brother as always you show the real world of what,s really going on ,,,,, with this guns and tools for beginner like me.. i love it brother ,,, i got me a vevor ,,, i also got me an R500 ,,, i got me an italco b4000 l.v.m.p ,,,, is same as sata b4000 l.v.r.p ,,, for sure i am learning with your videos thank you so much
Hi UPK, Good Video Buddy! FYI That HF Compressor (I have the exact model) puts out 4.7CFM @ 90PSI and 5.8CFM @ 40PSI. You were spraying at 30 PSI so I'm guessing you were consuming around 6.0 CFM. My compressor fills to 125psi then cuts out and comes back on at 80psi. The refill with "nothing attached" takes 1.5 minutes from 90psi back up to 125psi. I broke out my R500 and set the gun to 30psi and sprayed until the compressor kicked on and I was able to spray for 1 minute 50 seconds. I continued to hold the gun (settings wide open for both) open and it took the compressor 7 minutes to shut off. The motor cylinder was HOT but running fine. Here is my take. Because these small compressors are basically running non-stop after the initial spray both the compressor and the compressed air are getting hotter and hotter. That means moisture and oil vapors! I think an oil trap and a coalescing filter is a must. What do you think?
Black widow 2.0 ,the people's paint king ,good luck to everyone, who ever wins will always remember winning something nice ,because most of us never have won something,
Sir, thank you for a very helpful video - I have a 5 CFM compressor with 50 liter tank and was hesitant to buy a quality HVLP gun in case my compressor wouldn't cope up - but it seems it won't be a problem - thank you again
Black widow 2.0, true ppls champ!! Been painting cars at carmax for a year and a half now and about to open my shop at the end of this month. You helped me more than you could imagine bro thank you for everything
Thanks for the great content! I downgraded my garage and replaced my monster compressor to a 30 gal single stage 120v compressor. I'm setup for auto engine and welding so I no longer needed the big guns and use mostly 18v cordless tools. That being said, I'm interested in body fender and paint work. So thanks again for this!
I have a 29 gallon HF compressor 4.5 cfm at 90 psi. I'm planning to use an Eastwood Concourse LT100 and this video has made me feel good about it. Thanks!
Bare love for replying back so im purchasing the areopro a610 guns 3 of them will they suffice in Sealer, base, clear Also what tips size you recommend for each stage my bro
Good work on that bumper. I also acquired a Black Widow HTE. Looking to do small jobs on my own cars.The video gave me some ideas. Keep the videos coming Peoples Champ.
@@UndergroundPaintKing- heads up.. let everyone know be cautious of scammers sending out claims they won and asked for delivery and insurance fees.. Scammers just hurt people on another paint channel giveaway..
@@UndergroundPaintKing - sadly it happened this week.. I just didn't know if you wanted the name of the channel to check it out.. just didn't want anyone taken in this family
I have a black pearl Grand Cherokee that you have inspired me to repaint the roof due to the clear coat going bad on it. your video is really clear on laying the paint down with a small compressor. Thanks.
I added a second tank to my air compressor to get more air flow I now have two 25 gallon air tanks hooded up side by side for my home paint jobs because the single tank wasn't enough to keep up been painting for over 34 years as a RV body man painter at work we got a 1000 gallon tank to run our shop for up to 24 workers to use at the same time
UPK, the videos here on your channel were my complete inspiration for doing my own paint on my '67 VW convertible, using the Sprayit 500 LVLP and H.F. 29 gal. compressor. Came out nice, despite being a fussy single stage red. I can't thank you enough for sharing your incredible knowledge in such a "user friendly" way! Now I gotta try that Black Widow!! Keep it coming!
It’s always great to hear success stories like yours, I hope the channel continues to be helpful and let me know what you think about the black widow if you give it a try 🙏🏽💯
Well the way u know how to do a pu bumper I know you will know my brother im at a stand still on my car right now cause I need to know how to prep them for paint I be spreading yre channel on my face book and other channels you a awsome painter u know all the tricks I would appreciate it my brother
Realistically your favorite gun, the A610 isn’t really that much lower than this gun. The Chinese marketing advertises it as 3-3.9 cfm but Pete’s Hobbies measured it closer to 8cfm which isn’t at all surprising since that gun requires 35+psi to spray well
Between your videos and Paint Society's videos I've learned so much, when I first started looking into painting I was getting discouraged because everyone online says you need a $2,000 compressor and high end equipment to get a quality job and you prove time and time again that's not the case. Do you think this setup in this video could paint a whole truck?
I’m glad that I could help in any way with the videos Joseph 💯 you could do a whole truck with this setup but you would have to be aware of the pressure dropping on you as you’re spraying so you would have to wait at times for the compressor to catch up and then continue, but it’s very possible to do!
Great video UPK - Yes it's nice to have a huge compressor but not necessary. I've had pretty decent luck using smaller ones. Keep up the good work my friend 👍💯
Great video as usual bro!!...i just received my astro euroHTE spray gun an also ordered a vevor LVLP....will be using a 30 gallon compressor..you just gave me confidence to use the HTE being it consumes more cfm! ..thank you!
Bruh I have been watching your channel for about two years and now I’m going to try and paint a tailgate on my truck first, hopefully it comes out good I will let you know.
Great video UPK with some great advice and busting a few myths about using a HVLP or any full size gun on a small compressor, I normally only do single panels but I used to use one of those direct drive 50L (10 gallon) compressors and had no problems using my ProLite, DV1 and my Sata X5500. I now have a bigger belt drive which I got more for my own sanity than the guns as that direct drive was driving me nuts with it's constant drone in my lugholes🥴🤪😂John UK
Right, and the storage running out is what causes the drop in pressure to the spray gun and the waiting game begins if you’re doing a big job but on smaller jobs such as this, it isn’t a big issue to tackle! I appreciate you checking out the video 💯
Like, comment, and SHARE this video to spread the word on the giveaway 🚨💯🤘🏾
What’s da ticket on the Biarritz?
U got a video on how to sit tht DV1 not tha digital one
@@thabigghomie_ I don’t have a DV1 BiggHomie
brother as always you show the real world of what,s really going on ,,,,, with this guns and tools for beginner like me.. i love it brother ,,, i got me a vevor ,,, i also got me an R500 ,,, i got me an italco b4000 l.v.m.p ,,,, is same as sata b4000 l.v.r.p ,,, for sure i am learning with your videos thank you so much
@@moutonisntscaredtofail1968 it’s not for sale at the moment
You should do a video on the difference between all the different types of guns, hvlp, hte, lvlp, standard. Awesome video as always UPK.
Thanks Factory Rat Garage, I appreciate you checking out the video and I’ll work on that video for you!
Hi UPK, Good Video Buddy! FYI That HF Compressor (I have the exact model) puts out 4.7CFM @ 90PSI and 5.8CFM @ 40PSI. You were spraying at 30 PSI so I'm guessing you were consuming around 6.0 CFM. My compressor fills to 125psi then cuts out and comes back on at 80psi. The refill with "nothing attached" takes 1.5 minutes from 90psi back up to 125psi. I broke out my R500 and set the gun to 30psi and sprayed until the compressor kicked on and I was able to spray for 1 minute 50 seconds. I continued to hold the gun (settings wide open for both) open and it took the compressor 7 minutes to shut off. The motor cylinder was HOT but running fine. Here is my take. Because these small compressors are basically running non-stop after the initial spray both the compressor and the compressed air are getting hotter and hotter. That means moisture and oil vapors! I think an oil trap and a coalescing filter is a must. What do you think?
It’s good to have those for your setup Danno, I personally don’t use them when I’m painting but they definitely work!
Black widow 2.0 KEEP up the good work brother
Good luck ❗️
Black widow 2.0 ,the people's paint king ,good luck to everyone, who ever wins will always remember winning something nice ,because most of us never have won something,
Good luck ❗️
another great vid! I bought a small compressor before I truly knew what I needed...so now I'm on the LVLP train
Thanks Jonny, you can’t go wrong with that small setup 💯
Sir, thank you for a very helpful video - I have a 5 CFM compressor with 50 liter tank and was hesitant to buy a quality HVLP gun in case my compressor wouldn't cope up - but it seems it won't be a problem - thank you again
You’re welcome and I’m glad the video was helpful!
You Sir are a TEACHER! Thanks!
Thanks Scott, I do my best to help out 🙏🏽💯
Black widow 2.0. ❤ love it!!
Good luck ❗️
The King dropping that knowledge again, dang that bumper cover looking 🔥That 2.0 looking good.
Thanks King
Thanks for checking it out Frank, the black widow does a nice job!
Kang
@@bpatinas1578 appreciate you 💯
Saw that gun yesterday. The Black Widow. That black and red color combo always hits. That was one of the reasons I picked up the A610.
Those are my colors, they definitely look good and are both great spray guns
Love that widow. I do work myself and have done 3 completes with a small compressor. I use hvlp guns.
Nice 💯 the black widow is definitely a nice spray gun💯💪🏾
Thank you for teaching the new generation king, and of course the older too, beautiful job 👏
You’re welcome Nelson, I do my best to help my people out 💯
Black widow 2.0, true ppls champ!! Been painting cars at carmax for a year and a half now and about to open my shop at the end of this month. You helped me more than you could imagine bro thank you for everything
Glad I could help in anyway possible, Good luck ❗️
Thanks for the great content! I downgraded my garage and replaced my monster compressor to a 30 gal single stage 120v compressor. I'm setup for auto engine and welding so I no longer needed the big guns and use mostly 18v cordless tools. That being said, I'm interested in body fender and paint work. So thanks again for this!
Glad the video was helpful and I appreciate you checking out the channel 🙏🏽💯
Black Widow 2.0! Don’t ever stop posting these helpful videos!
I got you Jose! Good luck ❗️
Black Widow 2.0 we are the committed! Stay up!
@@kilam68roe7 stay up Fam 💪🏾
Black widow 2.0 thank you for your time🐝🍯
You’re welcome and Good luck ❗️
I have a 29 gallon HF compressor 4.5 cfm at 90 psi. I'm planning to use an Eastwood Concourse LT100 and this video has made me feel good about it. Thanks!
You’re welcome and I’m glad the video was helpful 💯
I read detailed compressor datasheet somewhere, as long as I remember if it deliver 4.5 cfm at 90 psi means around 9cfm at 30 psi.
@@wiradharma7030it’s more about 6 cfm @40 psi
Black widow 2.0 . Lets get it. Keep up that hustle. I just received my first customer. Hoping it goes well 😊
Good luck ❗️
Just bought this im gonna TH-cam learn and try my luck.
@@garymartin200 nice❗️I hope the channel is helpful to you and good luck 💯💪🏾
That Finnish is perfect bro
Thanks Izreal 💯 I appreciate you checking it out 💪🏾
Black Widow 2.0!! 🤞🏻🤞🏻
Thanks for doing these videos. I'm sure it's helped a lot of people. I know they've helped me! Peace!
I’m glad the videos are helping and Good luck ❗️
Baxj Widow 2.0 and you seem great with any gun
I appreciate that Tony, Good luck ❗️
Blackwidow 2.0, thanks for all the help starting this auto paint jorney!!
Good luck ❗️
It’s your boy he’s back with another great video…..keep up the great work my brother…..you the man
Appreciate you Hank🙏🏽💯
Black widow 2.0. You helped this diy a lot.
Good luck ❗️glad I could help 💯
Black Widow 2.0. Great content. I just paint my own motorcyle parts, your videos helped me a lot
Good luck ❗️
I painted my Harley with a 10gal compressor and a DeVilbiss HVLP gun and it came out fantastic.
Awesome! Good to hear successful stories like this 💯💪🏾
Hi bro i have a 50 litre hyundai silent compressor which 2.5hp and 11cfm 8 bar will i be able to spray paint
@@mohammedsabeel50yes you should be able to paint
Bare love for replying back so im purchasing the areopro a610 guns
3 of them will they suffice in
Sealer, base, clear
Also what tips size you recommend for each stage my bro
@@mohammedsabeel50 I use 1.3-1.4 for base and clear and 1.5-1.7 for primer and sealer
Black widow 2.0 thanks for your instruction!
You’re welcome ❗️
Black Widow 2.0 . Me needs me one 😊
Good luck ❗️
UPK thank u for always sharing ur Great gifts with all of us God Bless u always 💪🏽💪🏽💪🏽💪🏽💪🏽
You’re welcome Richar, I really appreciate you and God bless you also💪🏾
You the man. Great job on that bumper. Thank you for teaching us rookies.
I appreciate you checking out the video and I’m glad I could help 💯
Good work on that bumper. I also acquired a Black Widow HTE. Looking to do small jobs on my own cars.The video gave me some ideas. Keep the videos coming Peoples Champ.
Glad the video was helpful Hi Desert Dave, I appreciate you checking it out and I hope the black widow works well for you 💯
Black widow 2.0 UPK THE GOAT
Good luck ❗️
Black widow 2.0 ❤❤❤❤
Good luck ❗️
@@UndergroundPaintKing thx
@@gadgetsc9 you’re welcome
Blackwidow 2.0
June 2nd.. Blowing it up 💪💯💎
Good luck ❗️
@@UndergroundPaintKing- heads up.. let everyone know be cautious of scammers sending out claims they won and asked for delivery and insurance fees.. Scammers just hurt people on another paint channel giveaway..
@@rockycaruso387 appreciate the heads up, I wasn’t aware that happened on another giveaway
@@UndergroundPaintKing - sadly it happened this week.. I just didn't know if you wanted the name of the channel to check it out.. just didn't want anyone taken in this family
@@rockycaruso387 you don’t have to say the name of the channel but I’ll definitely keep that in mind
Black widow 2.0. Let's go!
Good luck ❗️
I have a black pearl Grand Cherokee that you have inspired me to repaint the roof due to the clear coat going bad on it. your video is really clear on laying the paint down with a small compressor. Thanks.
Nice 💯 I’m glad the video was helpful and I appreciate you checking it out !
Nice demonstration on how to paint with different types of guns and knowing how to make use of the cfm.
Thanks Fidel, I appreciate you checking out the video and I hope it was helpful 🙏🏽💯
Nice job on the bumper!
Thank you and Good luck ❗️
I added a second tank to my air compressor to get more air flow I now have two 25 gallon air tanks hooded up side by side for my home paint jobs because the single tank wasn't enough to keep up been painting for over 34 years as a RV body man painter at work we got a 1000 gallon tank to run our shop for up to 24 workers to use at the same time
Nice! I have to of the same 21 gallon compressors and I plan on putting them together at some point. I appreciate you checking out the video Paul💯
Black widow 2.0 , see you guys at the live show!!!
Good luck ❗️
Black widow 2.0 💪💪
Good luck ❗️
Black Widow 2.0. Let’s go!
Good luck ❗️
sweat and work put into informative videos for us to enjoy for free, keeping it real through 2024. Thank you UPK! 💯
Doing my best to keep it real, appreciate you as always FacesintheStone💯
Black Widow 2.0. Hope I'm able to go live, but I work 9am to 6 pm on Sunday, June 2nd
Good luck ❗️
Black widow 2.0 definitely learning alot keep up the great work
Good luck ❗️
Black widow 2.0 i can use one👍👍👍
Good luck ❗️
Black Widow 2.0. Teach me more!!!
Good luck ❗️
Black widow 2.0
UPK doin it right!
Good luck ❗️
Black widow 2.0.. if I win this be my second gun in to this field 🔥🔥🔥
Good luck ❗️
@@UndergroundPaintKing thanks a lot appreciate it. One question how much reducer you normally put in your clear?
@@lensvlog2400 you’re welcome and I don’t put reducer in my clear
@@UndergroundPaintKing ok awesome. Which would you say you like to use mostly if I may ask
@@lensvlog2400 on my everyday work I’m using Finish 1 clear at the moment and for my real nice jobs I’m using Grant 7 Oh My clear
Black widow 2.0 ! Thank you so much King for all your advice!!
You’re welcome and Good luck ❗️
Black Widow 2.0 your channel is extremely entertaining and I learn a lot?
Good luck ❗️
Black widow 2.0! Up king you can’t imagine how mane stuff I’ve learn from you and if I win the gun-- o boy I’m gonna scream 😱
I’m glad I could help and Good luck to you ❗️
Just got my air compressor 25gallon 4.5hp and harbor freight gun ready to start painting would love that 2.0
Nice💯 good luck to you PawPaw💪🏾
Black widow 2.0 video help me alot
Glad the video was helpful and good luck ❗️
Get’r done King😉😉
Appreciate you Billy💯💪🏾
Black Widow 2.0. Just getting into painting. UPK
Good luck ❗️
Black Widow 2.0!
Good luck ❗️
UPK, the videos here on your channel were my complete inspiration for doing my own paint on my '67 VW convertible, using the Sprayit 500 LVLP and H.F. 29 gal. compressor. Came out nice, despite being a fussy single stage red. I can't thank you enough for sharing your incredible knowledge in such a "user friendly" way! Now I gotta try that Black Widow!! Keep it coming!
It’s always great to hear success stories like yours, I hope the channel continues to be helpful and let me know what you think about the black widow if you give it a try 🙏🏽💯
Black widow 2.0
True people’s champ
Appreciate you Ron, good luck ❗️
THIS VIDEO WAS VERY HELPFUL, I THOUGHT IT COULDN'T BE DONE,BUST MY BUBBLE,THANKS BRO.❤❤
Glad the video was helpful Lesli💯
@@UndergroundPaintKing YEAH MAN THIS BLEW ME AWAY,I THOUGHT IT WOULD JUST SPLATTER,THAT'S 7 CFM APART
Black widow 2.0
Thanks champ, keep up the great work
Appreciate you and good luck ❗️
@@UndergroundPaintKing depends how work goes, hopefully I make it to the live
@@SKMopars I will attempt to do it at a time that suits everyone
Well the way u know how to do a pu bumper I know you will know my brother im at a stand still on my car right now cause I need to know how to prep them for paint I be spreading yre channel on my face book and other channels you a awsome painter u know all the tricks I would appreciate it my brother
@@jeantaylor6785 I linked a video , hope it helps
Realistically your favorite gun, the A610 isn’t really that much lower than this gun. The Chinese marketing advertises it as 3-3.9 cfm but Pete’s Hobbies measured it closer to 8cfm which isn’t at all surprising since that gun requires 35+psi to spray well
Thanks for that info Bryan!
Black widow 2.0 keep it coming bro 💪🏾
Good luck bro ❗️
Black widow 2.0 let goooooo!
Good luck ❗️
Black Widow 2.0! hey, why not? Count me in.
Good luck ❗️
Thanks for the reply back UPK God bless to you and yours😊
You’re welcome and God Bless you and yours also🙏🏽💯
Black Widow 2.0
Let’s get it!
Good luck ❗️
Black Widow 2.0. UPK all the way. Good luck to all.
Good luck ❗️
Black Widow 2.0 lets get it!
Good luck ❗️
Black widow 2.0. Nice work
Appreciate you but we did the giveaway this past Sunday
Black widow 2.0!!!!
Good luck ❗️
Black Widow 2.0 .... Lets Go !
Good luck ❗️
Black widow 2.0 Good luck to all of you guys! Hope for the best
Good luck ❗️
Your instructional videos are always very simple to follow. Great job👍🏽👍🏽
Thanks OldFartsGarage, I do my best to make it simple for my people 💯
Blackwidow 2.0
Good luck everyone! Godbless
Good luck ❗️
Just got that same gun and compressor... gonna try this out tomorrow sir. ... HTE GUN
Let me know what you think Jorel💯
the King doing his thing. Thanks!
Appreciate you greatly Alex🙏🏽💯 you’re welcome!
Black Widow 2.0! Congratz on reaching 20K subs!🎉
I appreciate you 🙏🏽💯
Between your videos and Paint Society's videos I've learned so much, when I first started looking into painting I was getting discouraged because everyone online says you need a $2,000 compressor and high end equipment to get a quality job and you prove time and time again that's not the case. Do you think this setup in this video could paint a whole truck?
I’m glad that I could help in any way with the videos Joseph 💯 you could do a whole truck with this setup but you would have to be aware of the pressure dropping on you as you’re spraying so you would have to wait at times for the compressor to catch up and then continue, but it’s very possible to do!
Black widow 2.0 im ready to paint my 69 nova good luck to all
Good luck ❗️
Black Widow 2.0 lets get it champ
Good luck ❗️
Slick with no tricks!!! I see you my man lol
😂 appreciate you as always Grant 💯
Great video UPK - Yes it's nice to have a huge compressor but not necessary. I've had pretty decent luck using smaller ones. Keep up the good work my friend 👍💯
Thanks Jerry, I appreciate you and you always kill it with your small compressor 💯💪🏾
Black widow 2.0. Congratulations on 20k UPK
Appreciate you and Good luck ❗️
Your compressor looks like you bought it from a Fallout New Vegas vendor. 🤣 You put it through the test of times. Keep puttin in that work my guy!
🤣 it’s a work horse Paa, can’t have them there for decorations 💯
@@UndergroundPaintKingFACTS!!
Black Widow 2.0 ! Good luck to everyone !
Good luck ❗️
That looks top notch!
Thanks Jimmy, I appreciate you checking out the video 🙏🏽💯
Love the video and thanks for the knowledge. Can’t wait until you hit that 20k for the giveaway
Thanks Thomas, I appreciate you and share to help spread the word Fam💯
Great video as usual bro!!...i just received my astro euroHTE spray gun an also ordered a vevor LVLP....will be using a 30 gallon compressor..you just gave me confidence to use the HTE being it consumes more cfm! ..thank you!
You’re welcome, I appreciate you checking out the video 💯 let me know how those paint guns work out for you
Black widow 2.0. Hope I wasn’t late
Bruh I have been watching your channel for about two years and now I’m going to try and paint a tailgate on my truck first, hopefully it comes out good I will let you know.
I appreciate you rocking with the channel for so long and I know you’re gonna knock that tailgate out the park 💯💪🏾
You are the king brother totally awesome love it ! Very inspiring too
Thanks Gary, I appreciate that 🙏🏽💯
Another great job! I was surprised you sprayed right next to a white Cadillac.
Thanks GarageHack, the Cadillac is getting a new color and top so it’ll be fine 💯
Great video UPK with some great advice and busting a few myths about using a HVLP or any full size gun on a small compressor, I normally only do single panels but I used to use one of those direct drive 50L (10 gallon) compressors and had no problems using my ProLite, DV1 and my Sata X5500.
I now have a bigger belt drive which I got more for my own sanity than the guns as that direct drive was driving me nuts with it's constant drone in my lugholes🥴🤪😂John UK
😂 appreciate you John, thanks for checking out the video, always good hearing from you 💯
Would love the black widow to be my 1st paint gun! Amazing video as always
I’ll be giving one away when the channel reaches 20k subscribers so good luck to you 💯
@@UndergroundPaintKing I appreciate it. I'm sure will be 20k in no time
@@GFDthatsMe it’s getting there 💪🏾
Black widow 2.0 champ
Good luck ❗️
@UndergroundPaintKing thank you sir !!
@@chevyharper5681 you’re welcome!
4.7 is probably straight from the pump. But the tank running more cfm until the storage runs out.
Right, and the storage running out is what causes the drop in pressure to the spray gun and the waiting game begins if you’re doing a big job but on smaller jobs such as this, it isn’t a big issue to tackle! I appreciate you checking out the video 💯