Awesome cut, Brent. Viewers who don't cut may not recognize just how hard that was. I was riveted to the video as you brought that one "home". Thanks much!
Hi john, and thanks .Yes this was difficult just for the size aspect of it. I spent about a month off and on working on it. After i finished and looked it over i would have been better off i think to have cut it in a portuguese cut.
As Usual🙏Ur R Indeed A Master Craftsman in Faceting👌❤️I could Hardly Believe My Eyes to C the Magnificent Transformation Of A Round Crystal like Ball Transform intoA JUICIEST JUICY GEMSTONE QUALITY CRYSTAL! Almost looked like A Priceless Cut Fancy EMRALD! BRAVO! ❤
A k9 crystal cost only 15$ already cutted into huge gem, make it truly priceless and mesmerising. The finished product look like huge emerald with utmost higher percentages of clarity. Good job sir!😎
Omg this is so beautiful ,looks so rick ,the colour has come out beautifully ,very clever ,I did not realise you could cut something as big as a small crystal ball ..Beautiful 😀
Tanks very much, just about anything can be cut and polished , the size is the liming factor and this one is close to the max. The softer materials are the harder ones to polish.
Never imagined that an ordinary glass could shine like a real emerald! Outstanding work! I feel decades of experience in every your movement! I have one maybe dumb question, have you ever tried to use sealing wax instead of epoxy glue? It departs a lot easier, and you can use it multiple times unlike an epoxy glue.
Thanks very much, i use faceting wax almost everytime but this big gem , i wanted no chance of failure so i used the glue. I do agree the wax is much easier to remove .
@@tennpikr74 You've made a quite right decision, epoxy didn't fail you and you've made a beautiful gem! My 11 y.o. daughter literally falled in love with it!
I'm a new subscriber but I have been watching your videos. Everything I have seen has been absolutely beautiful. You are most talented and a joy to watch. TH-cam is very therapeutic. Thank you for the contribution of your skill and talent.
Hi. I understand that is not a correct question from American culture point of view but if you forgive I will dare to ask you how much will this piece of art cost now?
just a quick tip for dop transferring: when remobing the first dop on such a large specimen you can simply take it to the saw and cut off the top of the dome where the dop is epoxied. Then just heat up the removed head without worrying about heat transfer to the other dop. Probably save 15 minutes.
Right , I actually did that on the the large portuguese cut I did last year . on this one it didn't seem too much excess material to bother with, plus you have to be careful not to scratch the pav. or polished girdle when you take it to the saw. I just did another large Portuguese quartz but this time I did a better preforming job so the crown end wasn't as big. thanks for commenting.
@@tennpikr74 A while after I posted that I had a sudden concern about cross contamination from the saw blade/water. I suppose you'd have to be extra careful about cleaning the specimen before grinding. Lovely work, by the way. You, and other youtubers like yourself, have inspired me to design a cut of my own. and I can visualize the finished form already. I'll begin researching how to make that table of angles and depths.
@@garrettragsdale4826 hello, i do clean the stone somewhat after sawing but im not extra careful since when i start the grinding im always using a very coarse disc so i never have had contamination on those discs that i know of. congrats on designing your own gem cut. one of these days i may try also. thanks for your comments. do you use any computer programs for designs?
After you get the facets cut to the 600 grit stage you must prepolish at 3000 or 8000 grit. You can buy precharged laps here: www.shop.lightninglap.com or you can buy copper or zinc laps that you apply diamond paste to. Once you have prepolished the stone i use a lightning lap cerium oxide lap to final polish. The zinc and copper laps can be purchased here: www.gearloose.com. happy cutting.
Man I am in such awe of your skill and I only ask this out of curiosity, but what were those little seemingly subsurface scratches on the bottom of the gem when it's rotating on the rotating presentation platform at the end? 23:16 it's pretty apparent, but I'm sure you know what I'm talking about. What is that? Imperfection in the glass?
Thank you. There are imperfections that seemed to be invisible early on then appear as i cut further. They look like hair like inclusions. I did have lots of scratching issues with the cutting and polishing , you might be seeing tiny scratches also.
@@tennpikr74 Super interesting stuff, sir. Thank you for taking the time to teach me! So I keep thinking as I watch these videos: If one of you guys were to produce and then market a tiny little treasure chest filled with relatively cheap but pretty gem stones, I'd pay quite a lot of money for it. Maybe different sizes, different qualities up to very expensive versions with better gems and maybe tiny little gold coins or something lol. There are quite a few of us IT nerds with expendable income who would absolutely love the idea of owning our own little actual treasure chest with actual treasures. You could market it to gamers and collectors. Sorry if it's a dumb idea lol! And thanks again, sir!
Wow. Very nice. Thanks for the close video and clear steps you took. I was thinking it would make a pretty cool shiftier knob. Love the color. Lets hope green lantern doesn't see this. Lol
is it just me or in the segment where you are showing the gem off outdoors you can see some marks on the table that indicate you had contamination in your final polish compound of a much coarser grit?
That is what glass will look like when the sunlight hits it just right. Those marks are invisible everywhere else but direct sunlight. If i had polished further with 100 k or 200k diamond those might not be visible.in the sunlight . Thats my take on it anyway.
Your lap must be a newer one . My 260 is well worn but still works ok for this material. Once a lap has worn down it will start leaving a smoother finish.
I kinda thoght you were gonna take us to a rock pile you had of shiney gems, kinda like well that was fun here tresure pile :P looks great thogh that bubble thogh>.
this might be a stupid thing to ask but im designing a watch for my brand and I was wondering if their was a way to to tunnel in a 4mm by 12 gold word inside something like moissanite aha :P
Wow that's a whooper! Polishing must have been tedious. I'm wonder where you got your splash guard 3D print? I'm tried of bulldog clipping my splash guard for girdle cuts and I'm ready to chop it up.
Hello, yes polishing and cutting the table was a real bear, it took around 4 to 4.5 hours total. I thought i would never finish the polishing. the splash guard gate is from a faceter named terry gump, here is his email: tfg.lapidary@gmail.com. Thanks for watching.
Great Job ....... I appreciate your hard work and passion but after all this is a piece of glass, not a gem ! Am a wrong ? It looks soooooo beautiful !
Yes , not a true gemstone. it is virtually worthless. I did this purely for the challenge of cutting a very large piece. Im just used to calling them all gemstones. I had to choose the glass as anything natural or a precious material would be unobtainable in this size or astronomical in price. I guess i might have been able to find a piece of cz but then it would have cost at least $100 . This piece only cost about $8.00.
Watched this video about 3 times now for reference and it's been a huge help! 2 questions: Did you use a jig to set your dop stick and let the glue harden? Also what kind of dop stick are you using? Thanks in advance!
hello, i did use the jig while the glue was setting up, i used a cone dop as the sphere is round and it would work the best. After i slid the moving part of the jig together to touch the sphere , i have to keep moving the whole thing and turning it so that the glue wont run off or to one side until it set s up, usually about 2 min. or less and it stops flowing. after that i mixed up more glue and built it up around the dop. i didnt want to take any chances for it coming loose.
@@tennpikr74 Okay that makes sense. I have been using my lathe to keep it turning for me, but it's a rather large machine so I would like to find a more practical way of setting the dop stick. Any links to a recommended jig that I could buy? Thanks for the reply!
@@calebanderson3951 I recommend the jig made by poly metric , zane the owner can set it up to work with ultra tec or facetron dops as well as any 1/4 in. dop. I made a video recently comparing a couple jigs . www.polymetricinc.com
You say that you ran into several problems with this "gem" because it was a 5.5 on the Mose scale. Is that because the "gem" is to soft or to hard? I know the Mose scale goes from 1-10, with diamond being 10 and ruby/sapphire being 9, and most steels bring in the 5-6 range.
That is amazing I love to cut lab made obsidian that is a so good 😊 to see someone else cutting the same style of mineral the saying more to life than a diamond you have prove this that is a ripper well done.
Gems by mbk just good to see some else working this style of mineral at the moment cutting a piece of orange 🍊 lab grown obsidian love my greens and oranges and your self.
@@danielvecchi9939 Thanks, daniel, some say the glass stones can be dangerous to cut with the lead or boron additives . They can make some pretty gems.
Gems by mbk l love faceting have you ever tried to polish on a vinyl lap and if not what are yours reasons for this just would love to know. What is best minerals you can easily polish than other minerals.
@@danielvecchi9939 No, i have not tried a vinyl lap, actually i have not seen any available. That would be a lap to be used for soft gems which i have not cut many. Im getting good results with the laps i use now. The easiest i have polished would be sunstone feldspar, topaz, zircon, garnet. the harder ones are peridot, cubic zirconia, sapphire, quartz.
My wife knows I'm focused when the facetting porn music is in the background. I've learned a lot watching you work. The stones you cut are always glitter bombs.
..ini sama ama batu saya cuma kecil kalau dilihat biru kehijauan sinar pantulannya hijau ....kalau memang bener bener batu dites huruf kalau ditempelkan hurufnya membesar......itu asli permata
Berikut adalah beberapa di Amerika Serikat, tapi saya pikir Anda dapat menemukan beberapa di India atau Cina. Bwww.rockpeddler.com/product-category/faceting-machines/www.johnsonbrotherslapidary.com/Faceting.htmlwww.ebay.com/itm/FACETING-MACHINE-ULTRA-TEC-V2-GEMSTONE-GEM-LAPIDARY/303154925335?hash=item4695710f17:g:GkwAAOSwhoZc21vy
Awesome cut, Brent. Viewers who don't cut may not recognize just how hard that was. I was riveted to the video as you brought that one "home". Thanks much!
Hi john, and thanks .Yes this was difficult just for the size aspect of it. I spent about a month off and on working on it. After i finished and looked it over i would have been better off i think to have cut it in a portuguese cut.
As Usual🙏Ur R Indeed A Master Craftsman in Faceting👌❤️I could Hardly Believe My Eyes to C the Magnificent Transformation Of A Round Crystal like Ball Transform intoA JUICIEST JUICY GEMSTONE QUALITY CRYSTAL! Almost looked like A Priceless Cut Fancy EMRALD! BRAVO! ❤
A bit more complex than a basic princess cut, love it
A k9 crystal cost only 15$ already cutted into huge gem, make it truly priceless and mesmerising. The finished product look like huge emerald with utmost higher percentages of clarity. Good job sir!😎
Thanks very much.
Obama Voice: "You mean...the Chaos Emeralds?"
Your jazz music playing and watching you grind the stone is so relaxing. Love it 👍
thanks very much, ive had some complaints about it on other videos.
Hello sir
Beautiful piece and original stone as very beautiful work
thank you for your teaching. I love
Thanks very much.
Omg this is so beautiful ,looks so rick ,the colour has come out beautifully ,very clever ,I did not realise you could cut something as big as a small crystal ball ..Beautiful 😀
Tanks very much, just about anything can be cut and polished , the size is the liming factor and this one is close to the max. The softer materials are the harder ones to polish.
Never imagined that an ordinary glass could shine like a real emerald! Outstanding work! I feel decades of experience in every your movement!
I have one maybe dumb question, have you ever tried to use sealing wax instead of epoxy glue? It departs a lot easier, and you can use it multiple times unlike an epoxy glue.
Thanks very much, i use faceting wax almost everytime but this big gem , i wanted no chance of failure so i used the glue. I do agree the wax is much easier to remove .
@@tennpikr74 You've made a quite right decision, epoxy didn't fail you and you've made a beautiful gem! My 11 y.o. daughter literally falled in love with it!
I'm a new subscriber but I have been watching your videos. Everything I have seen has been absolutely beautiful. You are most talented and a joy to watch. TH-cam is very therapeutic. Thank you for the contribution of your skill and talent.
Hi larry and thanks for subscribing and watching.
> I sell my gems in my etsy store
Oops, there is page not found, could you update the link of the store? I'd like to buy such huge gems.
Wow. It is another beautiful piece of art that has been created by you. Excellent job. Congratulations, it could you lots of time and effort.
Thank you very much.
Hi. I understand that is not a correct question from American culture point of view but if you forgive I will dare to ask you how much will this piece of art cost now?
@@vectorv750 It is unknown what it could be worth now.
Hello, what do you use for polishing?
Thanks you
just a quick tip for dop transferring: when remobing the first dop on such a large specimen you can simply take it to the saw and cut off the top of the dome where the dop is epoxied. Then just heat up the removed head without worrying about heat transfer to the other dop. Probably save 15 minutes.
Right , I actually did that on the the large portuguese cut I did last year . on this one it didn't seem too much excess material to bother with, plus you have to be careful not to scratch the pav. or polished girdle when you take it to the saw. I just did another large Portuguese quartz but this time I did a better preforming job so the crown end wasn't as big. thanks for commenting.
@@tennpikr74 A while after I posted that I had a sudden concern about cross contamination from the saw blade/water. I suppose you'd have to be extra careful about cleaning the specimen before grinding.
Lovely work, by the way. You, and other youtubers like yourself, have inspired me to design a cut of my own. and I can visualize the finished form already. I'll begin researching how to make that table of angles and depths.
@@garrettragsdale4826 hello, i do clean the stone somewhat after sawing but im not extra careful since when i start the grinding im always using a very coarse disc so i never have had contamination on those discs that i know of.
congrats on designing your own gem cut. one of these days i may try also. thanks for your comments. do you use any computer programs for designs?
@@tennpikr74 When I find the right faceting machine I'll make a video about my new design. I'll link it to you. Thank you for inspiring me.
Gorgeous cut.
I would love to see what faceted non-transparent rocks would look like. Things like marble, granite, obsidian etc...
They look nice , i have never done one myself.
قبل ثانية واحدة
Hello how are you:
How do I get such a machine.
I have an opal stone, one piece 3/900 kg.
Thank you for your kind cooperation
They are for sale in this country, USA here:
www.facetron.com
Hi! How I can get that polish? What kind of disc I need, and polisher? Sorry for my question, I'm rookie in lapidary. Thank you and congratulations!
After you get the facets cut to the 600 grit stage you must prepolish at 3000 or 8000 grit. You can buy precharged laps here: www.shop.lightninglap.com or you can buy copper or zinc laps that you apply diamond paste to. Once you have prepolished the stone i use a lightning lap cerium oxide lap to final polish.
The zinc and copper laps can be purchased here: www.gearloose.com. happy cutting.
wow you've got some patience. I get bored cutting stones over 10 carats. I would like to cut a quartz big enough for a walking stick knob though
Thanks, yes my patience was tested on this one, total cutting time was 36.5 hours.
You should make a stand that can fit around the lantern/or lantern can rest in between and get another scaple. To rotate between hot and cooled blades
thanks for the suggestion, i also had another suggestion using a soldering iron to melt the glue away.
Man I am in such awe of your skill and I only ask this out of curiosity, but what were those little seemingly subsurface scratches on the bottom of the gem when it's rotating on the rotating presentation platform at the end? 23:16 it's pretty apparent, but I'm sure you know what I'm talking about. What is that? Imperfection in the glass?
Thank you. There are imperfections that seemed to be invisible early on then appear as i cut further. They look like hair like inclusions. I did have lots of scratching issues with the cutting and polishing , you might be seeing tiny scratches also.
@@tennpikr74 Super interesting stuff, sir. Thank you for taking the time to teach me!
So I keep thinking as I watch these videos: If one of you guys were to produce and then market a tiny little treasure chest filled with relatively cheap but pretty gem stones, I'd pay quite a lot of money for it. Maybe different sizes, different qualities up to very expensive versions with better gems and maybe tiny little gold coins or something lol.
There are quite a few of us IT nerds with expendable income who would absolutely love the idea of owning our own little actual treasure chest with actual treasures. You could market it to gamers and collectors.
Sorry if it's a dumb idea lol!
And thanks again, sir!
Woooowwwzers man, that thing shines! 💎
Thanks, i sold that stone pretty fast.
Great video! What a piece of art!
Thanks very much.
I love this art I am prospecting for precious stones in Yemen I want to own such machines the right to polish stones How much does this project cost?
Hello. the machines cost $3500 usd to $4000 usd.
@@tennpikr74 thank you for replying Ok, from where can I take these tools?
www.facertron.com or www.ultratec-facet.com
Wow. Very nice. Thanks for the close video and clear steps you took. I was thinking it would make a pretty cool shiftier knob. Love the color. Lets hope green lantern doesn't see this. Lol
Thanks for watching.
is it just me or in the segment where you are showing the gem off outdoors you can see some marks on the table that indicate you had contamination in your final polish compound of a much coarser grit?
That is what glass will look like when the sunlight hits it just right. Those marks are invisible everywhere else but direct sunlight. If i had polished further with 100 k or 200k diamond those might not be visible.in the sunlight . Thats my take on it anyway.
Nice work that is absolutely stunning.
Thanks very much.
You are an amazing and unique person like ur job I really appreciate ur work man ... and I really loved that gem
Thanks very much.
Great info...Thx for sharing...The finished stone looks great...how long did it take?
Thanks, this one was around 35 to 40 hours.
My 1000 grit polish looks like your 240 grit polish. What am I doing wrong?
Your lap must be a newer one . My 260 is well worn but still works ok for this material. Once a lap has worn down it will start leaving a smoother finish.
I kinda thoght you were gonna take us to a rock pile you had of shiney gems, kinda like well that was fun here tresure pile :P looks great thogh that bubble thogh>.
Such a big beast, how many hours?
Yes it was, 40 hours for this one.
What machine do you use? I am wanting to cut a large stone that cannot be smaller than 40mm finished.
I use a facetron machine, The finished stone was 48 mm in diameter.
I want it...Lol😳😝😂 Very beautiful piece ❤ ❤ ❤
Thanks very much.
Where are you getting these gemstones I need namita
sometimes a local gem show, other times i use ebay.
and where to insert such a large stone ?! ))))))))
I leave that to the new owner, some that have commented have mentioned putting it in a wizards scepter .
this might be a stupid thing to ask but im designing a watch for my brand and I was wondering if their was a way to to tunnel in a 4mm by 12 gold word inside something like moissanite aha :P
I havent heard of anyone ever doing something like that.
@@tennpikr74 oh well guess ill just mock it up and ask manufactures thanks anyway :)
Спасибо что делитесь опытом и знаниями и на большом изделии показали как правильно наносится огранка. Огромный лайк и подписка. 👍
Wow that's a whooper! Polishing must have been tedious. I'm wonder where you got your splash guard 3D print? I'm tried of bulldog clipping my splash guard for girdle cuts and I'm ready to chop it up.
Hello, yes polishing and cutting the table was a real bear, it took around 4 to 4.5 hours total. I thought i would never finish the polishing.
the splash guard gate is from a faceter named terry gump, here is his email: tfg.lapidary@gmail.com. Thanks for watching.
Great Job .......
I appreciate your hard work and passion but after all this is a piece of glass, not a gem !
Am a wrong ?
It looks soooooo beautiful !
Yes , not a true gemstone. it is virtually worthless. I did this purely for the challenge of cutting a very large piece. Im just used to calling them all gemstones. I had to choose the glass as anything natural or a precious material would be unobtainable in this size or astronomical in price.
I guess i might have been able to find a piece of cz but then it would have cost at least $100 . This piece only cost about $8.00.
Good afternoon Sir. !
Where can I get my Stone Cut too and how much you charge ?
Thank you for sharing your video
contact me at gemsbymbk@gmail.com
@@tennpikr74 hi
@@tennpikr74 I want to talk with you
@@rashiquerashi2216 email me at gemsbymbk@gmail.com
Nice, great job. HUGE!
Thanks.
how do I do tell what kinda stone I have
You would need to have a gem cutter examine it.
I'm truly inspired from your videos thank you!!!
Beautiful
Thanks very much , its a lot of fun for me.
Watched this video about 3 times now for reference and it's been a huge help! 2 questions: Did you use a jig to set your dop stick and let the glue harden? Also what kind of dop stick are you using? Thanks in advance!
hello, i did use the jig while the glue was setting up, i used a cone dop as the sphere is round and it would work the best. After i slid the moving part of the jig together to touch the sphere , i have to keep moving the whole thing and turning it so that the glue wont run off or to one side until it set s up, usually about 2 min. or less and it stops flowing. after that i mixed up more glue and built it up around the dop. i didnt want to take any chances for it coming loose.
@@tennpikr74 Okay that makes sense. I have been using my lathe to keep it turning for me, but it's a rather large machine so I would like to find a more practical way of setting the dop stick. Any links to a recommended jig that I could buy? Thanks for the reply!
@@calebanderson3951 I recommend the jig made by poly metric , zane the owner can set it up to work with ultra tec or facetron dops as well as any 1/4 in. dop. I made a video recently comparing a couple jigs .
www.polymetricinc.com
I don't give a damn if that is just glass...that is very beautiful!!!
thanks very much.
Thank you! Very nice work.
Boa noite gostaria de saber que cola vc usa ?
Olá, foi uma cola epóxi de 2 partes.
So your meet points are correct? Not complaining, just this is what Im learning now. Music is crap but mute works for me.
Meets probably not perfect . I was still learning to edit and put videos together back then, so the music was probably too loud in those early ones.
You say that you ran into several problems with this "gem" because it was a 5.5 on the Mose scale.
Is that because the "gem" is to soft or to hard? I know the Mose scale goes from 1-10, with diamond being 10 and ruby/sapphire being 9, and most steels bring in the 5-6 range.
Yes , the softer gems can be troublesome to polish as they scratch easier than hard ones.
how many hours is this really
40 hours total.
Hi can you tell me which epoxy glue you are use?
Im currently using vera chem brand . I have used gorrilla brand and didnt see any difference.
Which glue you can advise to me?tell me name please
@@guseinchavtarayev4870 www.ebay.com/itm/Devcon-35345-Clear-2-Ton-High-Strength-Epoxy-Glue-Waterproof-Adhesive-35345/301715905837?epid=2254342055&hash=item463fab5d2d:g:TLsAAOSwkCZcfvJz:sc:ShippingMethodStandard!32765!US!-1
that would make for a very interesting knob on a cane or door handle
Yes, i might make a few soon to be sold as that.
Hello. And can you say what diagram is it?
Its called huge gem 2 by faceter glenn klein,
look for it on this website: facetdiagrams.org/
thank you for your answer!
That is amazing I love to cut lab made obsidian that is a so good 😊 to see someone else cutting the same style of mineral the saying more to life than a diamond you have prove this that is a ripper well done.
Thanks very much.
Gems by mbk just good to see some else working this style of mineral at the moment cutting a piece of orange 🍊 lab grown obsidian love my greens and oranges and your self.
@@danielvecchi9939 Thanks, daniel, some say the glass stones can be dangerous to cut with the lead or boron additives . They can make some pretty gems.
Gems by mbk l love faceting have you ever tried to polish on a vinyl lap and if not what are yours reasons for this just would love to know. What is best minerals you can easily polish than other minerals.
@@danielvecchi9939 No, i have not tried a vinyl lap, actually i have not seen any available. That would be a lap to be used for soft gems which i have not cut many. Im getting good results with the laps i use now. The easiest i have polished would be sunstone feldspar, topaz, zircon, garnet. the harder ones are peridot, cubic zirconia, sapphire, quartz.
Reminds me of a door knob o had similar to that.
Son derece güzel bir kesim işçiliği uygulanmış. Elinize sağlık başarılar dilerim. !!!!!
Çok teşekkürler.
Nobody can deflect the Emerald splash
Hey! great job! quick question, where did you get the sphere from?
It was either from ebay or amazon, they both sell them.
Bela obra de arte, espetacular.
obrigado
10:30 when you staryed gliding along the sphere surface the glue seemed to come off really easily
i had heated it , thats why.
Nice cut
My wife knows I'm focused when the facetting porn music is in the background. I've learned a lot watching you work. The stones you cut are always glitter bombs.
Thanks very much brandon.
Came out beautiful
ได้ผ่านจากการ ซึ่งได้เจียรไนแล้ว สุดยอด ของความ สวยงาม มากมาก เลย ครับ ผม
ขอบคุณมาก ๆ.
Nice bedroom door handle for mr.Bezos.
Have a good a d safe day.
Thank U..for the nice video.
Que trabalho show viu parabéns um belo trabalho aí vai o joinha da família jota fuiiiii
Obrigado.
please help cause no o e has been able to identify what I have
send a picture to my email adress , ill try to identify it.
what is the email address
@@bizimac123 gemsbymbk@gmail.com
Such a beautiful stone. Reminds me of my birthstone. Peridot
Yeah this is clearly a scam ran by one dude and two accounts. People please don’t listen to these two ⬆️
whats estimated price?
sold for $75.00 usd
@@tennpikr74 woow, very cheap
@@mateuszcielas3362 Yes because its glass, theres not a big value.
@@tennpikr74 glass? ok didnt see that, i thought its natural
I love your work 😊😍
thank you, this one took a lot of patience.
hasle un corte portugués.
Muy buen Corte 👍
What do u call this machine which u stick u r gem?
The machine i used to cut the gemstone is called a facetron faceting machine.
Very informative :)
Wow i want to learn this thank you
สุดยอด ผลของจากการณ์วิจัย ได้ผ่านกรรมวิธี เป็นขั้นตอน จากการณ์ที่เจียรไน ซึ่งได้อัญมณีที่สวยงาม และสุดยอดจากแร่ธาตุ อันเป็นที่มาของแหล่งจากธรรมชาติ
ใช่แม้ว่านี่จะเป็นแก้ว แต่มันก็เป็นอัญมณีที่สวยงาม แต่ฉันก็ไม่ได้ตัดออกเพื่อความสนุก แต่ก็เพื่อความสำเร็จและความสำเร็จ
What is this green stone?
It is made in china of boro silicate material.
..ini sama ama batu saya cuma kecil kalau dilihat biru kehijauan sinar pantulannya hijau ....kalau memang bener bener batu dites huruf kalau ditempelkan hurufnya membesar......itu asli permata
Ficou lindíssima parabéns
obrigado
Saya mau membeli peralatan machine cutting di mana bisa di dapatkan tq
Berikut adalah beberapa di Amerika Serikat, tapi saya pikir Anda dapat menemukan beberapa di India atau Cina. Bwww.rockpeddler.com/product-category/faceting-machines/www.johnsonbrotherslapidary.com/Faceting.htmlwww.ebay.com/itm/FACETING-MACHINE-ULTRA-TEC-V2-GEMSTONE-GEM-LAPIDARY/303154925335?hash=item4695710f17:g:GkwAAOSwhoZc21vy
Nak mast type atau hand piece.. mast type ni harga dia mahal, hand piece, saya recommend sterling dari sri lanka..
Is it a marble ?
It was a sphere for gazing , etc. they are sold on ebay, etsy, amazon, this one cost around $8.00 usd
Taglio perfetto complimenti! Però su una biglia di vetro....
grazie, sono molto economici da acquistare, ca. $ 8,00 dollari americani.
It's so beautiful. 😊
Thanks very much.
สุดยอด ของ ความ สวย ความ ใส และ ความ เงา งาม ด้วยวิธีกรรม ตามขั้นตอน หลังจากการ ที่ได้เจียรไนแล้ว สุดยอด ของความ สวยงาม ครับ ผม
ขอบคุณมาก ๆ
Wonderful work.
Thanks very much.
Superb. It does look a little doorknob like though.
Hocam çok zaman ve emek vermişsiniz elinizesaglik...saygılar
ไม่อยากจะเชื่อเลย ครูเก่งมาก
You are FANTASTIC !
Ha ha , I dont know about that but thanks for watching.
@@tennpikr74 how long do the lapidary wheels last? Do you have to replace them often?
@@jimbuxton2187 if you treat them well, cleaning them after every use , some can last over 10 years.
@@tennpikr74 wow! Thanks for all your beautiful informative videos!
@@jimbuxton2187 Thanks very much for watching.
Wow .
Jinab .
MashAllah
Perfect gem cutting 💎💎💎💎💎👍
Thanks , i strive for perfection but it always eludes me.
it's looks black but small size pieces it's actually yellow
Woooow! 🤩🤩🤩
good when there is good equipment
Pure glass😜
Show muito lindo maravilhoso magnífico trabalho parabéns super like abraços
Obrigado.
Looks like glass gem.
Exactly.
Good art .briliant
I wanna buy it 😍
Sorry i sold that last year.
Congratulation!
Thank you, this one really tested my patience.