ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- A look at the razor electric scooter and how the dc motor speed controller works and how to modify it razor e90 e100 e200 e300
get a good speed controller/ motor set up here
amzn.to/3p9RkHt
affiliate link
#e300 #razorscooter #electricscooter
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 69 [ซับไทย]](http://i.ytimg.com/vi/QuodflInQT8/mqdefault.jpg)
Got one of these for my 5 year old, 20£ guy said it just needed charged. Got home done a few tests turns out the board was kaput. Followed your video and done the bypass and it's now flying. Not bad for 20£. I was about to wire in my own relay then found this way much easier. Thanks a lot. I've no charger for it so hopefully it will still charge through the port whenever I get hold of one cheers buddy..
I found an E90 in a dumster today with a cracked battery. I was looking for a way to test it out with a benchtop power supply. Your bypass idea was great and was perfect for allowing me to test it out, it worked! Thank you!
*Came in today and my friend and I both rode **Latest.Bike** Scooter around for about an hour. Was lots of fun and didn't drain the battery much at all!*
Just did this today, worked like aa charm! I got an e90 out the trash, building a 24v cell to get some run time out of it. HOWEVER.. You can mix up two connections and as soon as you flip the switch it runs wild! Lol other than that good show!
Great if controller circuit knackered but as it is for an 8 year old, the brake switch will now have no effect on cutting out motor. Great stuff though 👍 my issue is no power when button pressed, turns out the relay isn't getting the ground , so like you I gave it a hard ground and the positive side of coil now has the yellow wire going to it, that way the button does the job and the foot pedal switch.
Thank God for people like you. Saved me at least a few days just testing to find the right process to bypass that stupid 3-5v "safety start".
good video helpful i found just using the black wire short works fine off the button did not need to move the yellow wires could be luck on my part but thanks
Mine work start so will be doing this , nice 1
The kickstart feature on this scooter I think is dangerous. As your kids got one leg behind, the power kicks in at full power and sends them flying. It's a decent basic scooter but I think I'll be changing the speed controller for an actual normal speed controller with a real thumb throttle n if I get carried away, change the batteries for lipo to make it lighter and increase the range. I love to get a cheap one and make it better than just go out and buy an expensive one. Especially if u get a 2nd hand cheap one or find a broken one. They are so simple to work on.
It's really not a bad idea for a kickstart. If for whatever reason you are walking and hit the twist throttle, the scooter won't go on while you're holding on
@@OldManPhil Do you pushstart your car every stop sign, just in case you accidentally smash your foot down on the accelerator and crash into someone?
@@PowerScissor No, that is different. I think the push start is a good idea because it has happened to me where I was walking my scooter out of the garage fast and it activated. It is a think fast moment and you have to run up and jump on (High risk) or drop it (Damaging). It would of happened to me more if there was no kick start. A car is just a stupid example btw.
Great video just use larger gage wire for powering the motor otherwise it might melt
*Easy to setup and maintain.*
Ok i did exactly what you did but now the scooter goes full throttle as soon as you turn the pa power on. What did i do wrong
I got the same little black one, just mine is blue and different brand, been trying to mod that thing for a while now lol
Can you maybe do one for the little black one too?
@@liquidsudagaming4974 I have done another video with the other scooters speed controller.
Great video,very helpful!!!
i guess it is kind of off topic but does anyone know a good website to stream new tv shows online?
@Yusuf Baker i watch on FlixZone. Just google for it =)
@Emmett Bo yup, I have been watching on flixzone for years myself :)
@Emmett Bo Thank you, signed up and it seems to work =) I really appreciate it!
@Yusuf Baker Glad I could help :)
Well, I just did exactly what you did now the motor comes on as soon as I connect the battery, speed switch is no longer functional.
My input up to the starter knob, it has 4 wires 2 orange 2 brown, its an e150 should i connect orange where uour yellow is? Anybody help pls i have limited time my yellow wires are to the brakes idk what to do HELP ASAP
How do I just bypass and make it faster is that the black cable? Adding more voltage right
I can not here any clicking from the relay on my e100 but as i said below the light switch on off switch lights up red, could this be lack of charge its been stood and was working and must hold charge as 8 months no charge it still lights up and it has been used a very few time his little one did not like it, any feed back i would be great full.
So helpful, Thank you!
I do have a question. If I have a 20v battery hooked up with the way you have this controller, Should the leads to my motor read 12volts, or 20volts? In other words, Does the controller bring the volts down to 12, or does it keep it at 20 without burning up the motor?
I have got the razor 100 with the trottle turn swich on the handle bar, i switch it on the light come on red, i have tryd the push start but nothing, could it be there is not enough power in the battery as i am waiting on a charger, i thought it would still start even the battery is low.
Can one just take the speed controller out, or is it needed?
Question! Can we get the Razor Sonic Glow Electric Scooter (USA) to go faster? I got my son one for Xmas and one of his friends parent's got their son a "freaging SEGWAY! scooter" and his friend's scooter goes 30mph and SMOKES his fancy light-up scooter. He's getting frustrated getting left behind. I can't afford a Segway scooter for my 9 year old right now! I have 2 adult daughters I'm trying to help get their first cars and even used car prices are through the roof right now! PLEASE HELP ME if it can be done!
Any more details would be appreciated
I've got an E100 scooter, seems to have the exact same control board, however when joining the same 2 as you I still get clicking from the relay. Any ideas?
The relay clicks are supposed to happen. That's the feed for the motor power.
@@FINDITFIXITRESTOREITBUILDIT Thanks for the info, any tips on bypassing then?
@@kennywatson249 you don't want to bypass it. Its turning the motor on when you push the button.
Hi, I'm trying to bypass the kickstart feature. Is that done with the black wire shown in the video? What are the other 2 thin yellow wires for? (I'm trying to make it like in the video where you can press the button and it will automatically run the motors without having to manually speed it up first via kickstart in order to activate) I have the e90.
Wire it like I show at 7:39 that will fix that.
@@MADMODS The yellow wires are cut from the 2 small ports on the back right? Also, I notice the yellow wires are connected to red and black (+ and - I'm assuming) which color goes where? I can't tell looking at 7:39 because both are yellow
Ok so it doesn't matter what way round the yellow wires go as it's just a switch. The relay on the board is a electro magnet switch and what we want to do is turn that switch on to get power from the battery to the motor. The relay 4 connections 2 are for the motor switch the thick wires and 2 for the electro magnetic switch thin wires (theses are our yellow wires) because there for the switch it doesn't matter what way round we connect them.you want one yellow end connected to positive or negative it doesn't matter other yellow wire end on the relays electro magnet terminal then the other terminal needs to connect to the opsitate negitave or positive to the other end. I really hope I'm making sence to you if your still stuck Google relays and get a bit of info on them basically you are using the push switch to supply a power feed the a coil in the relay witch then switches a big switch in the relay that then puts power to the motor.
Btw I like your profile picture and wonder if you scam scammers? If that doesn't make sense to you let me know and il keep helping you till you make it work 👍
@@MADMODS I don't scam scammers? Lol. But thank you for the lengthy response! I hope I can get it to work.
Check this out and you can see why I asked th-cam.com/video/PHli3h-zhcU/w-d-xo.html
Is it really just a cheapo electric bike controller? If that's true, I should be able to slap the whole setup from it onto one of my bikes. Thinking about it, the parts on the older model do look like cheap electric bike parts from Ebay, the kind of stuff I've considered buying.
How do you mod a m365 scooter controller for m365 essential?
Can you use a 12v motorcycle battery to run one of these? Or would i need to modify something?
you can and it would be fine as there already 12volt.
Would it be possible to get say an e200 speed controller and throttle as well as batteries and install it on an E90 to overvolt the pre-existing motor????
Not a bad idea 💡
@@newzealandhoris4208 Ayee :))
You gotta start pushing before it kicks I
That doesn't look like the e100 or e90 I see on Amazon is it because I'm looking at the power core model? I want to do a major upgrade to speed and range but idk how possible it is.
Seems the power core version uses the same "speed controller", but different drive motor setup is the difference between them
dude.....Rule of thumb... give a brief overview of your video and get to the point. Use video editing to cut out all the extra nonsense. It's been 8 minutes and I havn't seen you get to action yet! This should have been titled "speed controller mods and bypass THEORY"....
Bro chill out man if you dont like it, skip ahead or leave
Man I thought it was just me being a dick with the same complaint.
me2
I got an e90 charging but stopped working..not sure of fault but think it's the go button. Found an e100 with throttle and brake was wondering if I could switch the throttle onto the e90 but the e100 has a cable from brake aswell going to loom is that just a e brake so to speak
yes you can there the same speed controller and its just a switch to stop the motor when you pull the brake.
You tink you wheree be compiny
You are the worst! On & on! Get to the point & be done with it my brother. Then again it's probably me having a patients problem. I take it back & apologize mate. Turns out I'm just a bit of an asshole.
😂😂🤣🤣
Shut the damn TV off in the background next time, super annoying
Lol ok I've got better with things like that now.
Bro chill tf out
This is a terrible idea, unless you want full power immediately and no finesse. The relay is PWM modulated (pulsed) to regulate the speed..