How To Assemble Inline Speed Skates
ฝัง
- เผยแพร่เมื่อ 9 พ.ย. 2014
- The majority of inline speed skates will come un-assembled to allow the skater the ability to build the skate to their specific requirements. This video goes through an in-depth, step-by-step process detailing the common guidelines for assembling most inline speed skates.
Be sure to watch the entire video for all available information before attempting to build your skates, and be sure to visit our Learning Center for more information.
www.inlinewarehouse.com/fitlea... - กีฬา
Ensure the wheels spin for three solid seconds. If they don't, you have cheap bearings or dirty bearings, or you've installed the wheel too tight. This guy makes it seem like you have to use all your energy to tighten down the wheels. Do NOT overtighten them! Otherwise good quick video.
When removing bearings, notice you can't just push on the wheel from one side. You have to PULL the first bearing out, not PUSH it in. You need a tight pen cap or something to PULL with. Then poke through the empty hole to push out the second bearing. Each wheel has 2 bearings.
Put in all wheels before putting any rods/screws in. Tightening the outer wheels first.
Can I jump straight to 125 and 110 low cut race boot setup? I've been inline skating the past 20 years in agressive skate s and fitness skates.
Been skating on 125 wheel setup on the last 3 years in a R6 and Prix and been doing ankle and balance workout exercises twice a week for past 12 years, so yes I have strong ankles
Absolutely. You didn't jump straight to thtem having skated teh R6 and Prix.. You should be well equipped to handle the low cut race boots and will quickly adapt the added in range in motion and add it to the arsenal of your skating expertise. I think you will enjoy going back to your R6, Prix once in a while, but you'll love your race boots for what you can do on them when you want to do it. You are ready to lock and load.... InlineWarehouse.com
Hello i am OhenebaSam and i love to skate even though i am a beginner, but most importantly i want to establish a skate-shoe shop in Ghana how can you help me out
First off, thanks for watching! As for setting up a shop, the best route is to reach out to the brands you wish to carry directly to see what you need to do to carry their products. Good luck and hope you have a skate day!
hey i have some kates and i wanna take the frame off and they are super stuck and i cant get the screw out.
Try heating up very carefully with a hair dryer or similar. This often will free up any thread lock.
Thanjs
my foot size is U.K 12.5-13 can someone help me suitable inline skates of my size ?
You can try the Rollerblade XL that goes up to size 17, but a Rollerblade Cruiser or RB 110 3WD in size 14 should also work. All found at InlineWarehouse.com
The break????
? These are speed skates, they don't come with a brake, I don't know if that's what you're referring to 😅
Good evening sir.
How much price
Visit InlineWarehouse.com for pricing on any model you are curious about. Thank you! IceWarehouse.com and DerbyWarehouse.com also available.
How much the skates u r having costs?
Go to InlineWarehouse.com and you can see all prices. Assembly is free.
@@InlineWarehouseFitness did this ship in canada?
@@InlineWarehouseFitness plz reply sir did u ship in canada?
@@andseemagicinnutshell5760 Yes we ship to Canada. Please go to the site and you can order there. InlineWarehouse.com
this video is good but well should not very tight