Thanks for the info. I to thought I had a defective controller because it didn't spin when turning the throttle. I was unaware that it had to be kick started. Bought a new controller because of it. Wish I had known before hand and saved money. I'll be wiser next time round thanks to you folks.
Hell yeah guys. I found 2 e150 scooters in the trash. Batteries were dead so first I bought a charger for $8 off Amazon and rechecked. I checked the ebc on both and one was good. I took the good ebc and put it in the one with the good batteries, pulled the throttle and nothing, spun the wheel and nothing again. I bypassed the motor and it worked. I then saw this video and put a paper clip in the brake switch and the damn scooter runs great. 2 scooters for $8. Not bad. Thanks for your expertise.
Thanks so much for your video. Wish i saw it eariler. After buying batteries, controler, and throttle, I was about to throw it in the garbage! Things you do for your grandbaby!!!!!!!
what voltage will it take could i switch the batteries for 36vdc?...... 2x 18v @ 5Ah lion packs half the weight and size? any help is appreciated cheers
Awesome video, you guys save me money, I was just about to buy another controller module for $ 25 because I just heard a click but after saw your video works Thank you very much guys.
Thanks for this. Other videos mention it needs a spin to get it going but no-one else mentions it needs to be a fast spin. So far I have replaced the batteries and the controller, everything seems ok but it does not work. Will now try this, thanks.
First time razor scooter user, these things are downright dangerous you twist the throttle and instantly the thing so shoots off the line not safe for five year olds! Why the hell can’t they design these things better from the get-go. What are my options here, I’d like to remove the twist throttle and just have a button as when your jet it forward your cleaning on for dear life hence having the throttle full open! The thumb operated button might be easier I’m talking for a five-year-old here!
@@JacanaProductions Hey Jacana, not true. They do exactly the opposite...they WILL NOT shoot off the line! They only engage if your allready moving....you need to kick off to get the electric motor to engage. If yours is not doing this its broken, contact a dealer!
@@johnf1353 Not true with old Razors with lead acid batteries, they shoot off the line and have no kick off function. Not a problem if you can get used to it - we got our razors for free from a neighbor.
I just picked up a E125 for $13 at GW, turns out it works great. Thanks for explaining the "initial safety push". Without that info, I would have started to throw parts at it.
I have the E100 Glow. I found a tutorial on how to solder a jumper on the board to bypass the kickstart relay - but it was for the E100, not E100 glow. Is there a way to tel which relay is for the kickstart so I can solder in a bypass?
I'm having problem with my scooter it was working fine then all of a sudden is it not go fast it said that its charge there's a green light and when I put the brake on the wheel goes fast and start spinning but then when I'm on it it barely goes like a dead battery but the battery is charged can someone help me with this problem
Is there a way to bypass that feature. I have an inmotion scooterboard that is the same way, have to move it for power to go to motor. I am trying to hook up a thumb throttle to it, since the original broke, but can't figure out which wires go where. The thumb part black, Red and white I got, but not sure about the rest of the wires.
My do the saint thing only click don't stared it check battery one go 1278 the other one got 12.57 put stared it the 1257 stared go down to like 12.53 take the botton aut got up to 12.57 again you thing battery no good the other one got like 12.76 And go back to 1276 don't now what can be problem you got any links can check all the cable see one no good o the realay do the noise thank you video
I've tester my battery is was right under thirteen so that was good I hooked up a jumper to the motor so I know it ain't the motor. My biggest issue is I hear no click! would that be a relay in the throttle? This thing powers on but don't budge its a e100
I replaced the battery and control box, checked all points that you showed and motor is working with direct connection to battery. 100% checked but the connector from controller to motor don't have power with throttle. help!
Hi I just came across your video I have the scooter which used to work perfectly however when I turn it on now it goes by itself without me touching the throttle so how do I get it do the scooter only goes when I pull the throttle
My daughter managed to snap the throttle cable in half, it has 2 orange and 2 brown wires...are they specific to each wire or can i just reattach them to either orange to orange and brown to brown?
Hi. Can you estimate the cost for Control Module Razor E200, E300 , to shipping in UE zone ? Also, what type off controller is that from the test ? Seems to be much smaller then the one I see on your site. My plan, is to put the MY1016 on bicycle, using the simplest and cheapest mode. Thanks.
Hello, i just came across your video and wanted to ask, do you have any idea of how the throttle control works? It has 3 wires so i'm thinking maybe PMW? I'm doing a little project and i need to replace it by something of my own so i need to recreate the signal the throttle control sends. Thanks in advanced!
@@WildPowerSports So is there any kind of way to bypass this 5 V hall sensor so that any time you hit the throttle no matter if the wheel is turning or not it will go?
Good information! Is there anything tricky like this with the crazy cart control module? My son's razor drifter quick working after about 10 days. Battery indicator on throttle would switch from full to low and not work. Eventually the controller just started clicking. Razor sent a new controller and its the same thing. Thanks!
O:12+ I have a razor Pocket mod I charged it up and at the same time it would not move forward but I did have a clicking sound before I charge it up completely now I do not have the clicking sound nor will the razor Pocket mod will not move at all period but the on and off button shows as an indication that I'm getting power to my batteries so how can I fix this problem
Great video guys! Super helpful but I'm still stuck. I replaced the controller and have good batteries. I have no click in the controller so what now? Replace the throttle and cable?
Side note: throttle shows continuity when I turn the throttle on orange wires only, no continuity on brown wires. Any advice would be greatly appreciated!!!
Hi bought the controller and extra batteries from Amazon just in case, but I still can't hear the click, I already check the break circuit and tested it, the motor does work when I connect it directly to the battery, I don't what else to test - is it possible that the replacement module that I got is not good? anything else I can check? Thank You
I have already tried with two new controllers and it doesn't even "click" new batteries, new throttle, new relay I just need to change the motor,but if I put it directly from the batteries it works properly. what would be the problem?
I was given a e175 razor scooter and I think the motor dear on it..when I hit the throttle the box dont click so I disconnected the battery and it do click. I also plug the mother in the jumpers where the batteries go into b4 the relay box + - and still the motor don't turn even when I give alil hand spin..is the motor dear or IAM missing something..
Ok I have a E300 razor I bought new battery. The problem Im having is it not getting the full 24V to the motor. I tested the power to the motors and it goes for 3.5V to 24V for a sec. then drop under 3.5V run very slow but still 24V coming out Batt? Does that mean that the control speed by module needs to be changed?
Hi I've put the voltage the wrong way round in the power input and heard a click pop what part would it be it's a razor E100s model number ZK2400-DP-LD-ROHS. 24v make date 2013/09/30. Please can you help me I would be so grateful.
I took all that off a scooter to put on a mini bike for it not to work until I realized it need a push. I took it all off and just got a 24v to negate all that crap
For a razor 350 dirt bike I plugged it in to charge for 12 hrs but the green light is only blinking on the wall charger and the switch doesn’t turn on when turned on anyone knows what’s wrong 🤙🤙
just bought e100 charge batteries but won't move check all connection , motor no luck almost give up . Thanks for the great video hopeful share to the other
Hey guys, do you have any tips and tricks to overvolt a e100 to 40watts? I did it and it works great for about 1 and half minutes then shuts down. I let it cool off for a bit then can go at it again. Any help?
@@WildPowerSports Yes you are absolutely correct. I wanted to see what the limits are on this inexpensive second hand scooter I picked up. Test, fail, change, test again........
Hi got one my son it no runing do that it still no runing che power put on work do cable can hert noise clicks dont run how many charge be battery 12 sonthing i check all the cable with my testes ligth and see power any cable work dont no thing botton recet no work You Now how much cost cable to cheger battery the name where can got 2 battery thing it thad thank s much you video
hi i just got a razor e100 my uncle had stored away the brake handle was removed and the red and black wire to the brake was cut what should i do? i got good batteries but i dont hear the click from the box any help
Can I add this function (where you need to kick the scooter in order the motor to start running) to Razor e300? I assume this function will keep the motor in good shape longer. What controller do I need for E300? Thank you.
How many watts is an e 100 motor "good" for ? I'm gutting a trash find unit at putting a 1000 watt 48 volt controller and lipo battery in it we'll see. Want to keep it stock appearing and still push my 250lb ass around to keep up with my 3 yr olds over clocked 6-12volt John Deere gator. I want to fuse the motor for max ish current so I don't burn it up too quick. www.amazon.com/48V-60V-1000W-Controller-Bicycle-Scooter/dp/B00WBB07QI
Thanks for the info. I to thought I had a defective controller because it didn't spin when turning the throttle. I was unaware that it had to be kick started. Bought a new controller because of it. Wish I had known before hand and saved money. I'll be wiser next time round thanks to you folks.
lol just did the same...
Hell yeah guys. I found 2 e150 scooters in the trash. Batteries were dead so first I bought a charger for $8 off Amazon and rechecked. I checked the ebc on both and one was good. I took the good ebc and put it in the one with the good batteries, pulled the throttle and nothing, spun the wheel and nothing again. I bypassed the motor and it worked. I then saw this video and put a paper clip in the brake switch and the damn scooter runs great. 2 scooters for $8. Not bad. Thanks for your expertise.
So how can this kick off to throttle action be bypassed. I want pure, full throttle control.
Thanks so much for your video. Wish i saw it eariler. After buying batteries, controler, and throttle, I was about to throw it in the garbage! Things you do for your grandbaby!!!!!!!
Is there a controller that does not need the wheels to be turning? Thanks
West Coast wasn’t expecting to hear your name drop that was cool videos OK to.
what voltage will it take could i switch the batteries for 36vdc?...... 2x 18v @ 5Ah lion packs half the weight and size? any help is appreciated cheers
Also interested in this question
thank you so much for the info i am trying to make an electric bike out of the scoter e100 parts you just helped me alott
Awesome video, you guys save me money, I was just about to buy another controller module for $ 25 because I just heard a click but after saw your video works
Thank you very much guys.
Thanks for this. Other videos mention it needs a spin to get it going but no-one else mentions it needs to be a fast spin. So far I have replaced the batteries and the controller, everything seems ok but it does not work. Will now try this, thanks.
Kudos to you guys, easy to understand, I was about to start ordering parts you save me some money. thank you
Thanks! We love selling parts but dont want anyone to buy parts they dont need!
Thank you for explaining the controller functions, I was just about to send mine back.
First time razor scooter user, these things are downright dangerous you twist the throttle and instantly the thing so shoots off the line not safe for five year olds! Why the hell can’t they design these things better from the get-go. What are my options here, I’d like to remove the twist throttle and just have a button as when your jet it forward your cleaning on for dear life hence having the throttle full open! The thumb operated button might be easier I’m talking for a five-year-old here!
@@JacanaProductions Hey Jacana, not true. They do exactly the opposite...they WILL NOT shoot off the line! They only engage if your allready moving....you need to kick off to get the electric motor to engage. If yours is not doing this its broken, contact a dealer!
@@johnf1353 Not true with old Razors with lead acid batteries, they shoot off the line and have no kick off function. Not a problem if you can get used to it - we got our razors for free from a neighbor.
I just picked up a E125 for $13 at GW, turns out it works great. Thanks for explaining the "initial safety push". Without that info, I would have started to throw parts at it.
Thanks for the video, do you know how the controller knows the wheel is turning , does the controller get a feedback current from the motor?
Thanks for the explanation guys 👍
I have the E100 Glow. I found a tutorial on how to solder a jumper on the board to bypass the kickstart relay - but it was for the E100, not E100 glow. Is there a way to tel which relay is for the kickstart so I can solder in a bypass?
Never did this one, but im sure it would be similar
Can you link this tutorial?
I'm having problem with my scooter it was working fine then all of a sudden is it not go fast it said that its charge there's a green light and when I put the brake on the wheel goes fast and start spinning but then when I'm on it it barely goes like a dead battery but the battery is charged can someone help me with this problem
Is there a way to bypass that feature. I have an inmotion scooterboard that is the same way, have to move it for power to go to motor. I am trying to hook up a thumb throttle to it, since the original broke, but can't figure out which wires go where. The thumb part black, Red and white I got, but not sure about the rest of the wires.
You just saved me a ton of time , thanks .
My do the saint thing only click don't stared it check battery one go 1278 the other one got 12.57 put stared it the 1257 stared go down to like 12.53 take the botton aut got up to 12.57 again you thing battery no good the other one got like 12.76 And go back to 1276 don't now what can be problem you got any links can check all the cable see one no good o the realay do the noise thank you video
I've tester my battery is was right under thirteen so that was good I hooked up a jumper to the motor so I know it ain't the motor. My biggest issue is I hear no click! would that be a relay in the throttle? This thing powers on but don't budge its a e100
im from Phillipines how can i avail the for my Razor 360 i need to replace it
Is there an option to make the e100 like the e200 were there's no need to push of ??
Different controller
What one does start by itself
I have hacked mine and mine goes as soon as I twist but I have also hacked my controller so it flows more amps
I replaced the battery and control box, checked all points that you showed and motor is working with direct connection to battery. 100% checked but the connector from controller to motor don't have power with throttle. help!
working on e300 our razor wheel spins but will not pull once weight is on. do you think motor burnt up?
I can't find the right 12v e100 controller model B-Zk1200DH-LD version Vo1 no where
What is the resistance on the motor
Great video! I thought my controller was bad and was going to replace. Glad I found your video. Tks
Hi I just came across your video I have the scooter which used to work perfectly however when I turn it on now it goes by itself without me touching the throttle so how do I get it do the scooter only goes when I pull the throttle
My daughter managed to snap the throttle cable in half, it has 2 orange and 2 brown wires...are they specific to each wire or can i just reattach them to either orange to orange and brown to brown?
Hi.
Can you estimate the cost for Control Module Razor E200, E300 , to shipping in UE zone ?
Also, what type off controller is that from the test ?
Seems to be much smaller then the one I see on your site.
My plan, is to put the MY1016 on bicycle, using the simplest and cheapest mode.
Thanks.
Thanks guys we are glad it helped you! Anything you need you can always find at our site, WildScooterParts.com
Is there anything i can do or bypass in the controller to make it faster? Much appreciated. Thanks
Yes, but it entails a lot of work. Bigger motor, batteries, controller, etc.
Do you know how can i run a mosfet irfz44n with this throttel?
Thank you so much it really helped
Hello, i just came across your video and wanted to ask, do you have any idea of how the throttle control works? It has 3 wires so i'm thinking maybe PMW? I'm doing a little project and i need to replace it by something of my own so i need to recreate the signal the throttle control sends. Thanks in advanced!
Not PWM, its very simple. The throttle simply uses a 5v hall sensor.
@@WildPowerSports Thank you so much!!
@@WildPowerSports So is there any kind of way to bypass this 5 V hall sensor so that any time you hit the throttle no matter if the wheel is turning or not it will go?
Thanks guys very helpful.
I still dont understand this: before a boost is given will i messure 24 volt at the output of the controller?
What do you mean "A Boost"?
My throttle not clicking u think I need replacement
Good information! Is there anything tricky like this with the crazy cart control module? My son's razor drifter quick working after about 10 days. Battery indicator on throttle would switch from full to low and not work. Eventually the controller just started clicking. Razor sent a new controller and its the same thing. Thanks!
Sounds like bad batteries, in fact from what you said we are almost sure of it. Watch our phantom voltage video!
my e100 oly clicks when plugged it to charger. does this mean the batteries are no good?
I have the same problem
my sons scooter won't run when u stand on it but will of u hold it up off ground help me please i bought new batts and charger
Lea Newton sounds like it needs a motor
O:12+ I have a razor Pocket mod I charged it up and at the same time it would not move forward but I did have a clicking sound before I charge it up completely now I do not have the clicking sound nor will the razor Pocket mod will not move at all period but the on and off button shows as an indication that I'm getting power to my batteries so how can I fix this problem
Can you please help me
What is the p/n of the biggest motor i can install on my E200 without having to make any major mods ? ( old motor out and new motor in )
No such thing, any larger motor will require mods.
two words kick to move
Great video guys! Super helpful but I'm still stuck. I replaced the controller and have good batteries. I have no click in the controller so what now? Replace the throttle and cable?
Side note: throttle shows continuity when I turn the throttle on orange wires only, no continuity on brown wires. Any advice would be greatly appreciated!!!
@@EarthAngelFire777 I have the same issue, any updates?
Hi bought the controller and extra batteries from Amazon just in case, but I still can't hear the click, I already check the break circuit and tested it, the motor does work when I connect it directly to the battery, I don't what else to test - is it possible that the replacement module that I got is not good? anything else I can check? Thank You
Please watch the Off Scooter Testing video we posted. It goes through EVERYTHING
Do you have a kit to run 2 motors at Sametime and start up with out having to push off make in to go cart
No need for a kit. Simply use 2 controllers and wire them to the same throttle.
I have already tried with two new controllers and it doesn't even "click" new batteries, new throttle, new relay I just need to change the motor,but if I put it directly from the batteries it works properly.
what would be the problem?
Wiring, connectors, or power switch. Try bypassing power switch. Also, where did you get the batteries?
Do you sell a variable throttle set up for a hypr350 thanks!!
Yes! Just use our Standard Variable Speed Kit for Razor, it will work good on that bike also, since its a similar setup. wildscooterparts.com
I was given a e175 razor scooter and I think the motor dear on it..when I hit the throttle the box dont click so I disconnected the battery and it do click. I also plug the mother in the jumpers where the batteries go into b4 the relay box + - and still the motor don't turn even when I give alil hand spin..is the motor dear or IAM missing something..
Please watch the off-scooter testing video!
Bro tienes este video pero en español, me interesa saber , yo tengo una razón 350 y no me funciona
Thanks for that info😌🙏
What about for the eco smart?
Please watch our E200/E300 video, the eco smart works the same way...
If you turn the switch on and twist the throttle and there is no click from the controller is that most likely the controller is faulty?
Could be either...
@@WildPowerSports it actually worked once i kicked it but does not click
Ok I have a E300 razor I bought new battery. The problem Im having is it not getting the full 24V to the motor. I tested the power to the motors and it goes for 3.5V to 24V for a sec. then drop under 3.5V run very slow but still 24V coming out Batt? Does that mean that the control speed by module needs to be changed?
mm
Thank you! I spent a long time trying to “fix” but it was fully operational 🤔
Why the long face?
Hi I've put the voltage the wrong way round in the power input and heard a click pop what part would it be it's a razor E100s model number ZK2400-DP-LD-ROHS. 24v make date 2013/09/30.
Please can you help me I would be so grateful.
Usually that will fry the module. For a replacement head to wildscooterparts.com
I took all that off a scooter to put on a mini bike for it not to work until I realized it need a push. I took it all off and just got a 24v to negate all that crap
Is the e175 the same?
Yes
If there is no click do I need a new volt controller or throttle????
Could be either...
Is it the same for the razor e300?
No, different video...works way different.
For a razor 350 dirt bike I plugged it in to charge for 12 hrs but the green light is only blinking on the wall charger and the switch doesn’t turn on when turned on anyone knows what’s wrong 🤙🤙
Como pueden arreglarme un patin
just bought e100 charge batteries but won't move check all connection , motor no luck almost give up . Thanks for the great video hopeful share to the other
Hey guys, do you have any tips and tricks to overvolt a e100 to 40watts? I did it and it works great for about 1 and half minutes then shuts down. I let it cool off for a bit then can go at it again. Any help?
Thats why you dont "overvolt". You change controller and throttle to the correct voltage.
@@WildPowerSports Yes you are absolutely correct. I wanted to see what the limits are on this inexpensive second hand scooter I picked up. Test, fail, change, test again........
Can the e100 controller be used in a e300 scooter?
No, totally different.
You can use a drill to simulate the kick off. Just open the chuck all the way up and put it directly on the drive shaft. Take the sprocket off first.
Hi got one my son it no runing do that it still no runing che power put on work do cable can hert noise clicks dont run how many charge be battery 12 sonthing i check all the cable with my testes ligth and see power any cable work dont no thing botton recet no work You Now how much cost cable to cheger battery the name where can got 2 battery thing it thad thank s much you video
hi i just got a razor e100 my uncle had stored away the brake handle was removed and the red and black wire to the brake was cut what should i do? i got good batteries but i dont hear the click from the box any help
Mi patineta no me funciona la pongo acargar y sale la luz cerde pero no me funciona quiciera saver cual es el problema
Erika Cebteno una o Las dos baterias estan malas
How do you disable the push assist and use throttle only? -
change the motor out, it's a design with the motor itself
patrick batemon wich motor can i get to change it out with so you sell one if so how much are they
There must be a way to modify the motor to eliminate the minimum speed switch.
Hola! ¿Se puede bajar o controlar la velocidad de razor power core E100 scooter eléctrico?
Grandson went through a water puddle now it won't run what can I do to fix it
Replace controller...this is common when it gets wet.
I need help my scooter won't run
Watch the videos, then order the parts.
Can I use 230v ac motor for my cycle transform to electriccycle
That would be one fast machine!!! You will most likley require an AC Induction controller, big $$$$
the rest button is broken how do I fix
Replacing it wouldnt be a bad idea? =)
Can I add this function (where you need to kick the scooter in order the motor to start running) to Razor e300? I assume this function will keep the motor in good shape longer. What controller do I need for E300? Thank you.
Just develop a habit of rolling before turning the throttle on.
How many watts is an e 100 motor "good" for ? I'm gutting a trash find unit at putting a 1000 watt 48 volt controller and lipo battery in it we'll see. Want to keep it stock appearing and still push my 250lb ass around to keep up with my 3 yr olds over clocked 6-12volt John Deere gator.
I want to fuse the motor for max ish current so I don't burn it up too quick.
www.amazon.com/48V-60V-1000W-Controller-Bicycle-Scooter/dp/B00WBB07QI
I have dirt bike , only souns Click
The E125 works the same way
ty
Tha sain recter are no good the Racer no stared it
😂
Sounds all half a$$ed