The case having a holding compartment for raisers and screws... that blew my mind. I will die before I could get anything like that, but that is just super cool!
The structure of the video is once again enchanting and captivating. You always manage to inspire great enthusiasm in me. It's not just the great hardware, no, it's the whole video that's incredibly powerful. Love it ❤👍💯🙏
The TD500 Max is not just a case, it's actually a bundle of case (TD500 Mesh V2), AIO cooler (ML360 Atmos) and PSU (V850). We may call it "cooling solution" rather than "case" alone.
😂 yessss! Truthfully, off camera, that would’ve been entirely possible! I think I could’ve built this in 15 minutes…. Timelapse on the V2 channel later this week? 😏
I haven't hit over 72c on my air cooled i7 12700k during the heaviest gaming, rtx 4070 super from galax stays below 65c. Way better than my old Master Box Q500L which did not fit the card even lol
i'd slather thermal paste all over the top of the cpu for that huge heatsink, those 7 hexagons don't seem enuff. But what do i know, i'm a barbarian. Good build, btw.
I didn’t think it was enough either, but I did remove it off camera and the spread was perfectly fine. It didn’t remove the doubt I had initially (at the time of filming) though haha
Hilarious to see AIO radiator used as intake... especially with intel platform where gaming CPUs stay at 250W out of the box. And most of gaming boards blow up power limits to 450W.
Holy Marry, that airflow was fast as like screwdriver fly away from your hand. I'm waiting to see Fractal North XL Black Tempered Glass video. Can you, please?
Hi Mat! Great work, as always! Do you think you could do a video clasifying the best pc cases you worked with so far? From style to airflow, performance and how easy it is to work with. I think that your opinion on this matter would be very valuable and appreciated!
I've watched a couple of your videos now and the quality is top tier. I just subscribed. Great music in the video...can we get the credits to the songs played?
Идея с выносными коннекторами кабелей питания процессора и материнской платы крайне сомнительна. Лишние соединения никогда небыли полезными. Только если у вас блок питания с очень некрасивыми проводами, тогда чисто визуальная составляющая выиграет. Сам дизайн блока достаточно интересный.
That’s quite a tall order. I’d have to counteract you with “that would depend entirely on the hardware”, as not all cases are designed to be at their maximum potential with an air cooler, for example 👀
i still dont get that with the thermal paste and the stupidity to use it. seems CM watched a lot of influencers using TP and decided to use templates now for that. that is crazy. i still do it how professionlas do it. using the smallest amount possibile and smear it with a finger cup evenly distributed over the cpu. if you cant read the prints on the cpu any more, you used too much. you just need a film.
ignoring the fact that this is meant to be simple, my only change would using the radiator fans as pull instead of push, in my personal experience it helps a little bit with dust and cleaning
Hi Matt in most build guides I have seen that in a aio the radiator line should be higher than the cpu block to avoid air bubbles but here it is not the case. Do you think it’s a issue
i prefer aio radiators on top.. aint that better for pumps too and heat flow since hot air risesbetter to have it top so it can radiate away more easily.
White LED on fans and pump, but yellow on RAM. That is because Fury Beast have absolutely worst white LED of any RAM modules. I know I had them, sold `em and bought Corsair Vengeance.
I mean, their white tends to shift more towards blue on the fury beast RAM, renegade however does perfect white. That noted, I didn’t set it orange for that reason, I set it orange to contrast nicely with the motherboard accents without being overpowering 🤓
Ive never seen a case with a pre-installed aio. Super weird. Especially the thermal paste instructions for it.. lol Have to say really looks decent for a coolermaster. Im glad they have started to embrace mote minimal branding. I have a suuuuper old case from them and it just screams their logos everywhere on it.
Haha yeah I remeber their older hardware and cases being heavily branded. CM seem to be going in the right direction for their brand and I’m excited to see how they progress this year 🙌
@@Mr_Matt_Lee The silkscreen method is usually how they apply at the factory but it has more holes than this and creates a wider pattern. Also done by a machine so its cleaner and causes less waste than what a user might do with this manual method. They should have just not bothered with it.
I think that there is a discrepancy in this build. The pump should always be lower than the attachment of the pipes on the rad, so to avoid bubbles in the pump, am I wrong?
Interesting idea. But, IMHO, Seasonic connect with case looks more interesting. And you lose all the joys and emotions from the process of routing cables as you wish :)
@@Mr_Matt_Lee Sorry, I mixed up the names a little - Seasonic Connect is a PSU and Seasonic case has name Syncro Q7. And Connect uses similar concept as Syncro PSU. Upd. Seasonic has another case with Cimnect PSU - ARCH Q5. But your vision, build and review for Syncro would be good to see
Wonderful video no doubt about that.. keep such videos coming at regular intervals it surly keeps Us PC enthusiasts running. Just a query that i was having since long, what kind of smoke do you use or can be used for the airflow visualization ?? and how is any smoke different from the smoke coming from the cigarette ? (as its been seen the cigarette smoke causes stickiness inside the case and all hence the query.) thanks
My Cooler Master TD500 is scared watching this
😂😂 actually made me laugh. Had visions of your TD500 trebling on the desk and crying thermal paste eveywhere.
@@Mr_Matt_LeeHi guys, everyone. Who knows, tell me the name of his mug? Model? Title
With the gearseekers at the end 👌🏻 thanks Matt!
I always find the time during the week to absorb my boy Nick and his partner in crime, Klaire! 😁
This is a great looking built. i didn't know that cooller master cases have started coming with AIO pre installed
Yeah they’ve had their Max lineup for a while now, most notable with the NR200P, it’s great to see them moving into Mid-tower with it too!
The case having a holding compartment for raisers and screws... that blew my mind. I will die before I could get anything like that, but that is just super cool!
When ever that smoke machine makes an appearance 🔥🔥🔥🔥
It comes in hard! 💨💨💨
nah, he's just vaping
The structure of the video is once again enchanting and captivating. You always manage to inspire great enthusiasm in me.
It's not just the great hardware, no, it's the whole video that's incredibly powerful. Love it ❤👍💯🙏
What a wholesome comment 🫶 Thanks bud! Always a pleasure to inspire! Hope you have an awesome week ✌️
@@Mr_Matt_Lee ❤👍😊
I was thinking the same!! My god, Im about to c#m every Time I enter into This channel! Amazing!!! 😂
There are no more excuses for being afraid or lazy to build a PC and still find time to practice throwing screwdrivers in the air 😅
Imagine Mr Matt Lee making a video of building PCs of the best parts of their generation era for the past 20 yrs and displaying their air flow
man, the production is always topnotch. Amazing. Thank you Mr. Matt! Hope you have a great day
Thanks so much 😁 Have a freaking awesome week yourself 🙌
Hi guys, everyone. Who knows, tell me the name of his mug? Model? Title
The TD500 Max is not just a case, it's actually a bundle of case (TD500 Mesh V2), AIO cooler (ML360 Atmos) and PSU (V850). We may call it "cooling solution" rather than "case" alone.
Its very cool but what the price
That screwdriver spin and the tuf gaming motherboard never gets old in this channel 😂
😅 imagine forever being known as the ‘screwy D flipper’
and those noodles were still steaming hot you built it so fast! Mad!
😂 yessss! Truthfully, off camera, that would’ve been entirely possible! I think I could’ve built this in 15 minutes…. Timelapse on the V2 channel later this week? 😏
@@Mr_Matt_Lee V2 channel ? which one ?
@@AsvinThakur391 it’s linked in the description, or search TH-cam for Mr Matt Lee V2 ✌️
one of the best pc building channels, I don't miss any videos
I haven't hit over 72c on my air cooled i7 12700k during the heaviest gaming, rtx 4070 super from galax stays below 65c. Way better than my old Master Box Q500L which did not fit the card even lol
Awesome case, but The Bridge Cable need replacement
I agree, they could be refined a little more, but they are very usable which is the main thing ✌️
i'd slather thermal paste all over the top of the cpu for that huge heatsink, those 7 hexagons don't seem enuff. But what do i know, i'm a barbarian. Good build, btw.
I didn’t think it was enough either, but I did remove it off camera and the spread was perfectly fine. It didn’t remove the doubt I had initially (at the time of filming) though haha
Смотрю что б насладиться качеством
Hilarious to see AIO radiator used as intake... especially with intel platform where gaming CPUs stay at 250W out of the box. And most of gaming boards blow up power limits to 450W.
Building a PC is like a puzzle, but with more RGB lights and fewer missing pieces - thanks to the Cooler Master TD500 MAX!
Where has this case been all of my life? Love your videos, well made, excellent music.
Holy Marry, that airflow was fast as like screwdriver fly away from your hand. I'm waiting to see Fractal North XL Black Tempered Glass video. Can you, please?
Considering this case for next the next build. Waiting on the new gpus though. Great build! 🎉
Chilling and satisfying to watch.
I would use 7800X3D for gaming instead of Intel CPU ;)
Nice video Matt. Btw I don't think the two CPU power bridge connections are useful, especially when I want to hide my cables as many as possible
Hi Mat! Great work, as always! Do you think you could do a video clasifying the best pc cases you worked with so far? From style to airflow, performance and how easy it is to work with. I think that your opinion on this matter would be very valuable and appreciated!
I've watched a couple of your videos now and the quality is top tier. I just subscribed. Great music in the video...can we get the credits to the songs played?
hai matt lee, can you build pc full AMD?
Haiiii! I’ve built quite a few full AMD PC’s here on the channel already, and will continue to do so 🦾
The future on PC Building is without Screwdriver. Only bigger Screws thats it!
Идея с выносными коннекторами кабелей питания процессора и материнской платы крайне сомнительна. Лишние соединения никогда небыли полезными. Только если у вас блок питания с очень некрасивыми проводами, тогда чисто визуальная составляющая выиграет. Сам дизайн блока достаточно интересный.
How I wish im that relax when building a PC.
Elegant build as always! My question is: what smoke machine are you using? :D
Best case for best airflow, lowest thermals, and highest performance?
That’s quite a tall order. I’d have to counteract you with “that would depend entirely on the hardware”, as not all cases are designed to be at their maximum potential with an air cooler, for example 👀
@@Mr_Matt_Lee I was thinking more like best case for a 420 or 360 aio with a beefy Red Devil 7900XTX and 7800X3D. Love your videos!
This adapter cables looking so bad... would never recommend this case.
me waiting for quadruple 4090 and threadripper 7995wx 🗿
Whats the référence for the cpu cooler ? I just discovered this Channel and i like it
i still dont get that with the thermal paste and the stupidity to use it. seems CM watched a lot of influencers using TP and decided to use templates now for that. that is crazy. i still do it how professionlas do it. using the smallest amount possibile and smear it with a finger cup evenly distributed over the cpu. if you cant read the prints on the cpu any more, you used too much. you just need a film.
What cable extension did you use? They looked stealthy enough without the RGB.
3:51 insufficient thermal paste.😂
😂
Hi Matt, I need a build with at least 3 200mm fans, what's the best case? I need to move lots of air!
Chinese PC builder they're pretty good at cable management.
The case is so mega-cool, that it connected itself to the f_panel motherboard without the help of a Matt Lee 🤣🤣🤣
It would be nice if you could make video that compares gpu and cpu temps the build where you used same gdu or cpu
ignoring the fact that this is meant to be simple, my only change would using the radiator fans as pull instead of push, in my personal experience it helps a little bit with dust and cleaning
Luv my Cooler Master chassis in white. I get awesome temps. 👍 !!! 👍 !!!
Would like to see the cpu cables terminate closer towards the rear exhaust fan but still very cool.
I saw the doubt you had about the thin dots of thermal paste, did it turn out to be enough? If anything I'd have left them a tad thicker.
The front panel of this chassis plus some updates and you've got a new version ot the Cosmos.
Mr. Matt Lee, your video's and the quality of them is pure art and masterful. Thank you for sharing this with us.
Hi Matt in most build guides I have seen that in a aio the radiator line should be higher than the cpu block to avoid air bubbles but here it is not the case. Do you think it’s a issue
thats my current case , its pretty awesome n very premium built feel to it suprisingly light to lift too
Awesome Bro! Clean Classy! ☕️👌🏻💪🏻 Keep Up!
I made that same suspicious look about the amount of thermal paste they wanted on the cooler
The build looks gorgeous!
I was on the fence about the color of the case at first, but it definitely grew on me! It’s awesome for sure 😁
My two fav pc builders. That's awesome!
passthroughs are good idea but would be so much better if they lined up
Bro why are you always watching about Rimac Nevara ?
Build looks good and all but how do them super noodles in the pot compare to koka noodles? 🤔
Great build and good video quality man..keep it up
It’s call wasted, it a a dumb pc build worse than soft porn
Music from video - perfect! Luv ur style!
MML, you're builds never disappoint! great work!!!
i prefer aio radiators on top.. aint that better for pumps too and heat flow since hot air risesbetter to have it top so it can radiate away more easily.
Great content as always!! Looking forward to a micro atx build 7800x3d with 4070ti super! Would love to see that 😅
That could be good fun! 😅
4080 CAN USE IN THIS CASE??
Yup! 🦾
somethimes i wonder what you're favorite colour is
next build use magic stick concept, abra cadabra hahahaaha
White LED on fans and pump, but yellow on RAM. That is because Fury Beast have absolutely worst white LED of any RAM modules. I know I had them, sold `em and bought Corsair Vengeance.
I mean, their white tends to shift more towards blue on the fury beast RAM, renegade however does perfect white. That noted, I didn’t set it orange for that reason, I set it orange to contrast nicely with the motherboard accents without being overpowering 🤓
Beautiful case, amazing video ❤
I'm courious about a build inside a Lian Li DK-07, a master built by elements and price 😁
Hmmmm. That could be fun to be fair! A desk PC build would be different for the channel and a unique twist.
What do you do with all these computers?
They despawn after a few days, never to be seen again 🫡
@@Mr_Matt_Lee ;)
Gpu suffocates😢 no bottom intake is trash case.
Day 1 of asking an aesthetic and free pc from you
I dunnoo, i think white one would have worked better on this one.
Ive never seen a case with a pre-installed aio. Super weird. Especially the thermal paste instructions for it.. lol
Have to say really looks decent for a coolermaster. Im glad they have started to embrace mote minimal branding. I have a suuuuper old case from them and it just screams their logos everywhere on it.
Haha yeah I remeber their older hardware and cases being heavily branded. CM seem to be going in the right direction for their brand and I’m excited to see how they progress this year 🙌
had a coolermaster mystique 631 back in the 2000s. that's the 1st of their minimalist cases.
When I use an air cooler. Should I put one or two fans on top?
Not sure I like the way the radiator is mounted on this.
Where was a case like this when I was first learning to build?
Matt why your build's everytime only based Intel? You doesn't like AMD?))
There has been multiple full AMD builds on the channel over the last couple of months alone 🫡
Matt, what website are the Gpu cables from please
Love From pakistan we want one of you in paksitan
plz do the cooler matser nr200p v2 ppppppllllzzz!
That can't possibly be enough paste.
I took the cooler off (off camera) to check… it was actually enough. Though, the application method was questionable.
@@Mr_Matt_Lee The silkscreen method is usually how they apply at the factory but it has more holes than this and creates a wider pattern. Also done by a machine so its cleaner and causes less waste than what a user might do with this manual method. They should have just not bothered with it.
2:14 that HyperX Renegade ssd was reused like 100 times at this point.
It’s been around the block, but we must take the time to appreciate true living legends, not hate on them 😂
Very nice looking case actually :)
AIO gg.
I think that there is a discrepancy in this build. The pump should always be lower than the attachment of the pipes on the rad, so to avoid bubbles in the pump, am I wrong?
The pump should always be lower than the highest point of the radiator. Not necessarily the attachment of the pipes 👍
Wait, that paste section, u can do that? Sick
When do you think it will be available?
You eat lunch to Gear Seekers too? Nice
my one concern is hot air will be pushed in the system
Interesting idea. But, IMHO, Seasonic connect with case looks more interesting. And you lose all the joys and emotions from the process of routing cables as you wish :)
I need to check out that Seasonic case actually! Thanks for the reminder 😅
@@Mr_Matt_Lee Sorry, I mixed up the names a little - Seasonic Connect is a PSU and Seasonic case has name Syncro Q7.
And Connect uses similar concept as Syncro PSU.
Upd. Seasonic has another case with Cimnect PSU - ARCH Q5.
But your vision, build and review for Syncro would be good to see
HonestLee the BEST pc building channel that I'm watching. ⭐️⭐️⭐️⭐️⭐️
Fractal North XL soon?
I like to think so 👀 🪵
Love your videos, bro ❤
Greetings from Yucatan, Mexico.
Pd. I have the TD500 Mesh.❤
I found your channel a few days ago, I helped my nephew build a TD500V2 a week ago, and now I saw this! Your videos are 0000rg4smic 😅
Wonderful video no doubt about that.. keep such videos coming at regular intervals it surly keeps Us PC enthusiasts running.
Just a query that i was having since long, what kind of smoke do you use or can be used for the airflow visualization ?? and how is any smoke different from the smoke coming from the cigarette ? (as its been seen the cigarette smoke causes stickiness inside the case and all hence the query.) thanks
lately Coolermaster offer their cases with pre-installed cooler and psu... they are quite smart!... Nice video as always (another TUF ;D)
I wish i can experience this rn. But I'll just have to wait and save up slowly. Extremely clean build tho, the kind that I want.
dude, I chimed in for the coffee...wtf NOODLES!!! no lie the noodles looked good
Hello mate great vid as usual 👌 I just love watching them.. Watching from Philippines 🇵🇭