I took a chance on them too. However, most of the bad reviews I’ve heard revolve around either damaged parts in shipping or service on the Pi/image/roms. Through a lot of trial and error of falling into the hobby, I made my own Recalbox image with just the games I wanted (so I had no need for the GRS image/pi he supplies. These companies would have so much less of a headache if they stopped including the games). As for the mid size cabinet I bought, it turned out really nicely. But the cam lock system sucks and it’s a pain to put together, and a few things here and there had to be done (has to sand down the plexiglass corners on the control panel, as the corners were SHARP).
I appreciate the feedback! I'm very happy with the machine myself and it gets a ton of compliments (and play time). Thanks for taking the time to leave a comment!
Great review and nice arcade. Good info 👍🏻 Just picked up the same control panel with the cabinet ✊ Unbox and build vids coming. My experience with GRS has always been rock solid. Picking up some L Brackets tomorrow before I build it!! Thanks for sharing!!
Thanks for the review. I'm still on the fence with everything I've heard about GRS but I will follow along with reviews like yours to see if they start trending in the right direction.
As a follow-up, I did receive a second unit with a golden tee theme. Came out GORGEOUS. I had no issues with that one either. I have since upgraded this one to the wolfonoz 12k image. It wasn't that the other image was bad (it was amazing). It was that I wanted a bit more lightgun support.
good job! i worked to my old neo geo mvs cabinet from 94/96. i painted yellow and blue with blue t.mold. i need some great generic graphic to apply like yours
Great video. I'm new to all of this. How did you change the overclock. Whenever I go into the settings, it says there was an error running option P1 overclocked?
Hi, Everything looks great! I like how you reinforced it with the brackets. I can see how you might wantvto add more hinges. Question. If I didn't want to use the Pi4 would one be able to unplug the usb for the control deck from the Pi4 and plug it into a computer so you can get more games and be able to expand it more?
Great question! The system offered from GRS comes with some very basic encoders. From my experience, they are either not compatible or didn't work for me as intended. Should you want to go the PC route, the suggestion would be to look up the I-PAC4 encoders found on the ultimarc website. Those will be the best bang for your buck on a PC built 4 way cab. Hope that helped a little.
@@GgAcE Thanks for the quick response. I figured that was the case. I wanted something reasonably priced that is already wired for me. So, maybe the easiest and most cost effective way would be to just get this, an ipac4 and rewire it? I already have the computer. Just need the pedestal. I would love to get one already done from one of those other companies but they are so darn expensive!
@@gregwalzel7504 their customers service was really good to me on both builds. Honestly, you may want to reach out and see if they have a wired solution for you. I know they do both DIY kits and full installed so perhaps they can tweak the build for your needs and ditch the pi4.
That is a sweet panel very nostalgic. How wide is the control panel? Wanting to purchase the full size 4 player arcade cab, with the modern "air carrier" panel. I think that one measures 48 inches wide. I really prefer this shape over the modern since I don't need to add pinball buttons. Wonder if they are able to add this one to their 4 player cab.
@@GgAcE I emailed with Tina at GRS today and she said the PC4 is mid sized. The full size has 6 buttons for each player and optional cup holders.. hope this info helps.
Just watch your video. Does player 3-4 comfortably there. Seems they are to close to player 1-2. And also is it better to have the player 3 and 4 on an angle? Thanks
@kukaratza I have had zero issues with 4 adults playing on this cab since players 3 and 4 are never used for serious fighting games or anything like that. The angle works great for the Simpsons, X-Men, etc. For me, no issues at all.
My go too is the "Miuzei Case for Raspberry Pi 4". Super inexpensive, fan is silent, easy to put together, and overall pretty to look at. I have 3 of them now haha. On-sale you can get them for $11.99 or $15.99 full price. Happy building!
Hey bud! The completed unit is 34 1/2" tall. I just ran upstairs with measuring tape to check for you. I'm 5'11 and it's comfortable to me. I think 6'5 and up would be really hunched over but 6'1 should still be very comfortable.
@@GgAcE I ordered mine today. I had them add 5 inches to the height of the pedestal so that was cool they were able to do that. Thanks again for your info and video!
There are lots of videos on this and the game image I used allows it directly in the settings but it's best to have at least a fan depending on how high you plan to overclock it.
Sorry to disappoint. I gave the image name so feel free to look it up and see gameplay. This review was a review about the hardware more than the software.
Your video sealed the deal for me, I'll be ordering this from them. Thank you!
I took a chance on them too. However, most of the bad reviews I’ve heard revolve around either damaged parts in shipping or service on the Pi/image/roms. Through a lot of trial and error of falling into the hobby, I made my own Recalbox image with just the games I wanted (so I had no need for the GRS image/pi he supplies. These companies would have so much less of a headache if they stopped including the games).
As for the mid size cabinet I bought, it turned out really nicely. But the cam lock system sucks and it’s a pain to put together, and a few things here and there had to be done (has to sand down the plexiglass corners on the control panel, as the corners were SHARP).
What cab did you get? I just noticed some are 1 player and limited a bit .. like the donkey kong looking one etc..
They are also Arcade modup I did hear they are doing better on quality control.. Ive been tempted to order a new cab from them myself.
Great video buddy but I all I have to honestly say about this is “this is such a beautiful pedestal arcade” great work selecting this
I appreciate the feedback! I'm very happy with the machine myself and it gets a ton of compliments (and play time). Thanks for taking the time to leave a comment!
Great review and nice arcade. Good info 👍🏻 Just picked up the same control panel with the cabinet ✊ Unbox and build vids coming. My experience with GRS has always been rock solid. Picking up some L Brackets tomorrow before I build it!! Thanks for sharing!!
Looking forward to the video!
Thanks for the review. I've also had a solid experience so far. Seems like a YMMV situation.
I always appreciate e good cable management when I see it
Thanks for the review. I'm still on the fence with everything I've heard about GRS but I will follow along with reviews like yours to see if they start trending in the right direction.
I actually have another unit (same exact thing but another theme) for a buddy coming tomorrow. I will follow-up once I put that one together.
As a follow-up, I did receive a second unit with a golden tee theme. Came out GORGEOUS. I had no issues with that one either. I have since upgraded this one to the wolfonoz 12k image. It wasn't that the other image was bad (it was amazing). It was that I wanted a bit more lightgun support.
I use them for my cabs. They’re solid. No issues.
There’s a few annoying things you may encounter when putting a cabinet together, but the end result is very nice.
good job! i worked to my old neo geo mvs cabinet from 94/96. i painted yellow and blue with blue t.mold. i need some great generic graphic to apply like yours
looks super clean!
I would also use white glue if that is melamine or wood glue if plywood to sturdy that up.
Great video. I'm new to all of this. How did you change the overclock. Whenever I go into the settings, it says there was an error running option P1 overclocked?
Hi,
Everything looks great! I like how you reinforced it with the brackets. I can see how you might wantvto add more hinges. Question. If I didn't want to use the Pi4 would one be able to unplug the usb for the control deck from the Pi4 and plug it into a computer so you can get more games and be able to expand it more?
Great question! The system offered from GRS comes with some very basic encoders. From my experience, they are either not compatible or didn't work for me as intended. Should you want to go the PC route, the suggestion would be to look up the I-PAC4 encoders found on the ultimarc website. Those will be the best bang for your buck on a PC built 4 way cab. Hope that helped a little.
@@GgAcE Thanks for the quick response. I figured that was the case. I wanted something reasonably priced that is already wired for me. So, maybe the easiest and most cost effective way would be to just get this, an ipac4 and rewire it? I already have the computer. Just need the pedestal.
I would love to get one already done from one of those other companies but they are so darn expensive!
@@gregwalzel7504 their customers service was really good to me on both builds. Honestly, you may want to reach out and see if they have a wired solution for you. I know they do both DIY kits and full installed so perhaps they can tweak the build for your needs and ditch the pi4.
@@GgAcE I will do that. Thanks for all your help! Keep gaming my friend!
That is a sweet panel very nostalgic. How wide is the control panel? Wanting to purchase the full size 4 player arcade cab, with the modern "air carrier" panel. I think that one measures 48 inches wide. I really prefer this shape over the modern since I don't need to add pinball buttons. Wonder if they are able to add this one to their 4 player cab.
Thanks! This unit is 39" wide. Same width as the 42" tv. Absolutely loving it.
This is the mid-size pedestal, right? Not the full size. Did your T-molding already come pre-applied?
This is there "model 4cp bundle" on their website. I am not sure what you mean by mid sized vs full size. I'm sorry.
And sorry yes t-molding and graphics were preinstalled.
@@GgAcE I emailed with Tina at GRS today and she said the PC4 is mid sized. The full size has 6 buttons for each player and optional cup holders.. hope this info helps.
Just watch your video. Does player 3-4 comfortably there. Seems they are to close to player 1-2. And also is it better to have the player 3 and 4 on an angle?
Thanks
@kukaratza I have had zero issues with 4 adults playing on this cab since players 3 and 4 are never used for serious fighting games or anything like that. The angle works great for the Simpsons, X-Men, etc.
For me, no issues at all.
which pie image did u installed?? thanks in advance
How much does one like this cost?
i wish i knew the price or a link to the product you bought so I can consider it as well. they have a LOT of options.
It's the exact model in my title. 4cp with pedestal option. All the other options are configurable to your liking.
would you be able to provide dimensions? (height, width) Thanks.
How much did it cost?
Very cool man
Is that made out of ½ or ¾ melamine?
What case do you recommend for the raspberry pi?
My go too is the "Miuzei Case for Raspberry Pi 4". Super inexpensive, fan is silent, easy to put together, and overall pretty to look at. I have 3 of them now haha. On-sale you can get them for $11.99 or $15.99 full price.
Happy building!
Ok, the height of the pedestal worries me. I'm 6'1 and the height says 31", is this true?
Hey bud! The completed unit is 34 1/2" tall. I just ran upstairs with measuring tape to check for you. I'm 5'11 and it's comfortable to me. I think 6'5 and up would be really hunched over but 6'1 should still be very comfortable.
@@GgAcE I ordered mine today. I had them add 5 inches to the height of the pedestal so that was cool they were able to do that. Thanks again for your info and video!
@@ricojimenez4584 please let me know how it comes out!
I ended up canceling the 4CP order and got the full 4 player pedestal, the big brother. I got it all hooked up last night. It’s beautiful!
@@ricojimenez4584 awesome! Congrats!
nice trackball
Which control panel is that? I see that pedestal on their page but the mid-size control panels they link there don't look like the same design.
Model 4cp under complete bundle on their website. You can order full cab, just panel, or panel with pedestal.
Whats the name of the ball in the center?
It's an arcade trackball
@@GgAcE Thank you brotha.
how do you overclock the pi?
There are lots of videos on this and the game image I used allows it directly in the settings but it's best to have at least a fan depending on how high you plan to overclock it.
so how much did you pay for this ... nyce
Is it just a pi4 or pc
This is running a pi4. Originally ran a virtualman image but now running botecera.
No gameplay footage ? Lame
It’s a raspberri pi running an image that comes with roms. You can find that anywhere online.
Sorry to disappoint. I gave the image name so feel free to look it up and see gameplay. This review was a review about the hardware more than the software.
Can please share what you paid. I see the 4 player console advertised for $400 now, without the pedestal
The pedestal option was an additional $199 on top of the console. If I remember correctly, it was $750ish shipped.
Look up retrolizardarcades