DIY replacing rear 4x6 speakers on a 88-94 c1500 chevy truck gmc sierra/silverado
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- I replaced my original rear b pillar 4x6 speakers with some pioneer ts-g460 4x6 as well as the front ones in the dash the people saying its to hard of a job or its not worth doing are completely wrong the difference is night and day and the plastics will not break if you just take your time and have a feel for them i rushed my last video on this issue hopefully this was better explained thanks and subscribe!!
![[TH] VALORANT Champions Seoul - Grand Final - EDG vs TH](http://i.ytimg.com/vi/WvObMc9VelI/mqdefault.jpg)
Thank you, took me a long time to find an actual video that wasn't an extended cab which is totally different. See, six years later and still help, cheers.
Still helping people 6 years later, thanks
Thanks Buddy, I have a 1992 GMC that needs these same speakers replaced! You really explained it good! I have been chicken to do it because I didn’t want to break the plastic trim, but now I’ll try it! 👍🏻😜
People... don't be discouraged when you hear someone say "this is hard" or "it's too much work." Instead, consider the source.
The way to think about it is.
"People do this, I can do this."
Thanks for putting out a great video on this subject! Great job detailing what's needed for the job and how to do it! Especially for people like me who want to do this job the right way and not the cheap, easy way!
I have a 05 Chevy Silverado same problem speakers in the same area have to be replaced.thanks for your help and confidence
yes sir your welcome thats what this channel is about its the same steps essentially for a 05 silverado
or you could just cut the factory speaker grill out and self tap a new grill on so you can easily swap them out at any point
Lmao that would also work 😂
Good shit bro. I’m riding with one speaker rn so I need to do this soon. 93 Chevy 5.7
Same bro😂😂
Same here
92
Same. 99 Crew Cab.
But no videos on my truck. 😒
Ty i wish I could buy u a beer
I have a 89 Cheyenne so I didn’t get all the extra trim like the most c1500s did I only have a plastic cover on the rear speakers and that’s about it lol I’m trying to get that style of speaker cover that goes from the carpet all the way to the roof and the dome light cover and also the headliner. Hopefully it’s a direct swap. Thanks for the video
Only broke 1 clip but I need to trim some metal to make the Rockfords fit!
Had to disassemble the interior to fix my headliner anyway...
Can't wait to do mine, thanks big dawg 🤘🏼
Thanks man a lot of help, was dreading this tomorrow lol
hopefully it wasn't too difficult if one of the clip stays inside the metal slots of the truck thats completely okay because you can just grab some pliers take it out and slide it back on to the plastic trim piece before you install it the tricky part is trying not to snap the plastics.
Yes I ended up snapping quite a bit of the plastic clips lol but luckily not the outer ones so it doesn't look any different sounds amazing though put some new Sony speakers in all 4 n a new Sony head unit glad I did it haha worth it for sure wayyyyy better than stock from 1990😂😂
@@XxRaWtAwDxX you can try re glueing them back on I did that to my freinds obs truck and it worked out great id give that a shot and if you love the way it sounds now just wait until you install an amp and some subwoofers it will sound even better i have all my 4x6's set to only out put the vocals and the subs take care of all the bass let me know if you would like to diy it i would be glad to help you out i have a new video coming soon thanks for supporting !!
@@limitlesshorsepower4514 Alrighty awesome thanks man! N no problem haha thanks for helpin out
Yes I hear you and am doing that today 12/3/2019 @10:29Am I did the door speakers yesterday it was easy but I know doing the rear panels are not going to be , I Dread doing them but it must be done !!!! Unfortunately Because the old speakers sound like shit the last owner took very good care of the truck , but he didn't take care of the speakers but that's ok ,! I bought the Chevy 2005 Chevy 4x4 from a professional plumber witch had to have the truck ready to go at all hours of the night and weather ! It has some rush . I do dread doing the work Because it's cold out this is Illinois and those who live here in Illinois knows the weather here ( it suck's living in shifty and very crooked state of Illinois ! You all have a good one 😎
My Dad Has A Blue truck with the same Speakers & I always wonder why did the factory Made the front speakers Sound Decent with Bass & Treble & Than Made the Back speakers Sound like Mids with no treble or Bass ?
Be careful with the T50. The proper one is a T47 as it fits down deeper. The T50 only gets to the very top of the bolt and buggers it up it it does not budge. Then again mine were rusted in place. had to heat. The Jack rod has a E torx I believe on it. I used two nuts on mine Jammed it because it was also rusted. I got a better one at the junkyard. Weird you have a screw on that clip. I don't have one. Maybe its why the panels creaked since new. The FORUMS are full of lazy people. So many don't even work on their own truck. You need to be careful in rear speaker selection some barely clear the plastics when installed. I forget what I used back there. Since Then I modified the stock radio and now it has a line in
yeah I found that out with the first pair I bought they were some rockford fosgate 4x6's great quality built speaker but it was too big it didn't clear the plastic so I returned them and got the pioneer ones they work okay I'm getting some kicker panels later for more sound and installing some subwoofers in the truck as well ill do a video on that once I get around to it keep the videos coming man!!
T50 fit like a glove on my 90 c1500
@@XxRaWtAwDxX Its a T47 You can strip it with a T50 It does not go in as deep
@@limitlesshorsepower4514 I know this is 4 years old now but I'm interested in those same Rockford Fosgate P1462 4X6 for the pillars as well as the dash. When you lined them up for the pillars you mention they were to big and didn't clear. Did it seem like it would take a hard time to modify them to fit? I'm also considering the Kicker DSC4604 for ease of installation. But if the Rockford's don't take to much modifying i prefer them. Tell me what you think.
That's why they make sledge hammers.
Its just sheet metal.
Once the trim panel is on, no one knows what it looks like underneath to make it happen. 😳
torx t50
Thank u it did help me out alot !!!
Might have been nice if you would have video it as you took it off.
its a lot easier said then done its hard to get the right angles as your actually doing it but as long as you have some experience with tools and basic install skills you should be okay.
Cleannnn aaah truckkkkk😻🥵
Do you know if there are 4x6 in the 2 dash corners?
Morty yeah they are
@@built_5.76 thanks, bro
Morty no problem.
yes they are swell
Morty yes I have same truck
Where do I find new panels for the back at.tha ones that covers the back speekers i cant find them anywhere
Ya could show the back side of the panels for the viewers to the clip style and arrangement
Where did you get those seatbelt covers that say Chevy on them with a bow tie?
Where did you get the seatbelt covers
I think I'm gonna make a speaker access in mine cut a big square out throw a mesh frame around the square I cut, anybody done anything similar?
💪🏽💪🏽🔥🔥
Is it just a plug and play type of speaker or did you need an adapter for the new speaker? I know on some speakers, it requires a cable adapter in order for it to plug in properly.
i am currently working as a audio tech in most cases you can just cut the original wires, add your new terminals to the ends of the wire connect and re mount your speaker just be sure to check the polarity and your good, this was a simple swap i just cut my original speaker wires added my new terminals that i received along with my speakers re connected my speaker check the polarity re mounted and put everything back together but you can also buy adapters that connect to your original speaker plug and the ends of that connect to your new after market speaker if you don't want to cut your original speaker wires but I just found it easier to cut my wire add my ends and re mount my speakers at the time it all depends on what you prefer really
check out www.crutchfield.com/ISEO-rgbtcspd/ for the harnesses to keep your original wire, they should have what your looking for if you don't want to cut your original speaker wires
I bought my first set of Polk db652 from Crutchfield . Those guys are great.
They included the adapters for FREE.
I even damaged one of them even though I was trying to be careful. When I posted my speaker review on Crutchfield and mentioned it, they sent me an email offering to send me another set for FREE !
I'm much prefer sticking with the adapter pigtail to get a really good connection between your factory wiring and the speaker. I'm not saying twisting two wires together and putting electric tape on them won't work, I just feel better about it.
Unfortunately, when I went back to order a another set of Polk's for the back doors, they were out of stock so I had to order them from Amazon.
Yo is it the same way to snap off on a extended cab
similar but more steps involved I've replaced them on a extended cab as well and you would have to take out the rear seats to assess those rear pillar speakers
What color are the rear speaker cables in a 1989 truck?
I know left rear are brown (+)and yellow ....rear right..dark blue (+) and light blue
Do some more videos like that of obs
Does the 1997 k1500 have 4x6 in rear ?
yes i believe they do as well
What's the name of the clips they're hard to find and often break??
Those General Motors Clips are way overkill. I actually ripped the plastic on the door panel prying with a proper trim tool in the proper location. They're just that bad.
They are available now on amazon.
Grc- 11 is what it says on my bag. I purchased about 30 of them for like $7 .
I might end up using a fair amount of them since I have four doors and I'm replacing speakers, door lock actuators, upgrading door lights to LEDs and replacing exterior and interior handles. Basically a complete rebuild and upgrade on each door. Will probably take multiple passes on some doors as I have to wait for some of the parts.
@@ginakerry2588 can u get a link brother ?
My torx screw at top of seatbelt won’t come out . Helppppp
if I remember correctly it was pretty tight when I went to take mine out maybe try shooting a little bit of wd-40 to loosen it up some make sure you have the correct size torx bit the last thing you want is a stripped or maybe a bigger socket wrench for more torque
It's called a star socket
@victor pearson Well of you're gonna be that guy, i gotta be that too... Its actually Torx bit dummy.
That’s a racket and that’s a Allen wrench see you help us we help you thank you
Rachet*
Torx bit is what they're called
right on brotha I found that out after I looked at the box they came in I bought a set of em off of amazon
It's called a star key or more known as a security bit only when there is a pin in the center
I broke the platic in my 90 Chevy where do I get new plastics at 😂
try LMCtruck.com
Probably a salvage yard
If wanted this kinda explanation i would have read it on a form
no one is stoping you buddy, and its called a forum smart one lol 🤣
limitleSShorsepower I got a 89 obs gmc stepside shortbed too I’m trying to figure out the wiring what color is positive and negative on pillars and the 2 spots on the dash my wires are clipped already and not sure which is which
It sucks this job is a bitch and a half to do in a two door extended cab 91, you gotta take out all the seatbelts cause the plastic runs all the way to the doors lmao
@94 nothing like that
In my 96 the speakers are about 4" off the floor and they pillar does not come apart like that...
How did you lift the rear seat?!?!
Im not sure what you mean. all I did was run the chair all the way up and fold it forward you don't need to remove the seat to get to the speakers if you have any further questions please ask I don't mind Im more than happy to help and advise you on how to remove and install them to the best of my knowledge anyways hope this helps.
@@limitlesshorsepower4514 how do you fold the back seat up? Is there a lever? I have the 94 k1500 z71 extended cab
@@adrianfundora1051 yes there is a lever, should be on the underside of the seat on the passenger side
@@mountain_man1432 I appreciate the information mountain man. Take care!
The latch was broken off the bottom. Got it up with some channel locks
AND YOU DID NOT EVEN SHOW US THE INSTALL.
If you can't figure that out you're gonna need some help
@@eli72481 nope i can figure it out just fine. ive worked in the field of car audio in the past and have changed out many of speakers and head unit's i just like to watch other people do it even then i may still learn something new.
Nice truck but this was the most unhelpful video ever. If you’re gonna film a tutorial type video, then like film yourself doing what you’re supposed to do 😐 saying “pop this one out” and “unclip this one” is not as helpful as you think it is...
welp I hate to break it to you, but your opinion isn't as important as you may think. There is also tons of information elsewhere feel free to go somewhere else for it dummy .
What speakers did you use?
I sold this truck a while ago I remember them being pioneer 4x6's but im not sure of the exact model tho
Amazon sells OEM speakers