I am gonna do cat deletes before I get rid of the resonator to see how true it is about the resonator helping keep the stock sound with the cats deleted
I don’t track but instead go to car shows. Before I had to clean my wheels at the shows with just driving a short distance and now I don’t need to clean them. It is night and day with how there is pretty much no dust. I love it👍🏼
I had a hard time as well. I ordered some Nitto 555s but the front was on national back order. So IU ended up with Pirelli P-ZEROs, 285/35/19 front and 315/35/19 in rear. So far so much better than the stock Micheline's. Discount tire runs sales all the time if you have one near you or you can do their mail order.
I gotta a set of these for my 350 also and need to install them. I put these on my Hellcats also, they make a big difference in the dust and squeeking. I see you didn't install the Caliperfexion studs on your front calipers, they will make a big difference on future front brake pad changes and you also won't wear out your stock knuckles screwing in and out the stock studs. Gonna definitely go this route when I change my front pads out.
Enjoyed the video, I did the Corsa Double X back in 19' and love the sound. I did purchase the Powerstop Z26 pads last fall and waiting for the weather to warm up for my driveway install...having that piston depressor looked like s a big help. Well now that you have the new pads.....the big questions I have, stopping wise how do they compare to stock and the obvious one, has the brake dust been substantially reduced.
I kept the factory x and just had a shop cut out the resonator. The video is in my library if you didn’t see it already. The piston depressor was nice to have and I haven’t had a chance to do a good cleaning of my wheels so that video is still to come. Thanks for watching 👍🏼
No you don’t have to bleed the brakes. I would just open the cap on the brake booster and put a rag around it just in case any fluid runs over. You won’t get any air in the system so you won’t have to bleed them. Good luck and enjoy👍
How’s the drone ?
No drone at all
Dust and noise means the brakes are working right??? 🤣🤣
You know it👍🏼
Nice job! I enjoyed the video. Can't wait for the warmer weather!!
Yea I’m ready to get her out on the road! Thanks for watching👍🏼
I like the Z23, these don't have the metal back plates which tend to make noise.
Is 136 ft/lb torque spec for those nuts?
Yes, for the front caliper bolts
Thanks for the video! I hate the dust on my GT350 wheels. Check it out on my channel.
Thanks for watching and I will check it out👍🏼
Nice Job! 👍 to George. Please do a followup on the stopping feel and brake dust! What a difference the X Pipe made! Be well and Thanks for sharing! 🐍🐍
I will do a follow up but first I need to clean my wheels. It’s starting to warm up here so I can get outside and wash them. Thanks for watching 👍🏼
@@TrucciSpeed I hear that. I’m not that far from you. I’m in PA. near King of Prussia. Waiting for spring as well!
Yes Sir, so you know exactly
Hi just wondering if the new brake pads interfere with the ABS system? Thxs, gus.
No they don’t interfere with the ABS system. They fit and operate the same as the original equipment. Thanks for watching 👍
I am gonna do cat deletes before I get rid of the resonator to see how true it is about the resonator helping keep the stock sound with the cats deleted
That should sound good👍🏼
Any update on dust performance? Do you ever track the car? How is fade and heat performance on track?
I don’t track but instead go to car shows. Before I had to clean my wheels at the shows with just driving a short distance and now I don’t need to clean them. It is night and day with how there is pretty much no dust. I love it👍🏼
Hi just curious, what kind of tires do you have on the shelby? Having a hard time finding tires!!
i run continentals 295 square setup
I had a hard time as well. I ordered some Nitto 555s but the front was on national back order. So IU ended up with Pirelli P-ZEROs, 285/35/19 front and 315/35/19 in rear. So far so much better than the stock Micheline's. Discount tire runs sales all the time if you have one near you or you can do their mail order.
What were those torque specs?
Front T60 @136 ft/lbs
I gotta a set of these for my 350 also and need to install them. I put these on my Hellcats also, they make a big difference in the dust and squeeking. I see you didn't install the Caliperfexion studs on your front calipers, they will make a big difference on future front brake pad changes and you also won't wear out your stock knuckles screwing in and out the stock studs. Gonna definitely go this route when I change my front pads out.
Yea I was thinking about getting the studs. I still have to do a good cleaning of my wheels and calipers. 🤨
Enjoyed the video, I did the Corsa Double X back in 19' and love the sound. I did purchase the Powerstop Z26 pads last fall and waiting for the weather to warm up for my driveway install...having that piston depressor looked like s a big help. Well now that you have the new pads.....the big questions I have, stopping wise how do they compare to stock and the obvious one, has the brake dust been substantially reduced.
I kept the factory x and just had a shop cut out the resonator. The video is in my library if you didn’t see it already. The piston depressor was nice to have and I haven’t had a chance to do a good cleaning of my wheels so that video is still to come. Thanks for watching 👍🏼
Great video and content ! Do you have to bleed the brakes as well? I just got the same exact brake pads delivered today !
No you don’t have to bleed the brakes. I would just open the cap on the brake booster and put a rag around it just in case any fluid runs over. You won’t get any air in the system so you won’t have to bleed them. Good luck and enjoy👍
@@TrucciSpeed thank you so much !
Very welcome👍
What are those wheel studs he is using to assist put the wheel on???
I will check with George and get back to you.
Thank you. Those look like neat tools to add to my box.
Had a great time!
Me too! Happy to have you back home.
Thanks to Chris, George, and Dominic for the help with the Corsa Pipe... Good, relaxing video to watch...
It was fun👍🏼
@@TrucciSpeeddid you guys replace the caliper bolts?
@emanuelornelas5537 no we did not replace the caliper bolts.
@@TrucciSpeed aren't they one time use? Reason I ask is because I'm changing my pads to these today. Any issues with keeping OEM ones?
No there is no problem reissuing them. Just torque to factory specifications