s400!!!!!!!!! i have a truck i’ve drove cross country and i love it. had it since i was 18. im 25 now. i love this series brings me back and is making me build my truck back in the day ive had sitting in the yard for the past years cause i keep blowing up e40ds but shes in my shop now, along with a bunch of other projects 😎
@@Forest__Spirit pretty sure the head gasket would still push out. If you’re doing the arp head studs, you might as well do the little bit of extra work and do the head gasket too. It would reliably sit at 10lbs with head studs and a head gasket. The KAs are too easy to work on to excuse doing the head gasket, in all honesty.
lol not if he gets a 30/35r sized turbo and e85. they don’t like boost right away and small exhaust housings create too much back pressure, 30r id the smallest you should go on a KA unless you do like a 1.01AR housing on a 28r. i have basically a gt3571r or 5462 and it works great on my stock block
@@nalzlol1he’s averaging 12% of his subs watching so while 50-80k veiws is good it’s not so great when you have almost half million subs. A lot of subs are OG viewers that just don’t want to stay around for the “ADHD” projects, love this channel I’ll always watch and support but it’s a huge disservice to everyone that we never get finished builds.
The concern with the van towing is the huge gay wheels. Not the engine size. It's a 7.3 it could probably tow your whole country. But not with those wheels And to be fair a I think a e350 is only rated to tow like 6-7k so with a trailer, car/s tools and people it is pushing it
The partial voice track of the funniest Rudnick lines, mixed with the video b roll is the best!! Great video formatting and editing, nice work Matt & team.
Dark ass window tint full powter coated lift kit and rock lights and wheel lights with a nice sound system with a full stainless steel exhaust Would clean that up a lot
Crystal eyes led tails look really good on these also it’s super easy to put the new style nose on them all panels bolt on directly .cost about 800$ for a clean front out of a junk yard
Dude his yard looks badass! can we have a tour?? How is there not a sick little boosted sbf drift fox body? Like a four door Fairmont or something haha.
Bruh if you start to strip a head on a screw, just put a little dab of valve grinding compound on it. That or some spit and dirt if you have nothing. Rubber band works. They also make special Phillips bits that have a bladed edge almost. A lot more expensive but they’re amazing. All I used on aircraft.
if u went through the effort to quigley convert the van itd be too cool but alot of effort and money but youd get the extra height u need and have a sick 4wd diesel van
Grab some ambulance package front coil springs by MOOG gives you like 1+ inch lift and you can put a urethane spacer on the bottom bolted into the coil bucket for more lift to clear the wheels
Brooo don’t hype us up on another and let it sit finish this thing the OG’s deserve it! Love the content as always just get back to it in reasonable time!
![[LIVE] : ONE ลุมพินี 68 | คู่เอก "พระจันทร์ฉาย vs โจนาธาน"](http://i.ytimg.com/vi/F3IM3w-XchI/mqdefault.jpg)
This season of Haggard Garage will save this channel. Breath of nostalgic air.
doubt
@@lookoutlava7293It’s a breathe of fresh air and mint
It’s got me watching more of his uploads than I would have before. So I guess it has me back for now
she needs the old turbo back in
heeelll yea, either back to the ol semi truck turbo again or a new compound setup
s400!!!!!!!!! i have a truck i’ve drove cross country and i love it. had it since i was 18. im 25 now. i love this series brings me back and is making me build my truck back in the day ive had sitting in the yard for the past years cause i keep blowing up e40ds but shes in my shop now, along with a bunch of other projects 😎
@@redsage6550a compound setup on a stock motor is just foolish. Going for big power in a 7.3 isn’t the move.
@@waimeagavin808 who said anything about a stock motor 👀
@@waimeagavin808 now if it were a built 6.0 ... big power
Chris got ZESTY with the cobwebs 😂💀
RUDNIK, the KA WILL push the head gasket at 7lbs. The stock head gasket will not allow anymore.
Cant they chill at 11 psi if you do arp studs ?
@@Forest__Spirit pretty sure the head gasket would still push out. If you’re doing the arp head studs, you might as well do the little bit of extra work and do the head gasket too. It would reliably sit at 10lbs with head studs and a head gasket. The KAs are too easy to work on to excuse doing the head gasket, in all honesty.
@@Chry_Bmb who changes from bolts to studs without changing the gasket ?
lol not if he gets a 30/35r sized turbo and e85. they don’t like boost right away and small exhaust housings create too much back pressure, 30r id the smallest you should go on a KA unless you do like a 1.01AR housing on a 28r. i have basically a gt3571r or 5462 and it works great on my stock block
I run a unopened ka-t on 12lbs no problem. 7lbs is nothing
Love the vide bro but please bring back the longer ones miss sitting down for 30-40 mins and watching everything
can we just take a minute to acknowledge how much better mat is looking! Keep up the good work!
Fucking love the van dude always have. LET ORION TOW WITH IT LIKE THE GOOD OL DAYS RUDDY
I love how hyped up Orion and rudnick get each other each video!!
Man this has been my absolute favorite channel for years I really hope the views go back up don’t stop ruddy
Views are 50-70k which is normal for rudnik
he used to average 80k to a lil over 100k at one point but 50k to 70k is still decent for the amount of subs
@@nalzlol1he’s averaging 12% of his subs watching so while 50-80k veiws is good it’s not so great when you have almost half million subs. A lot of subs are OG viewers that just don’t want to stay around for the “ADHD” projects, love this channel I’ll always watch and support but it’s a huge disservice to everyone that we never get finished builds.
@mwomble8452 that's facts
Channel very save able too
He just don't use his brain at times
God dude it’s straight nostalgia seeing you and orion back together. CONTENT FOR THE OGS ❤️
In New Zealand that van would be used to tow any trailer any size any time etc Americans need a 7.9 ltr diesel to tow what we tow with a Japanese 2.0
The concern with the van towing is the huge gay wheels. Not the engine size. It's a 7.3 it could probably tow your whole country. But not with those wheels
And to be fair a I think a e350 is only rated to tow like 6-7k so with a trailer, car/s tools and people it is pushing it
The partial voice track of the funniest Rudnick lines, mixed with the video b roll is the best!! Great video formatting and editing, nice work Matt & team.
The amber corners make those headlights pop so much more plus the clean up .. good job guys !
loving the van content ruddy!! just wish the vids were back to the 40 minute bangers 🔥🔥🔥
*edits are fire btw mat 🔥keep it up!!!
I absolutely agree
I've been sayin the samething. I miss the longer videos.
7.3 van is a beast! I thought yall would have done the 08 front end swap, it bolts right on. Those 7.3 are hard to find.
id just buy a whole new van body get rid of the rust and have a nicer cab u can find blown vans for almost nothing
7 befores no after! Looks dope though
These recent van videos have big nostalgic vibes 🔥
*This is actually the best build in years!* ✅
I’m tweakin over this van build
OG HAGGARD MEMEBER RIGHT HERE
Dark ass window tint full powter coated lift kit and rock lights and wheel lights with a nice sound system with a full stainless steel exhaust
Would clean that up a lot
No wheel lights...
Ew
congrats on coming out the closet
Love the van, definitely gotta become Orion’s daily once finished
The old tow mirrors on the box van is a vibe I say run them will look good with the extreme wheel poke
Van is back to mint like the old days
Love too see the old van back!
project make the mint van great again is starting to come together definitely have to trim those new fenders 😂
Crystal eyes led tails look really good on these also it’s super easy to put the new style nose on them all panels bolt on directly .cost about 800$ for a clean front out of a junk yard
OG Budget build . Love this shit, keep er goin boys !!!🇨🇦🇨🇦
This is the type of content I have missed.
Last time I seen ruddy in a golf cart it ended up in a pond and will almost lost an eye 😂😂
Let's go Mark 95 Mustang With a 347 stroker running a 76mil Turbonetics on a holley over here
Finally, some content that doesn’t involve a Nissan or a BMW
Don’t stop with the van content!!
This retro arc is restoring my faith in car TH-cam
Loving the videos with Orion and the van!
Lift kit will definitely tie it all together
Love seeing Orion back in his element 👌🏻🤘🏻
*The Front bumper should definitely stay off! OG vibes and looks way better*
The amount of time it takes to create content. All day and you guys got a grill and parking lights swapped 😅
😂😂😂😂😂 It's all about quality...
Dude his yard looks badass! can we have a tour?? How is there not a sick little boosted sbf drift fox body? Like a four door Fairmont or something haha.
I like the idea of Mint text on one side and junk on the other side!
Those tires on the van look absolutely feathered/chopped
This van needs good og mint livery :)
Dude thing is SICK you should try and get some one to make a cool haggard x mint wrap and throw it on that thing
Cool raunch livery coming soon!
Let's get that megasquirt on the 240!
It truly is sad.. all the money these guys have. not one of them has a decent pressure washer.
And a different tip on it!
I'm just happy we're getting dailys, loving the van content
I'm proud of Orion for pushing through his misery and keeping working! Some people don't do as good in real got and humid weather! Awesome video guys!
Damn y'all need to pickup that foxbody in the beginning
She cleans up nicely 👌
You guys should pull off the intercooler and piping or just do it on the van but polish and shine them up some to match the wheels
ngl, I HATED that fucking van at first but its really starting to grow on me lol that thing is pretty badass with the wheels
Your killing it Chris. Good job !!
I'm not gonna lie, it's still cool to see you and Onny working together one mo gain.
stoked for the van hell yea!
Gotta polish the IC pipes. It will work with the wheels
needs the baja grocery getter lift kit
ANOTHER BANGER BOYS!!
"Everything off the eeeeeeee" 😂😂
Those clips were dope at the end 👍
Rudnik basically Orion from the haggard days now.
Might as well lift the van now 😂😂
Wanna see what darvis can do with that big of a canvas
Bruh if you start to strip a head on a screw, just put a little dab of valve grinding compound on it. That or some spit and dirt if you have nothing. Rubber band works. They also make special Phillips bits that have a bladed edge almost. A lot more expensive but they’re amazing. All I used on aircraft.
I loved the editing in this one Matt’s killing it
Im like seeing all the mustangs at Marks 😃
Extreme heat is no joke. Take breaks often and drink way more water than you think you need.
Front end came out 🔥🔥🔥
On my Denali I tow a 2 car trailer with built jeeps on them and escavators. You’ll be fine. These wheels are strong surprisingly
Okay lets be real now. Orion put the 7.3 van on the map. No one ever geeked out on these vans this much lol
10:12 loving this POV
I love it boys Keep it going its amazing to see this i love it so much me and others love it as well keep it coming boyz
At 4:31 What the Fock was that sound Dude
Looks friggn stoopid. I love it
a trick ive found with those screw clips is go gentle or pry up and screw
Young Static is the G.O.A.T.
3 weeks?!! No wonder Orion was ready to "go home"!! Damn son lol
Whistling diesel had a tank one one of them rims .. I think it will handle a one car trailer lmao
Orion is such a 🏝️
if u went through the effort to quigley convert the van itd be too cool but alot of effort and money but youd get the extra height u need and have a sick 4wd diesel van
Remember when he wanted to body swap that van 😂
The van is looking sick
I waited my whole day for this video
Tow the Genesis with the Mint Van with ear muffs on. Have to for the memes.
Someone should get the wheels on that yellow mustang
BIG bolt on fender flares.
A lift kit just so it turns,fix the radio,maybe wood floors at the back and a interior haha and she will be mint as f**k
Gotta spray Junk or Mint on the intercooler 👌 Grab a Mustang and build a sick drift car
Mark's really the king of the trailer park
That van is going to look sick when it's lifted
also daily reminder that mark is a fuckin G
Grab some ambulance package front coil springs by MOOG gives you like 1+ inch lift and you can put a urethane spacer on the bottom bolted into the coil bucket for more lift to clear the wheels
please continue the build so much
Yall should paint or wrap it mint
Throw some flares on it, dump it and turn it into a Japanese style drift van!
Brooo don’t hype us up on another and let it sit finish this thing the OG’s deserve it! Love the content as always just get back to it in reasonable time!
Bro. Well see the van in 6 months
Time for the van to get new rubbers and bushings etc..
I wonder how much Ruddy is paying Orion cuz I’m wondering how much work Orion actually does.. cuz in most clips it looks like he’s just chillin
new school A-Team van hahaha