This is a China CRT TV kit, LA 78040, 2003 sound IC etc. A genuine branded CRT TV always have the TV button's, power switch remote sensor and indicating LED's on the main board but not in a separate board ( usually the front side of the board ).
Screen pot is too low, that is the reason the bad picture at the end, you didn' t calibrated it, screen pot first , then focus , (with bright, color, and contrast in the middle), adj. Screen until barely see the raster bright (do it in AV INPUT SELECTED with no input), after screen , change to any channel with no transmission, and adjust the focus (you must adjust focus seeing the center of the screen).
Классика жанра. Босоногий китаец или вьетнамец гуляет по улице и находит очень грязный и абсолютно комплектный аппарат. Моет чистит коасит. И на плате обязательно должен отвалиться кондер. Особенно прикалывает работа с тестером. Шлак.
I’ve had a shock off these before. It ain’t good I can tell you. It literally made my arm throw the screwdriver. After my arm felt like I had done weight lifting for ten minutes
Никакой это не SONY. Кинескоп пузатый. В 90х годах Сони выпускала тв только в черных корпусах. И с 1976 Сони запатентовала кинескоп с плоской вертикалью, это был TRINITRON.
Funny how the "sony trinitron" doesnt have a trinitron tube, and the CRT changes magically from being necked to a seemingly brand new crt halfway through the video with no context. TV is way to new to be from 1990. Also the thumbnail is just a joke, a circle with an arrow pointing to the anode wire... wha what for what purpose is that for. Tripple thumbs down.
Everything wrong with this video: 0:01 Great, we start off like usual, a regular chad taking a walk in the middle of nowhere 0:39 Alright I just noticed he's wearing sandals while walking through there, awesome 0:51 CRT is necked, so I would instantly walk away, plus the case is too far gone 1:25 Yeah go ahead and keep snapping the plastic 😂 1:42 See that dark spot on the screen? that means the CRT went to air and is toast 1:54 I'm surprised that screw is still holding it together 2:11 Mmm, crusty... 2:41 Not discharging the tube? But hey, it's an old set that was probably abandoned for years 2:50 Just unplug everything without taking note of where each wire goes 3:31 I hope you replace that speaker. The foam is broken 3:40 There always has to be some annoying background noise, doesn't it? 4:02 Jezz this high speed video is making me feel dizzy 4:43 That's disgusting 4:52 Gloves? Nah, just grab that shit with your bare hands 5:25 Jesus, I really hove you put on some gl... 5:38 Tape holding it together. Classic. Oh and some random screws too! 5:59 Goodbye original paint 6:46 Didn't even clean the floor before starting 6:59 Why don't you use a brush? Water itself won't do a good job 7:18 Looks like he already got a new tube, no mention of it though 7:19 Also, it's not advisable to rinse it with water just like that 7:50 Another sign that this TV was too broken to repair 7:58 Why clean it? It's unsalvageable 8:03 Good luck getting all that powder soap off the board 8:11 *Bends the cover when removing it 8:19 Again with cleaning parts that should be thrown away 8:28 That ought to be good for the conductive paint 8:38 It still looks like you took it out of a dumpster, sorry :( 8:43 Unnecessary product unboxing 9:36 And another unboxing 9:54 Is that a screw hole? Superglue ain't gonna cut it 10:05 Nice refilling, though you didn't clean off the excess 10:18 At this rate you're going to need a lot more super glue 10:56 This restoration is just too comical 11:36 That's way too much super glue 11:53 Good, sand it. We are looking for premium results here 12:07 Something tells me you won't fill those two holes 12:29 Nice way of supporting the piece 12:31 *Gets showered in overspray 12:44 Now comes the Ridiculous Repairs section! 13:22 I still can't believe he's doing this 14:02 Look at all that discoloration. This set was probably on its last legs 14:26 The tip on that soldering iron. It's just too much 🤣 15:04 I guess the previous super glue stick already ran out. Didn't buy a new one though 15:13 The ground wire on the multimeter is connected to the wrong port. Apparently it works anyway. 15:36 Replace that fuse 15:48 NOOOOO!!! 16:00 That cap is not happy 16:33 Switching transistor not looking too happy either. Something catastrophical happened to this poor TV. 16:40 So he didn't replace the fuse, yet bought a new transitor. Budget doesn't seem to be a problem here... 17:08 New cap too? Ok 17:53 That's another transistor, and what's the best way to test it? Of course! With the continuity check! 😂 18:10 Blown too 18:14 I hope that's thermal paste and not just white paint 18:50 No clue as to what he's testing, like always 19:06 There's still some junk on those buttons, but whatever 19:32 Is that new speaker? Looks like it 20:07 Sweet, merciful Jesus. I thought you painted it silver. 20:33 Throw this thing in the garbage, end its suffering 20:54 Is he really going to replace that coil? Damm 21:21 At this point he spent more money on parts than what the TV is actually worth. 22:06 That wire is still unplugged 22:10 You can see that premium paint job up close 22:23 The end result looks terrible. Should've just cleaned it and left it as is 22:39 What's up with those two holes on top of the rca sockets? Did you poke your soldering iron through? 22:59 The colors look way too saturated, and the image is too dark. This picture tube is junk 23:12 The alignment is off too. Wow If you got this far reading, congratulations! Hope you liked my detailed analysis.
honestly there is no need to write down connections of a CRT, this are simple consumer tvs and have very little connectors and most models are basically the same
This device is not a Sony TV. People laughed. This is a Chinese public TV collection. Manufacture 2010 and over. And the screen is broken. These tricks pass to the average person, but the technician does not
Eu vi aqui no título da TV era um fio vermelho que tava faltando na TV você consertar Olha aí no título que aparece era um fio vermelho que tava faltando você consertar
I see quite a few people screaming fake because the CRT tube is different after like 7:18, but why does that mean they're faking it? If you'd wanna restore a TV and you'd see the tube was broken, surely it'd be okay to swap the tube right? They never claimed to repair the original tube, they only restored the tv. Wanting them to keep the old tube is like saying you need to perform a lung transplant on someone whose lungs have completely failed, but you DO need his original lungs to stay in there...
When someones car window breaks in an accident I demand and expect them to take all the pieces of glass, melt them back down into a molten form, and perfectly reshape it using only those authentic, original pieces. Otherwise it isn't repaired, obviously. Totally fake and insane how all these auto-body shops get away with 'repairs' and 'restorations' when they're just using other non-original parts. How shameful. (I hope the sarcasm was heavy enough)
Я подумал что видео будет по разборке его. А тут такое. Как-то я советский телевизор весна 306 восстанавливал ,но он хотя бы цел был. А этот трупик зачем делать надо было?
楽しく作ってみれば不可能なものはない大変素晴らしいことでしょう！👍👏👏👏👏👏
да молодец тайландец талант от бога действительно человек хорошо разбирается по телемастерству респект ему
This is not a Sony TV, Sony TV does not use Bsc 25-1010A playback and IC 76810
Kemungkinan itu barang KW alias gak memenuhi standar Sony Jepang.
Nor does it have a conventional colour crt. The Trinitron is Sony’s colour crt.
@@justderpy3043 Could be
Fake Sony! Where's the Trinitron tube?? Bizarre. Also it's fugly. Definitely not a Sony design!
Yes true
Muito capricho,parabéns.Esse chassis está se parecendo muito com o chassis da Philco Britânia
Этот телевизор до сих пор смотрится по футуристический. Особенно после реставрации.
Gostei muito do seu trabalho incrível ademiro ficou como nova és um artista parabéns
This is a China CRT TV kit, LA 78040, 2003 sound IC etc. A genuine branded CRT TV always have the TV button's, power switch remote sensor and indicating LED's on the main board but not in a separate board ( usually the front side of the board ).
Отправьте этого парня на МКС, он там все починит!!!
Bypassing the fuse is an incredibly dangerous thing to do. What BS is this? I love how the CRT changed halfway through the video.
IKR videos like this make me cringe.
i think he got a new tube.
No, he literally bypasses it in the video with some solder at 15:49. Please don't do this!
Muita gente jogando tvs de tubo no lixo e esse cara restaurando uma só os pedaços 👏
Very nice restoration.thank you!
Has anyone also noticed that he showed a different CRT at 7:18? The one in the beginning was broken and now its perfect all of a sudden :\
U fool that tv body was fully broken so changed it
2 канал 3 канал 4 канал 5 канал 6 канал 7 канал
oh yes, I sure saw that first thing, he even had to pick out the broken pieces from the broken neck of the crt from the socket
Да
@@microtech47malayalam53 он вас не обзывал и вы не обзываитесь
Great work
Continua sempre que Deus te ilumine 🙌
Amém
🤣🤣🤣🤣
Muito bom parabéns
I think he did a good job on restoring a TV busted up that bad !
Screen pot is too low, that is the reason the bad picture at the end, you didn' t calibrated it, screen pot first , then focus , (with bright, color, and contrast in the middle), adj. Screen until barely see the raster bright (do it in AV INPUT SELECTED with no input), after screen , change to any channel with no transmission, and adjust the focus (you must adjust focus seeing the center of the screen).
Funny how he gnaws and scratches away at the components with his soldiering iron., Ps see the loose connector as he fitted the rear cover ..
parabéns!!!!
Muito bom
God bless u 😀 u saved it!!!
Yes, thanks
can u help me to become a perfect, pro restorer like you? pls??😁😁😁
That Cina mechine not original
Guy: reatores TV
omments section: Ah yes, a new God
@@bungmokotehnik7757 who cares?
Good jop you the best congratulations
WoooAhhh very nice
??? never seen an sony telivison without an triniton tube ....
China Circuit board....not SONY.
That surely is not a TV manufactured in 1990.. More like 2000...
Apapun itu,,, mantap
Dont forget to do purity and static/dynamic convergence.
Giá trị của cuộc sống là ở video này ❤
Nice video
Классика жанра. Босоногий китаец или вьетнамец гуляет по улице и находит очень грязный и абсолютно комплектный аппарат. Моет чистит коасит. И на плате обязательно должен отвалиться кондер. Особенно прикалывает работа с тестером.
Шлак.
Nice arcing flyback, beats me how he didn't have a nasty shock with all the high voltage... I think it a Lg?
I’ve had a shock off these before. It ain’t good I can tell you. It literally made my arm throw the screwdriver. After my arm felt like I had done weight lifting for ten minutes
こういう動画大好き
Bored smashing: in reverse
Great work nice
Bem tudo TV televisão Scanlines linda 🥰🥰
Well done 👏👏👏👍🏻
20 ângulos de câmera para achar a porta da tv
Acho interessante este trabalho, mas me chama atenção é o lixo jogado em lugar inadequado.
🤣🤣🤣
Amazing
Никакой это не SONY. Кинескоп пузатый. В 90х годах Сони выпускала тв только в черных корпусах. И с 1976 Сони запатентовала кинескоп с плоской вертикалью, это был TRINITRON.
Funny how the "sony trinitron" doesnt have a trinitron tube, and the CRT changes magically from being necked to a seemingly brand new crt halfway through the video with no context. TV is way to new to be from 1990. Also the thumbnail is just a joke, a circle with an arrow pointing to the anode wire... wha what for what purpose is that for. Tripple thumbs down.
he got a new tube, im tired of people on the internet being so dumb.
These videos are just a money grab
He must have glued the picture tube back together with super glue and baking soda, and then pulled a vacuum inside it with his mouth.
funciona claro! com outra placa e outro tubo funciona mesmo
আবার এই টেলিভিশনগুলো ফিরে আসুক এই টিভির ছবি দেখতে অনেক ভালো
Great job on restoring tv
Super bro
Very very very good awsome
Cambio el tubo del televisor, es muy evidente que cambio la mayoría de los componentes. Eh sido timado.
Jajaja sii, además que nunca fue Sony
Aí eu der valor
Everything wrong with this video:
0:01 Great, we start off like usual, a regular chad taking a walk in the middle of nowhere
0:39 Alright I just noticed he's wearing sandals while walking through there, awesome
0:51 CRT is necked, so I would instantly walk away, plus the case is too far gone
1:25 Yeah go ahead and keep snapping the plastic 😂
1:42 See that dark spot on the screen? that means the CRT went to air and is toast
1:54 I'm surprised that screw is still holding it together
2:11 Mmm, crusty...
2:41 Not discharging the tube? But hey, it's an old set that was probably abandoned for years
2:50 Just unplug everything without taking note of where each wire goes
3:31 I hope you replace that speaker. The foam is broken
3:40 There always has to be some annoying background noise, doesn't it?
4:02 Jezz this high speed video is making me feel dizzy
4:43 That's disgusting
4:52 Gloves? Nah, just grab that shit with your bare hands
5:25 Jesus, I really hove you put on some gl...
5:38 Tape holding it together. Classic. Oh and some random screws too!
5:59 Goodbye original paint
6:46 Didn't even clean the floor before starting
6:59 Why don't you use a brush? Water itself won't do a good job
7:18 Looks like he already got a new tube, no mention of it though
7:19 Also, it's not advisable to rinse it with water just like that
7:50 Another sign that this TV was too broken to repair
7:58 Why clean it? It's unsalvageable
8:03 Good luck getting all that powder soap off the board
8:11 *Bends the cover when removing it
8:19 Again with cleaning parts that should be thrown away
8:28 That ought to be good for the conductive paint
8:38 It still looks like you took it out of a dumpster, sorry :(
8:43 Unnecessary product unboxing
9:36 And another unboxing
9:54 Is that a screw hole? Superglue ain't gonna cut it
10:05 Nice refilling, though you didn't clean off the excess
10:18 At this rate you're going to need a lot more super glue
10:56 This restoration is just too comical
11:36 That's way too much super glue
11:53 Good, sand it. We are looking for premium results here
12:07 Something tells me you won't fill those two holes
12:29 Nice way of supporting the piece
12:31 *Gets showered in overspray
12:44 Now comes the Ridiculous Repairs section!
13:22 I still can't believe he's doing this
14:02 Look at all that discoloration. This set was probably on its last legs
14:26 The tip on that soldering iron. It's just too much 🤣
15:04 I guess the previous super glue stick already ran out. Didn't buy a new one though
15:13 The ground wire on the multimeter is connected to the wrong port. Apparently it works anyway.
15:36 Replace that fuse
15:48 NOOOOO!!!
16:00 That cap is not happy
16:33 Switching transistor not looking too happy either. Something catastrophical happened to this poor TV.
16:40 So he didn't replace the fuse, yet bought a new transitor. Budget doesn't seem to be a problem here...
17:08 New cap too? Ok
17:53 That's another transistor, and what's the best way to test it? Of course! With the continuity check! 😂
18:10 Blown too
18:14 I hope that's thermal paste and not just white paint
18:50 No clue as to what he's testing, like always
19:06 There's still some junk on those buttons, but whatever
19:32 Is that new speaker? Looks like it
20:07 Sweet, merciful Jesus. I thought you painted it silver.
20:33 Throw this thing in the garbage, end its suffering
20:54 Is he really going to replace that coil? Damm
21:21 At this point he spent more money on parts than what the TV is actually worth.
22:06 That wire is still unplugged
22:10 You can see that premium paint job up close
22:23 The end result looks terrible. Should've just cleaned it and left it as is
22:39 What's up with those two holes on top of the rca sockets? Did you poke your soldering iron through?
22:59 The colors look way too saturated, and the image is too dark. This picture tube is junk
23:12 The alignment is off too. Wow
If you got this far reading, congratulations! Hope you liked my detailed analysis.
wow good observations good to know others look for the details and problems with these videos good job
honestly there is no need to write down connections of a CRT, this are simple consumer tvs and have very little connectors and most models are basically the same
Top sony e a melhor tv pra retro games
China. Kit. No. Sony. Ful
very very guod.👌👌👌👌👍👍
This device is not a Sony TV. People laughed. This is a Chinese public TV collection. Manufacture 2010 and over. And the screen is broken. These tricks pass to the average person, but the technician does not
Клей дороже телевизора стоит
Wow great work
Thank you!
Fake work, the g2 is magically good???
@@antoniobarra8194 อยากได้เบอร์จังเลย
Это не sony, китайский телевизор шасси 3y01,еще кинескоп сломанный
Корпус склеить на суперклее
Super good
Infelizmente essas TVs de tubo não tem valor
Aleluia tv televisão saber ótimo televisão tem vida perfeito até RGB Scanlines linda
🤣🤣🤣
Right, like a cleaning with soapy water fixes a necked CRT?
O cara é um gênio
🤣🤣🤣
23:23 либо я что то пропустил либо пульт умеет телепортироватся к своему телевизору
Eu vi aqui no título da TV era um fio vermelho que tava faltando na TV você consertar Olha aí no título que aparece era um fio vermelho que tava faltando você consertar
Você sempre tem que olhar o título modo saber se você esqueceu de alguma parte não é assim você sempre tem que olhar o título do canal
E a parte da frente é quebrada toda aí pertinho do som que tem na TV parte da frente também é quebrada
What's the green power used with the super glue?
Falei no título da TV era um fio vermelho que tá faltando consertar
Mas é só uma rachadura perto do som não acha a dor não rachadona
aku paling hobi mbetulin tv yg sudah jadi rongsok he he
I see quite a few people screaming fake because the CRT tube is different after like 7:18, but why does that mean they're faking it? If you'd wanna restore a TV and you'd see the tube was broken, surely it'd be okay to swap the tube right? They never claimed to repair the original tube, they only restored the tv. Wanting them to keep the old tube is like saying you need to perform a lung transplant on someone whose lungs have completely failed, but you DO need his original lungs to stay in there...
When someones car window breaks in an accident I demand and expect them to take all the pieces of glass, melt them back down into a molten form, and perfectly reshape it using only those authentic, original pieces. Otherwise it isn't repaired, obviously. Totally fake and insane how all these auto-body shops get away with 'repairs' and 'restorations' when they're just using other non-original parts. How shameful. (I hope the sarcasm was heavy enough)
good job
Eu gostaria de ter a tua inteligência
Very good
Good work
That TV isn’t a Sony. It’s curved in both directions. A sony tube is only curved along the horizontal axis
Fantastic
Я подумал что видео будет по разборке его. А тут такое. Как-то я советский телевизор весна 306 восстанавливал ,но он хотя бы цел был. А этот трупик зачем делать надо было?
За СССР
Very god
Guau que bien la acomodastes
I don't think he understands what a fuse is for... Sigh, don't do this folks.
Perfect
CRT was broken
Asa lucrez sí EU super.super
Nice 👍🏻👍🏻 🇮🇳 || Kuki 05|01|2022
É uma TV com a parte de frente branca e a parte de trás toda quebrada e é preta
Quem jogou fora nao imaginava que els ia vou voutar a vida
А КАК ВЫ ПОЧИНИЛИ ЗАДНИЮ ЧАСТЬ КОРПУСА ВЕДЬ ТАМ НЕБЫЛО ПОЛОВИНО ПЛАСТИКА ЧЕМ ВЫ ЕЕ ЗАМЕНИЛИ
Boa boa professor🤖😋
7:18 магическое появление нового кинескопа. у старого была разбита трубка сзади и было чёрное пятно по середине экрана.
баньте этих псевдореставраторов! Весь ютуб загадили
if it were me i would take the pieces and make a sound amplifier - wouldn’t you be able to play Aqua on the pieces and fake (I’m Brazilian) algum BR?
CON AGUA...
?...... DEJA
NO MIENTAS AL PUEBLO
Cuando ya la está cerrando poniendo la tapa trasera se ve un conector sin conectar.. pero igual execelente trabajo
Not SONY Tv, but china tv component.
Woo 👍🏼👏🏼
Hd quality super bro
Что за модель телевизора ?
Looks like grandpa's axe to me. New handle and new head..
Super
Lol ! Who would even bother to restore something like this ? And washing all of those components !