EGR Assembly Cleaning and Assembling Part 2 - Hyundai Accent
ฝัง
- เผยแพร่เมื่อ 14 ธ.ค. 2024
- This is the second part of the video.
Cleaning the EGR assembly is a moderate job. Just be sure to take your time to clean it well and remember the important points in the video to make sure that you are doing it properly, preventing from any possible damage.
hyundai
egr
Video Links:
EGR assembly removal:
Part 1:
• EGR Assembly Removal P...
Air intake box assembly removal:
• Air Intake Box Assembl...
Intercooler and Piping removal and cleaning:
• Intercooler and Piping...
Intake manifold removal, cleaning, and reinstallation:
Part 1:
• Intake Manifold Remova...
Part 2:
• Intake Manifold Cleani...
Condenser Cleaning:
• Condenser Cleaning - H...
"PLAYLIST" Hyundai Accent EGR and Intake System Comprehensive Maintenance:
• Hyundai Accent EGR and...
BGM:
TH-cam Audio Library
Nite Foul - Noir Et Blanc Vie
Thank you very much and God Bless.
#andredraftproject #hyundai #accent #crdi #egr #assembly #cleaning #assembling
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
It is like i am watching the official cleaning of the egr. Easy to follow and brilliant. Thank you.
Thank you very much!
Thanks for these videos. Brilliant and easy to follow. No unnecessary segments, just getting the job done.
Glad it helped. Thanks a lot!
I hope you can do video for Timing belt replacememt
Hi sir, I successfully cleaned the throttle body, intercooler and intake manifold with your helpful videos! Im going 45,000 km and those parts are really dirty.
I noticed the increased power and acceleration after driving it from Cubao to Las Pinas. It also became fuel efficient again.
Good thing the engine started without errors or fault codes. I really thank you for posting these videos.
Im planning to clean the EGR as well on the weekend. I would like to ask if further disassembling the module is ok? Its the 3rd or last part of the EGR that you were cleaning.
I can see on the video that it has an electronic connection/switch and I want it cleaned properly without getting the module wet.
Thank you very much!! I'm really glad to hear that you have successfully performed those jobs in your car.
There was a time where I tried to remove the bolts and disassemble the module (last part of the EGR) but the module itself won't separate from the base part. Even though I removed the bolts, something inside seems to hold it together, so I decided not to force it to prevent any further potential damage.
For that, as a safety measure, I wouldn't recommend disassembling it. If ever something happens, it would be hard since parts for the EGR are pretty expensive and hard to find.
The connection switch can be cleaned with an electrical cleaner. You can simply clean it by spraying, then make sure to let it dry before reinstalling it back together.
I hope this is helpful. Once again, thank you very much sir. Always take care.
@@DraftProject ok sir, I will not disassemble the moduel then.
Thanks again for your help! 🙂
Anyone put a blanking plate on these? Or does it bring up an engine warning light?
Thank you for your videos. How many kilometers was your car when you did this cleaning?
❤❤❤❤❤❤❤you are the best
Hi sir, are you from Philippines? Pwede magpalinis ng EGR ng santa fe 2012?
Love your channel keep it up
Thank you very much!!
Beau travail 👏👏👏
where is your shop
thanks for teaching i will try it at home
Good luck! Thank you very much too. Take care as always.
Hi Sir, nalinis ko na po EGR. i followed your video pero pag ON po check engine pa rin po. Code error: P0404
Cit timp durează toată operațiunea asta,desfăcut și montat?how long does this operation take, egr disassembled and egr installed?
Ar putea dura 1-2 zile întregi.
English Translation:
It could take 1-2 whole days.
شغل احترافي 👌💪 ممتاز جداً
شكرا جزيلا
In English Translation:
Thank you so much
Shame to see no pollution control... Flushing down drain!
Hi sir,
Thanks for this very detailed and explanative video!
I've been looking for DIY videos regarding EGR cleaning and disassembling. Fortunately, yours are also for Hyundai Accent CRDi. 🙂
What spray did you use for cleaning the electronic sensors and wirings?
Keep on posting and great job!
Thank you very much sir for your comment!
I've used electrical contact cleaner for the rest of the sensors except the MAF sensor.
For the MAF sensor, I've used Mass Air Flow Sensor Cleaner.
Thank you and will do!
@@DraftProject
Hi sir,
I tried cleaning the MAF and MAP sensors, all other sensors, switches and wirings with contact cleaner.
It did really well. No harm done especially with the MAF sensor, as we know that this sensor is extremely sensitive and must be cleaned only with MAF sensor cleaner.
But I did some research before I used this cleaner. Contact cleaner can be used as long as we spray the MAF on intervals and at enough distance. The contact cleaner must be fast drying as well.
Just wanted to share this. 😁
@@stevencaindec4623 I see! Thank you very much sir for sharing this. This is extremely helpful.
@@DraftProject 2013 Hyundai i30 CRDi 1.6 Premium 6 speed auto. Ours has no soot buildup like yours. Why is yours so bad? Do you not use 100% Full synthetic 5W30 oil and new filter change every 7,500Km's? And do you not use Diesel Premium Vortex fuel that includes additives? Our i30 has 173,000 Km's and has NEVER had this work performed nor had the original EGR replaced. Starts perfect, runs smooth has huge torque and gets 50-60mpg always. I wonder why you must not change oil often enough or even worse NOT be using 100% fully synthetic Genuine Hyundai oil and oil filter for this engine?
@@theaustralianconundrum I appreciate your comment and concerns.
Unfortunately, I couldn't answer some of your questions because the vehicle is not mine. I don't have that much idea about the history of the vehicle.
The vehicle utilizes Amsoil 5w-30 Fully Synthetic and has always been regularly changed at a specific interval.
Other than that, I don't really have that much information about it.
Thank you very much.
Hello Sir are you from Philippines? I’m going to clean my EGR too but I’m having problem sourcing out tha gasket on your video, can you tell me where did you purchase it? Thanks and more power 🔧🛠⚙️🚗
Hi sir, yes. Unfortunately, I wasn't the one who bought the gaskets. The owner of the vehicle bought the gaskets at the nearest Hyundai dealership. He ordered and waited for 1-2 months before the gaskets arrived.
Thank you very much sir!
Alright thank you very much 🤙😎🔧⚙️🛠🚗
@@DraftProject do you accept home service, i will need cleaning of my car too. How can i contact you sir?
Anong model po ng hyundai accent ito
2017 Hyundai Accent CRDi
hi sir sa ilang km dpt nag egr clean? Tia
EGR cleaning maintenance interval
Every 10,000 - 15,000 Km.
Thank you sir.
@@DraftProject sir ginawa ko ung nsa video kaso naging problema napasukan ng tubig ung egr bakit kaya?