$$ ! I was never fortunate to have a mixing rack station as you do so I had to purchase pre mixed paints from the local distributor! The last job I did we as similar to this in your video! My shop supplies were probably $1500 US by the time I was said and done! I was working on a much larger vehicle than you were! So that's why I'm curious! Thanks Bob!
Thanks for posting the vid 👍. I got a set of Pinky’s delivered last week and the 3M cubitron is an excellent abrasive,cuts and last a long time . Gunny I’m after a base/clear gun to working from home . I’m getting a Chicago Hush 150 , have you tried the Walcom combat light gun , looks to have low air consumption or just go with the Devilbiss ProLiTE with TE10 & T110 air cap .👍
I'd recommend the trusty old Pro Lite. I don't rate Walcom. I love the Pinky's Blox 👌 good compressor too mate
@@TheGunmanChannel Thanks for the quick reply 👍. Spray guns direct have the prolite at a good price .
Were you able to keep the flake out of the jams when they hung the doors , I know them flakes probably got everywhere haha??? Kinda like how sealer creeps up sometimes behind your tape or did you use transition tape ???
I was ok with the flakes, but I did get a bit of clear in there. With the 100 coats 😂
@@TheGunmanChannel I'm glad it worked out gunny
Love n you’re Chanel mate 👍
Hey mate we just seen your comment and checked your channel out its awesome ill watch your videos 👍👌
Thanks mate, I'm going to dig into your channel too
@@TheGunmanChannel okay cheers man
Wow ! I hope your boss appreciated your know how and that he pays you accordingly with what you deserve ! A.I. the robot won't even be up to your capacity !
Hey , love all your vids, what type of price for a job this big
Any chance of a shop tour gunny
Coming next week
@@TheGunmanChannel top man 👍
Interesting information all taken on board , fantastic job much love from 🇬🇧
what liquid did you use to do a panel check?? 9:52
Prepsol/Wax and grease remover
Nice💯🔥💪🏾👌🏾
What about epoxy primer gunny..😉
👍 👌 🙋
👍😎👍😎👍😎👍😎👍😎👍
I just got that telegram message.Thought it was genuine.
Nothing can be worse than Mirka sand paper, that stuff is awful.
😂😂 agreed