3 Common Mistakes Refilling Canon Printer Ink Cartridges
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Welcome back, ink aficionados! Today, we're diving into the world of Canon printer ink cartridges and the not-so-obvious mistakes people make when refilling them. Picture this: you're in the middle of an important print job, and suddenly, your printer throws a tantrum, spewing out smeared and faded pages. Frustrating, right? Well, fear not! In this video, we're going to unveil the top three common mistakes that can turn your refilling adventure into a colorless catastrophe. So grab your popcorn, settle in, and let's save your prints from potential ink disasters!
We go over three major mistakes that people make when they refill integrated cartridges. We overfilled a cartridge intentionally and were able to fix it with a priming syringe.
SHOP NOW: bchtechnologie...
Chapters:
0:48 Mistake #1: Running a Dry Cartridge for Too Long
1:10 Mistake #2: Overfilling the Ink Cartridges
2:40 Mistake #3: Giving Up Too Soon
For other helpful videos, go to / bchtechnologies
For printer repair:
🢡 Visit us: BCH Technologies, 506 Radar Road, Suite B, Greensboro, NC 27410.
🢡 Send the printer for repair! bchtechnologie... Yes! We repair DTF, DTG, and sublimation printers too!
🢡 Donate your printer to us! Contact support@bchtechnologies.com
More support options for your printer device are available at support.bchtec...
Continue the Conversation: support@bchtechnologies.com
FACEBOOK: / bchtechnologies
TWITTER: / bchtechnologies
INSTAGRAM: / kevinatbch
LINKEDIN: / bchtechnologies
TIKTOK: / kevinsinknmore
SHOP NOW: bchtechnologie...
About BCH: BCH Technologies is an innovative company focusing on ink and related products. Founded in 2011, the company transforms how people and businesses refill their printers through innovative technology solutions. Our core purpose guides the research direction of 1) preventing land waste and 2) bringing customers better products with lower costs. Every day, over one million ink cartridges are thrown into landfills worldwide. The company has focused on working with businesses of different sizes, from Fortune 500 companies to entrepreneurial starters, to develop custom ink, spanning from printer ink to stamp ink, re-entry ink, indelible ink, redaction ink, invisible ink, and more.
This video was produced by Kevin at BCHTechnologies.com.
Hey Kevin!
Just wanted to thank you bro! For the very useful and accurate instructions. Specially, this one: "Do NOT give up too early...!"
I've got a TS3440 PIXMA which has PG-440 & CL-445 cartridges. And I used to refill them with insulin syringes, without no trouble. But, after awhile the black cartridge stop printing even after refilling (I did not used to prime the cartridges at that time nor was aware of its necessity!) So I've end up breaking open the cartridge lid and removing the sponge trying to make an sponge less one, after seeing the near dry and almost white sponge in there. However failed to airproof the lid, everything was fine except for the ink flow to bottom plate. So I had to remove the lid again, though it was very hard this time- I had to sink the cartridge in acetone for several hours, trying to place back the sponge, fixing the gaps & ...
After all, the most valuable tip of you which I kept in mind was "Do NOT give up too early, show your printer who is the boss!"
Thank you brother, thank you very much!
your videos are interesting i've learned how to fill the cartridge and everything about my printer thanks a lot
Thanks for subscribing! You are very welcome!
Very informative! Thanks a lot for the video.
Thank you for your video. I would like to know if I can still fix my colored cartridge canon. I accidentally filled the yellow compartment with black ink
Wow, very specific, great video, thanks bud
its just 2-3ml per color and 5ml for black right?
I love the fact that you’re exposing some snarky practices with cannons sales policy.
“End user feedback” - just make it a straight up infomercial for BPH and let me know if the syringe is part of the refill kit etc. etc. etc.
Furthermore, the first thing I have to do is go find out how to get rid of the page counter
Buy HP. HP does not have the counters or even the WIC issue
Best to insert needle to bottom and refill slowly. This avoids air and keeps the siphoning good. Pop the top and wash out sponges. Prime a bit. Head cleaning. Windex and IPALCOHOL for a major overhaul. If that all falls toss it n buy a newbie. I don't recommend spongeless. The sponge is needed to slow delivery of ink.
How do you pop out the top? I tried but not worked
@@KelvinsurajRepairs petrol dabbed on the seem and then the right type of blade, exacto knife. Cut and eventually pry open. Don't cut off a finger
@@Swenser kk i may cut a finger off but i dont want it anyway
@@Swenser i only want my ink lol😂😂
@@Swenser I would not recommend inserting needle too deep as hole in sponge or filter can be damaged
Hi Kevin, Do these cartridges need to be reset for page counts after refilling? Also will this printer error out with a full waste ink pad?
Those are "gray" cartridges, which you disable the printer's ink monitor (turns gray), so you can printer forever. However, they cannot be reset. The HP is almost the same way except if you rotate a few sets, the HP will forget the cartridge and mark it as full again. The Canon will never let you be "full", but it will keep working.
Please someone help me out, after refilling my cartridge it is not supported by the printer.
I refill mine but now red prints came out orange if the red is dark its brown0
Hello Sir
I bought 445, 446 new ink cartridges because the old ones were used for a year refill but dead....
Now the printer is not recognizing the new genuine cartriges
Can you help me with a solution ?
How to trick the printer accepting them?
Anyway to reset it?
I am using MG2540, i also have MG2440
Appreciating your usual support
After refilling the black ink, the printer says low ink, what could be the problem
Keep printing. You can't "reset" the chip. Just keep printing until one day the printer stops you and says "Error 1688 (or 1686,...)" the following cartridge is depleted. Do not close that window. Keep the window open and press and hold the STOP button for 5 seconds. The STOP button is the one with a red upside-down triangle, not the scan button. You will hear a click, and the printer is back to work. It won't track the cartridge ink level anymore, and you can add ink as many times as you want.
How to fix the head alignment if the printer cant even print a good printer algnment
Hello there, everytime i try to refill my black cartridge, it seems to leaking much of ink from the nozzle right after i refill it, even after i tried to do ink suction with priming clip, what cause the problem? is it because i overfill it?
Overfill or because you injected the syringe too deep that it has punctured big hole in sponge or the filter
@@shrujanamsyama9940 thanks for the reply, it seems that I overfill it because after I do ink suction with the priming clip and a few usages later, there is no more leaking ink from the nozzle
After filling color { 746 cl canon } print yellowish and some line also come what to do know please suggest me
You need to prime the cartridge.
How to stop over Flow yellow ink line in photo printing.i am helpless to resolve this problem
First, make sure the cartridge is not overfilled. The cartridge has a sponge and your goal is to get the sponge wet, not soaked. Many people believe there is a swimming pool inside the cartridge and fill the ink to the rim. Don't. For the overflow cartridge, just leave them in the printer for a day or two, then take them out and wipe the bottom clean. Secondly, if the leakage only happens during photo printing, try to print a few color pages with yellow and see if it helps.
Marathi nahi ka
mashin rest nahi horahai