Thanks for the video. I'm using a LCI Idrive knob in a pre LCI E60. How do I change the work order so that it recognized using Pro tools coding? Can you do a videos on something like this?
Hey thanks for the vid, you did manage to answer a few questions I had partially. The most important thing that I wanted this app for (deciding between this and a scanner that does the same but cost a pinch more) was my adaptive headlight, lci tail lights and rear wiper. I wanted to troubleshoot the fault so I can fix it and code the tail light. Now I’m guessing that the same process goes for the tail lights as was the license plate, my question is by removing the cold and warm check will I no longer be notified should they go out. Also since you are by now more experienced with the app (no need for a video) would you be able to tell me if it’s possible to specifically or narrow down the problem with my adaptive headlight and rear wiper. Thanks again for the vid, it helped make my decision to purchase the app, just need to check if the tablet I bought is compatible
Than you for a good walkthrough. Very informative. Can you get it to read the Transmission Temp on your E90? My ProTool is not reading my E92 with a GM box temp.
Missan Eido hi, you’re welcome and thank you for viewing. I am also haven’t trouble reading my trans temp on my e90 with the ZF transmission. Im not sure why it doesn’t read the temperature.
@@DesertBuilds760 Thank you for the quick reply. By the way, have you had any luck contacting the customer service? I attempted several times with no Joy.
Hi mate great video. My question is if I download the app onto my Samsung tablet can I use the app on my phone as well or would i have to pay for the app twice. Cheers pal. Joe
Hey! Thank you so much for uploading this video, Its very helpful! I ve got an issue with my car, i had to energize my car because accidentally closed the trunk with the negative battery terminal disconnected. 2 thing sort of reset. The windows and the self canceling for the turn signal. The window thing i was able to reset it manually but the self canceling turn signal couldnt, i tried manually and i also tried to adjust the steering angle sensor but no luck. Everything else works great in the car. People suggest me to reset the FRM using protool which i am going to buy. I am just waiting for the cable to arrive. On your video when u enter to the coding menu of FRM it says ECU, is that what resets the FRM? And if i reset the FRM and I am tuned i shouldn't have issues with the tune of my car? I believe its something independent and probably this is a dumb question lol. My last question, is there a function that relates to the self canceling?
Chris S.V sorry for the very late reply. I would save a backup of your frm module first before doing anything. Afterwards, I would simply reset any errors in the frm first to see if that solves your issues. If not, you can default code the frm back to factory settings. If running jb4, set to map 0 for the tune. An OTS tune, I’m not sure how that would work. I have a BEF OTS e85 flash and have had no issues using the protools app with the BEF. Good luck and try it at your own risk. Thanks.
Hi. Great video. I have a problem with my SGM/SIM. I’ve ordered a replacement (used one) but need to know if this will let me Change the VIN on the module and reset the timers? Cheers.
Hey, yes, you should be able to adjust the vin and reset the timers on it with the app. Thanks for watching. Could you please like and subscribe. Thank you.
Thank you for the very informative video! Do you know if I can code in a backup camera with it? I have an E92 with CIC iDrive version and front/rear PDC, but no OE camera, I wanted to add an aftermarket unit on the trunk handle.
You’re welcome. Please like and subscribe if you enjoyed the video. As for your question, I believe they sell Back up cameras that are direct plug and play and require no coding.
@@DesertBuilds760 thanks, I know that, but you also need a new after market head unit or a MMI box to add a camera without coding. I take it that the Protools app cannot code a camera, then. Between this limitation and the fact that it doesn’t support iOS, I believe that Carly might be a better option for me.
@@corradotox you can use protools to add options to your vehicle order. I am not familiar with camera installation. I do not the vehicle order can be changed and options can be added or removed. Hope this helps.
@@corradotox I know Protools can do just about what you could do if you were using a laptop to code. Sorry that’s all the info I have for the camera. Good luck and I hope you find a solution.
I have a 2015 bmw 535d, it throw me the code exhaust system malfunction and then the 1000 miles count down, Carly said its bad DEF, I drained and replaced the DEF but the won't restart count down is still there, can it be reset.
When coding a new jbe module is all you have to do is reset the vin… I’m pretty sure mines cooked my wipers turn off but won’t turn off I have no door locks no dtc control and my fuel gauge doesn’t read
Think I can use PT to diagnose a no-op windshield washer motor? If I can see through tool if it detects it being turned on, then I can suspect the pump/wiring and go ahead and tear into the passenger wheel well?
Nice! I need to code out my AHL. I am having an issue though I purchased aftermarket headlights that aren't xenon and my High beam switch works but doesn't turn my high beams on if I flick it the wrong way they come on. Can I fix this with protool?
Hi, thanks for the comment. Subscribe if you could please! In the FRM module under safety, there are 2 AHL errors that must be disabled. Scroll down a bit further and you will see an option that says “bi-xenons installed” you must disable that option for the high beams to work properly.
Sweet video!! Btw, i got a used FRM for my e93 335is, and wanted to ask if it is possible for the Protool to automatically recognize my car and how the original OEM settings should be? Im about to get a tablet to acquire Protool. Thanks
What do you mean oem settings? Protools should recognize you’re car once the app is launched. It may ask you to enter your chassis code, which would be e89 or generation 2.
That’s awesome! Would it restore the headlights to come up to it’s designated height, radio that wont play, usb port that wont charge, etc, etc? Any help would be appreciated brother
@@stealthninja5398 I have not seen anything in the app about leveling headlights. I believe that’s based on your level sensor and your actual headlight. As for the rest, it will show you any errors in those places you mentioned.
hey bro, can you do a video on coding a CIC unit? Im trying to figure out the coding from CCC to CIC. Changing vin on CIC unit and enabling navigation.
I have a mini cooper with FRM issue. I have a diagnostic tool car will no longer read OBD2 will this app and hardware read the obd2. Since my diagnosis tool can no longer read it.
It’s possible it may still read it. You can download the app for free and see if it connects to your car. You won’t be able to do anything if you haven’t purchased the licenses, but it will connect. Another issue may be a blown obd2 fuse.
Just got my cable and otg in mail, have a r57 that tells me terminal 15 is missing..... I never removed any relays, and have only recovered things to match the Vin and replaced frm2. Where is terminal 15?
why does my protools take literally 5 mins to get to the main menu? is this normal? It's really frustrating to use when you have to wait so long for it to go through all the parameters and checks. What am I doing wrong and is there a setting once you are on the home screen to change this? I tried to look but found nothing. thanks for your help.
What cable are you using? And what tablet/phone? My tablet was the cheapest I could find. If I start the tablet and hook up right away, it is very slow. Here’s what I do, start the tablet, let it boot up for 5 min or so and then connect. I also use the bimmergeeks cable which is fast. Make sure your tablet is updated and the app is also updated.
Just bought the cables and downloaded the app on a Amazon fire tablet older version. Still yet to purchase the license but will protool code the color of the car on the display from standard grey to the color of the vehicle?
@@nour3058 you need to check the codes. If the app is not connecting, disconnect and try again with the ignition on and engine off. It will show MRS or SRS under safety. If not showing up, check srs related fuses. If still not showing up, possible internal fault of the srs module.
I had my windshield replaced and am having issues with the rain sensor. Do you know how to re-code after having the windshield replaced for the rain sensor using this app?
Hi, I have not yet seen a category labeled with anything regarding resetting the rain sensor. Maybe try to contact the company who installed it and so if they can re install it.
Ha have a question for you here would you know how to code a new TMS mod for the adaptive Headlight for a 2014 BMW 528I Base I do have the program with a Master license
@@davetanchak252 I have added a new video showing how it is done on an e91. The process is the same for your car however things may be named differently.
Great video! I got an idea of how to code a few things. I was wondering if you have maybe an IG page where I can ask you some detailed questions of a headlight build im trying to accomplish…let me know if that’s possible. Thank you
Great video bro, do you have to download the app then purchase the license from the website, how do you get the license over to the app ? , Is customer service hard to get in contact with somebody?
Thank you. Yes you have to download the app then inside the app, there are the license purchases. Customer service is best to access through their Facebook page. Bimmergeeks protoool is the name of the Facebook group.
Restart the app/your tablet and disconnect the OBD cable and try again. Sometimes I get that issue. If the issue continues, there may be a problem with the ECU not allowing connection.
I was messing around with this app yesterday, what do I go on there for low beams briteness , at night people flash me thinking high beams r on but there not on high
You can lower the brightness of the low beams by adjusting the voltage being sent to them and lower it. In the frm section, under functions, there will be an options to adjust voltages. However, do you have aftermarket headlights? I haven’t heard of the stock low beams blinding oncoming traffic.
@@DesertBuilds760 my e90 is equipped with the headlight washers/sprayers that pop out the front bumper cover when the windshield wipers are turned on/used
Anyone know where to find the airbag code and seatbelt in the ProTool or whatodule that code is stored in? Looking to code both those out on my racecar or completely remove the modules from existence since the modules have been removed. Thanks
I have e90 i thing low battery. This morning left head light not working after battery change can i reset frm module or need replace can you please help me
Hamyum, hi I have a 535 2009 E60 BMW I have a issue with my comfort access, I pull a fuse last month losing my ability to use my comfort access can anyone help me fix this. I have the master license for ProTools
So My 07 328xi steering wheel got locked while I was diagnosing a low battery/ alternator problem, got a new battery and alt in it now and as soon as I plug the battery a red steering lock icon shows up . I’m wondering if this tool will still work w out being able to push to ignition “ ON “?
@@jbr_garage9028 the steering wheel tried locking so many times while the battery was low and it couldn’t lock because it didn’t have enough power to engage the lock. It now thinks there is a fault in the system. You need to reset the elv counter. This will clear it up.
@@jbr_garage9028 yes, it will still work and connect even if the ignition is not able to turn on. I have reset a few wheel locks with the app. I think you need the diagnostic license for that.
Hey thanks for the vid, you did manage to answer a few questions I had partially. The most important thing that I wanted this app for (deciding between this and a scanner that does the same but cost a pinch more) was my adaptive headlight, lci tail lights and rear wiper. I wanted to troubleshoot the fault so I can fix it and code the tail light. Now I’m guessing that the same process goes for the tail lights as was the license plate, my question is by removing the cold and warm check will I no longer be notified should they go out. Also since you are by now more experienced with the app (no need for a video) would you be able to tell me if it’s possible to specifically or narrow down the problem with my adaptive headlight and rear wiper. Thanks again for the vid, it helped make my decision to purchase the app, just need to check if the tablet I bought is compatible
Hi I’m glad the video helped. Yes, once you doable cold and warm checks, you will no longer be notified if the bulb goes bad. As far as headlight and wiper, the app will scan and read if there is an error, but it won’t tell you exactly what it is. It may say adaptive error only and you have to figure out what’s wrong with it.
Great review just got ProTool today and this video help me configure everything I need! Thank you!
Very helpful. Thanks, much appreciated.
Great video. Please provide links for cables, tablet, adapters, Pro Tool app, everything! etc......thank you.
Adrian Jones I will add them to the description tomorrow, thank you for viewing.
I found a variable intake function on and off. Wondering if that's just a test function. Also, you should do a DSC and power class coding video!
Thanks for the video. I'm using a LCI Idrive knob in a pre LCI E60. How do I change the work order so that it recognized using Pro tools coding? Can you do a videos on something like this?
Try under the CAS VO and check if you can change options between the 2 knobs.
I have used lci knobs in pre lci E90 with no issues.
Hey thanks for the vid, you did manage to answer a few questions I had partially. The most important thing that I wanted this app for (deciding between this and a scanner that does the same but cost a pinch more) was my adaptive headlight, lci tail lights and rear wiper. I wanted to troubleshoot the fault so I can fix it and code the tail light. Now I’m guessing that the same process goes for the tail lights as was the license plate, my question is by removing the cold and warm check will I no longer be notified should they go out. Also since you are by now more experienced with the app (no need for a video) would you be able to tell me if it’s possible to specifically or narrow down the problem with my adaptive headlight and rear wiper. Thanks again for the vid, it helped make my decision to purchase the app, just need to check if the tablet I bought is compatible
Does Protool have the headlights animation?
2007 bmw x5 4.8i
Where do I reset the oil wear for the transfer case fluid change?
Code is a 54c6
Thank you for your help 🙏
I believe you need to reset transfer case adaptions to clear that error.
Than you for a good walkthrough. Very informative. Can you get it to read the Transmission Temp on your E90? My ProTool is not reading my E92 with a GM box temp.
Missan Eido hi, you’re welcome and thank you for viewing. I am also haven’t trouble reading my trans temp on my e90 with the ZF transmission. Im not sure why it doesn’t read the temperature.
@@DesertBuilds760 Thank you for the quick reply. By the way, have you had any luck contacting the customer service? I attempted several times with no Joy.
Missan Eido no worries! I will try to contact them tomorrow and see why our trans temp is not popping up.
@@DesertBuilds760 This is kind of you, thank you.
How to fold mirrors with the key fob? I have BMW F15. I can do that by holding the lock button. But is there a way to make them fold with one touch.
Yes, there should be values under the mirror fold via fob option. Select value 0 seconds.
Did you used the diagnostic or coding license?
Hi mate great video. My question is if I download the app onto my Samsung tablet can I use the app on my phone as well or would i have to pay for the app twice. Cheers pal. Joe
Hi, thank you. You can use the app on any device that is linked to your google play account.
Hey! Thank you so much for uploading this video, Its very helpful!
I ve got an issue with my car, i had to energize my car because accidentally closed the trunk with the negative battery terminal disconnected.
2 thing sort of reset. The windows and the self canceling for the turn signal. The window thing i was able to reset it manually but the self canceling turn signal couldnt, i tried manually and i also tried to adjust the steering angle sensor but no luck. Everything else works great in the car.
People suggest me to reset the FRM using protool which i am going to buy. I am just waiting for the cable to arrive.
On your video when u enter to the coding menu of FRM it says ECU, is that what resets the FRM? And if i reset the FRM and I am tuned i shouldn't have issues with the tune of my car? I believe its something independent and probably this is a dumb question lol.
My last question, is there a function that relates to the self canceling?
Chris S.V sorry for the very late reply. I would save a backup of your frm module first before doing anything. Afterwards, I would simply reset any errors in the frm first to see if that solves your issues. If not, you can default code the frm back to factory settings. If running jb4, set to map 0 for the tune. An OTS tune, I’m not sure how that would work. I have a BEF OTS e85 flash and have had no issues using the protools app with the BEF. Good luck and try it at your own risk. Thanks.
hi can you do a video on coding cruise control on an e90 please i am strugglling i am trying to understand how to code things.thanks
Hi. Great video.
I have a problem with my SGM/SIM. I’ve ordered a replacement (used one) but need to know if this will let me Change the VIN on the module and reset the timers?
Cheers.
Sorry, should have said it’s a 2005 E60 535d.
Thanks.
Hey, yes, you should be able to adjust the vin and reset the timers on it with the app. Thanks for watching. Could you please like and subscribe.
Thank you.
Thank you for the very informative video! Do you know if I can code in a backup camera with it? I have an E92 with CIC iDrive version and front/rear PDC, but no OE camera, I wanted to add an aftermarket unit on the trunk handle.
You’re welcome. Please like and subscribe if you enjoyed the video.
As for your question, I believe they sell Back up cameras that are direct plug and play and require no coding.
@@DesertBuilds760 thanks, I know that, but you also need a new after market head unit or a MMI box to add a camera without coding. I take it that the Protools app cannot code a camera, then. Between this limitation and the fact that it doesn’t support iOS, I believe that Carly might be a better option for me.
@@corradotox you can use protools to add options to your vehicle order. I am not familiar with camera installation. I do not the vehicle order can be changed and options can be added or removed. Hope this helps.
@@corradotox I know Protools can do just about what you could do if you were using a laptop to code. Sorry that’s all the info I have for the camera. Good luck and I hope you find a solution.
What about how to code in adaptive headlight malfunction to use it
I have a 2015 bmw 535d, it throw me the code exhaust system malfunction and then the 1000 miles count down, Carly said its bad DEF, I drained and replaced the DEF but the won't restart count down is still there, can it be reset.
When coding a new jbe module is all you have to do is reset the vin… I’m pretty sure mines cooked my wipers turn off but won’t turn off I have no door locks no dtc control and my fuel gauge doesn’t read
@@burnttoast804 yes. You just need to default code the new jbbe and it will change the vin on it.
Think I can use PT to diagnose a no-op windshield washer motor? If I can see through tool if it detects it being turned on, then I can suspect the pump/wiring and go ahead and tear into the passenger wheel well?
I have not seen anything on the app regarding the washer pumps.
Nice! I need to code out my AHL. I am having an issue though I purchased aftermarket headlights that aren't xenon and my High beam switch works but doesn't turn my high beams on if I flick it the wrong way they come on. Can I fix this with protool?
Hi, thanks for the comment. Subscribe if you could please! In the FRM module under safety, there are 2 AHL errors that must be disabled. Scroll down a bit further and you will see an option that says “bi-xenons installed” you must disable that option for the high beams to work properly.
Did it work for you?
@@DesertBuilds760 Yes sir. I subscribed aswell.
Would this work for when u install Lci head lights on a pre lci? Bc high beams also do the same and my turn signals blink faster than usual
I also have lci tail lights that flicker at idle sometimes
Sweet video!! Btw, i got a used FRM for my e93 335is, and wanted to ask if it is possible for the Protool to automatically recognize my car and how the original OEM settings should be? Im about to get a tablet to acquire Protool. Thanks
What do you mean oem settings?
Protools should recognize you’re car once the app is launched. It may ask you to enter your chassis code, which would be e89 or generation 2.
That’s awesome! Would it restore the headlights to come up to it’s designated height, radio that wont play, usb port that wont charge, etc, etc? Any help would be appreciated brother
@@stealthninja5398 I have not seen anything in the app about leveling headlights. I believe that’s based on your level sensor and your actual headlight. As for the rest, it will show you any errors in those places you mentioned.
Can you use this tool to adjust the DCT Drivelogic and "power" settings for a 2012 BMW e92 M3?
Haven’t been able to see any videos with a f chassis the menu is different from the e series
@@keithospencer I will try to make one.
How do I code out ELV? I changed steering columns with one without ELV
I have code 2DED can the Intelegent battery sensor be registered or it it just a normal swap part? thanks
Can you alight the dme and the cas ignition with the app
hey bro, can you do a video on coding a CIC unit? Im trying to figure out the coding from CCC to CIC. Changing vin on CIC unit and enabling navigation.
What do you need coding for? To default code to the car?
I have a mini cooper with FRM issue. I have a diagnostic tool car will no longer read OBD2 will this app and hardware read the obd2. Since my diagnosis tool can no longer read it.
It’s possible it may still read it. You can download the app for free and see if it connects to your car. You won’t be able to do anything if you haven’t purchased the licenses, but it will connect.
Another issue may be a blown obd2 fuse.
I did the lci tailights conversation on my 08 e90 can I code them with protool?
Yes you can
Great video. I purchased master license but I’m getting an error identifying vehicle type. I have a 2007 bmw 335i e93. Any tips?
If you are using kcan cable toggle the switch to middle or right position and try again.
westley carter when you open protools, make sure you have the right chassis selected. I believe e93 would fall under the e89 chassis.
Can the x drive delete be performed with the protool? I noticed you had the xdrive delete app on your tablet. Just wondering if protool does it all?
Hey, no, protools cannot do the x drive delete.
I have the xdelete app for another car that toggle the xi on and off.
@@DesertBuilds760 can you do a video on the X delete
@@michaelcondrey8681 I will check if Xdelete wants to partner up for a video.
Just got my cable and otg in mail, have a r57 that tells me terminal 15 is missing.....
I never removed any relays, and have only recovered things to match the Vin and replaced frm2.
Where is terminal 15?
Can you code rdc module for tpms my rdc is bad and have to replace but new one will need to be coded
2011 328i
Hi, yes you can.
why does my protools take literally 5 mins to get to the main menu? is this normal? It's really frustrating to use when you have to wait so long for it to go through all the parameters and checks. What am I doing wrong and is there a setting once you are on the home screen to change this? I tried to look but found nothing. thanks for your help.
What cable are you using? And what tablet/phone? My tablet was the cheapest I could find. If I start the tablet and hook up right away, it is very slow. Here’s what I do, start the tablet, let it boot up for 5 min or so and then connect. I also use the bimmergeeks cable which is fast. Make sure your tablet is updated and the app is also updated.
Just bought the cables and downloaded the app on a Amazon fire tablet older version. Still yet to purchase the license but will protool code the color of the car on the display from standard grey to the color of the vehicle?
No it will not.
Good day i would like to know how to switch on the fuel pump and engine fan on the e90
Under the engine section, you can click the control button and it’s gives you a list of things to control, fan and fuel pump are on there.
Video starts at 2:14
Good video bro
Can we use it to code F series new generation
I believe you can now.
Hey man thanks for the video quick question why for me it doesn’t show airbag or frm under safety? I have a 2010 bmw 335 and I have a airbag light
Was the car in an accident ?
@@DesertBuilds760 no but my passenger restraint system malfunction light is on and I got new sport seats and it’s still on
@@nour3058 you need to check the codes.
If the app is not connecting, disconnect and try again with the ignition on and engine off. It will show MRS or SRS under safety. If not showing up, check srs related fuses. If still not showing up, possible internal fault of the srs module.
I had my windshield replaced and am having issues with the rain sensor. Do you know how to re-code after having the windshield replaced for the rain sensor using this app?
Hi, I have not yet seen a category labeled with anything regarding resetting the rain sensor. Maybe try to contact the company who installed it and so if they can re install it.
The company that replaced the windshield*
Ha have a question for you here would you know how to code a new TMS mod for the adaptive Headlight for a 2014 BMW 528I Base I do have the program with a Master license
Go to frm module and click functions and click code headlight module left or right.
hello
please can this be use on BMW E46 ?
thank you
I believe it can. I am not 100% aure
How do you code out the daylight running lights and turn up the Angel eyes?
Do you still need help? I can make a specific video if needed. Thanks.
@@DesertBuilds760 yes please, I have tried but my menu looks different than yours. I have a 2006 E65.
Thanks
@@davetanchak252 I have added a new video showing how it is done on an e91. The process is the same for your car however things may be named differently.
Great video! I got an idea of how to code a few things. I was wondering if you have maybe an IG page where I can ask you some detailed questions of a headlight build im trying to accomplish…let me know if that’s possible. Thank you
@serff_
Great video bro, do you have to download the app then purchase the license from the website, how do you get the license over to the app ? , Is customer service hard to get in contact with somebody?
Thank you. Yes you have to download the app then inside the app, there are the license purchases.
Customer service is best to access through their Facebook page. Bimmergeeks protoool is the name of the Facebook group.
@@DesertBuilds760 ok thanks will do , keep up the great work
@@stevet8607 you log into the app with the email you used to purchase the license
@@mrpocklington thanks for the reply , got it to work 👍
Can this code BMW X6 injector?
my low battery voltage came on when I was coding the footwell module. Any fix for that?
Did the warning going away once you started the car? Your battery may be going out.
Hey protool gave me the this message (there was an error reading the coding data from this ecu) any help?
Restart the app/your tablet and disconnect the OBD cable and try again. Sometimes I get that issue. If the issue continues, there may be a problem with the ECU not allowing connection.
@@DesertBuilds760 thanks man
Can you cang the fuel level reserve threshold
Yes
I have a e65 7 series and have put in a newer ask unit I need to change thenvin but I have no radio cd function works fine just no radio
Hi, there should be an option to change vin or default code under the radio section.
Im getting a fault in my rollover module... its possible to get a used replacement and code it?
Yes it is
I was messing around with this app yesterday, what do I go on there for low beams briteness , at night people flash me thinking high beams r on but there not on high
You can lower the brightness of the low beams by adjusting the voltage being sent to them and lower it. In the frm section, under functions, there will be an options to adjust voltages. However, do you have aftermarket headlights? I haven’t heard of the stock low beams blinding oncoming traffic.
and where can i get it to buy
Disable Angel eye bulb check (for led use) and disable headlight washers?
Yes, for LED angel eyes, you can disable the cold and warm checks for angels eyes.
What do you mean headlight washers?
@@DesertBuilds760 my e90 is equipped with the headlight washers/sprayers that pop out the front bumper cover when the windshield wipers are turned on/used
@@bunnyforce9224 ok and you want to stop those from operating?
@@DesertBuilds760 Yes, i want to disable them
@@bunnyforce9224 in the JBBF/JBE module, there should be an option for headlight washers. You can try and disable that option.
can i use on my iphone or is it just for an android?
It’s currently only on android
Can i reset frm module 9cbb also left head light not working
You can reset frm module with the app, yes
How do you check fuel injectors n55 e70
It might give you a code for injectors but that’s about all.
What phone you running?
It is an rca tablet from Walmart. Cost me $50
Does this work on F models
Yes. It does.
@@DesertBuilds760 really
@@DesertBuilds760 thank you so much
@@DesertBuilds760 how about coding in
I need to replace my Ekp fuel pump module, can I do that with protool ?
Terence Brake I believe you can.
Anyone know where to find the airbag code and seatbelt in the ProTool or whatodule that code is stored in?
Looking to code both those out on my racecar or completely remove the modules from existence since the modules have been removed.
Thanks
It’s in the safety category under airbags and then it will be in the coding option.
I’m trying to code mines out did you have to unplug the yellow sensor under the seats ?
I figured it out. Was missing 1 setting.
@@Alex-md5rp the seatbelt needs to be electronically unplugged.
@@holeshot895is that simple to do and so unplug it and disable it ?
Is there an option for exhaust burble?
natnicebk no there is not
do you have cracked APK , i need license before i coding it
I have e90 i thing low battery. This morning left head light not working after battery change can i reset frm module or need replace can you please help me
You can reset the frm module with the app.
@@DesertBuilds760 also right turn bulb not working after app its ok ??
@@DesertBuilds760 thank you bro
@@dtechnic1469 I don’t understand. It is not working after you used the app?
@@DesertBuilds760 sorry i will ride after reset frm module thanx bro
Can you bleed waterpump through the app?
You can bleed the water pump without the app.
Hamyum, hi I have a 535 2009 E60 BMW I have a issue with my comfort access, I pull a fuse last month losing my ability to use my comfort access can anyone help me fix this. I have the master license for ProTools
Have you replaced the fuse?
What does values 00-FF mean
Where do you see that?
do you have a telegram channel
I do not, sorry.
Would this help me delete the steering wheel lock?
You can’t delete the steering wheel lock, but you can reset it with the app, if it’s giving you issues.
@@DesertBuilds760 thank you so much bro you came clutch i didnt know wat to do 🤦🏻♂️ i was gonna start dumpin money on it
So My 07 328xi steering wheel got locked while I was diagnosing a low battery/ alternator problem, got a new battery and alt in it now and as soon as I plug the battery a red steering lock icon shows up . I’m wondering if this tool will still work w out being able to push to ignition “ ON “?
@@jbr_garage9028 the steering wheel tried locking so many times while the battery was low and it couldn’t lock because it didn’t have enough power to engage the lock. It now thinks there is a fault in the system. You need to reset the elv counter. This will clear it up.
@@jbr_garage9028 yes, it will still work and connect even if the ignition is not able to turn on. I have reset a few wheel locks with the app. I think you need the diagnostic license for that.
you're the fucking man
Shitty, my cable from Amazon just came in🤦🏻♂️
It may still work. The one I had worked for about 2 weeks, or 4-5 uses and then it stopped working.
@@DesertBuilds760 been working so far🤞🏻
Hey thanks for the vid, you did manage to answer a few questions I had partially. The most important thing that I wanted this app for (deciding between this and a scanner that does the same but cost a pinch more) was my adaptive headlight, lci tail lights and rear wiper. I wanted to troubleshoot the fault so I can fix it and code the tail light. Now I’m guessing that the same process goes for the tail lights as was the license plate, my question is by removing the cold and warm check will I no longer be notified should they go out. Also since you are by now more experienced with the app (no need for a video) would you be able to tell me if it’s possible to specifically or narrow down the problem with my adaptive headlight and rear wiper. Thanks again for the vid, it helped make my decision to purchase the app, just need to check if the tablet I bought is compatible
Hi I’m glad the video helped. Yes, once you doable cold and warm checks, you will no longer be notified if the bulb goes bad. As far as headlight and wiper, the app will scan and read if there is an error, but it won’t tell you exactly what it is. It may say adaptive error only and you have to figure out what’s wrong with it.
I need to replace fuel rail sensor. Can the tool pressurize my fuel rail?
Yea, you can prime the fuel pump to pressurize the rail.
Can I program a key fob from my other e90 using protool?
Hi, no it cannot program keys.
Can I code out the airbag light. I put race seats in my e90 and now the occupancy seat mat fault is on
Yes you can. It is under safety-Airbag and then coding
Can i code my 2005 320i e90 with this ?
Yes
Is that possible to reset the rain sensor in this tool?
Its possible to program or code a new replacement odometer?