How to do a front end alignment on a utv,atv or sxs

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024
  • jbsperformance.com

ความคิดเห็น • 36

  • @travisi7887
    @travisi7887 3 ปีที่แล้ว +4

    Same way we do it. I use a set of bearing turn plates for the front tires to make sure the tire doesn’t bind on the concrete

  • @outdoorzone
    @outdoorzone 3 ปีที่แล้ว +7

    Just measure center line on the front and back of front tires! Get it within 1/8”-1/4” depending if you need toe in or toe out!

    • @WVHotRodRhino
      @WVHotRodRhino  9 หลายเดือนก่อน +1

      I prefer this method

  • @frankashby6235
    @frankashby6235 2 ปีที่แล้ว +8

    I really don't understand what you are doing on the rear tire. It would be very beneficial to get the cameraman do some up close footage and go into a bit more detail

  • @VegasRobzilla
    @VegasRobzilla 7 หลายเดือนก่อน

    I watched your video a couple of times and now I see what you are doing,I'm gonna try this tonight,on the passenger side my jam nut is incredibly tight which way do you rotate it to break it free maybe I'm going the wrong way,thanks.

  • @cptbuiltk7944
    @cptbuiltk7944 2 ปีที่แล้ว

    Just did super ATV arms on my krx, perfect video!

  • @frankashby6235
    @frankashby6235 2 ปีที่แล้ว +4

    What on Earth are you measuring in the rear??

  • @donaldbillings1693
    @donaldbillings1693 4 หลายเดือนก่อน

    My car (2021 Polaris Turbo S) pulls slightly to the right. I used your method over the weekend to check. It's right on, not to sure what the next step is.

  • @Keepnthem
    @Keepnthem 2 ปีที่แล้ว +3

    Can i get a close up please?

  • @stormtwincam
    @stormtwincam 3 ปีที่แล้ว +1

    thank you, I needed this.

  • @MadDog-rg7xs
    @MadDog-rg7xs 2 ปีที่แล้ว

    Have you ever had an issue with the camber, I’ve noticed there isn’t any adjustments on the upper radius rods?
    I noticed you have the super Atv on the front, does that help the camber?

  • @The.Real.Timmii
    @The.Real.Timmii 3 ปีที่แล้ว +3

    You gonna update this every ten years? :)

  • @pupbiking
    @pupbiking 3 ปีที่แล้ว +2

    i usually lock steering wheel so it dont move with bungie straps

  • @freedomliberty8944
    @freedomliberty8944 24 วันที่ผ่านมา

    Would a big ass level do the same job!

  • @whiterhinooutdoors4572
    @whiterhinooutdoors4572 3 ปีที่แล้ว +4

    Yeah my steering wheel is turned to the right when I should be going straight hope this fixes it

  • @alancrist6168
    @alancrist6168 27 วันที่ผ่านมา

    Never said what position the stereo was in first

  • @AndyCrumbaker
    @AndyCrumbaker 3 ปีที่แล้ว

    I’ve got a ‘21 pioneer 1000 with the factory wheels and tires on it. 27x9x14 in the front and 27x11x14 in the back. Will this string method still work? Only 200 miles on it and the right front tire is getting eat up much worse than the left.

    • @redemptiverevelation
      @redemptiverevelation 9 หลายเดือนก่อน

      Honda 4x4 calls for 3/8 inch toe out with a decent tolerance for variance

  • @BrainwashedTelevision
    @BrainwashedTelevision 3 ปีที่แล้ว

    When you move one side does the other side move ?

  • @anthonybadillo8343
    @anthonybadillo8343 2 ปีที่แล้ว +1

    what wrench did you use to loose it up ?

  • @detroitdeb
    @detroitdeb 3 ปีที่แล้ว +1

    Did you loosen anything before you adjusted ?????

    • @WVHotRodRhino
      @WVHotRodRhino  3 ปีที่แล้ว +5

      the lock nuts on the tie rods

  • @rogerpeters2671
    @rogerpeters2671 หลายเดือนก่อน

    You need to show what you’re doing in the back we have no idea

  • @brentdimitry16
    @brentdimitry16 8 หลายเดือนก่อน +1

    He just aligned his string , just put it wherever you want it. Lol.

    • @WVHotRodRhino
      @WVHotRodRhino  8 หลายเดือนก่อน

      You probably need to watch again since you didn't understand it.. 😂

    • @mikerayle6103
      @mikerayle6103 6 หลายเดือนก่อน

      ​@@WVHotRodRhino this method can get you close I've done it on several vehicles I've owned. What he needs is 2 pieces of angle iron with holes drilled for diagonal studs and measure front and back of the angle iron the farther the pieces stick out past hub/wheel size the better. The string gives too much

  • @mikec082
    @mikec082 3 ปีที่แล้ว +4

    What are you adjusting

  • @rickhorne482
    @rickhorne482 3 ปีที่แล้ว

    Helpful! Thanks!

  • @scottrevert5368
    @scottrevert5368 3 ปีที่แล้ว

    Must have changed the radius rods too. This method would not work on the factory radius rods, because the rear tires are towed in considerably.

  • @coachkennedy6424
    @coachkennedy6424 9 หลายเดือนก่อน

    Looks like he is doing a string adjustment rather than a wheel adjustment. IDK. Maybe it is just me.

    • @WVHotRodRhino
      @WVHotRodRhino  9 หลายเดือนก่อน

      Yeah..it's just you

    • @brentdimitry16
      @brentdimitry16 8 หลายเดือนก่อน

      That’s what I was yelling at him( you are doing a alignment on the string, not your car buddy) he shouldn’t be moving the string at all

    • @WVHotRodRhino
      @WVHotRodRhino  8 หลายเดือนก่อน

      @@brentdimitry16 you align the string with the rear wheel and then adjust the front....