These things are sweet made my ingot silver mustang impressive looking from the front! price is high and if they hold up then well worth it for sure, easy install! ordered these last Monday from CJ Pony and was surprised got them in 2 days even with Christmas.
Great video!!! Is it possible I make a video installing the resistors for the S550 mustang ? I saw the F150 install, are the wire colors the same for the mustang ? Please help !
Hey bill quick question my S550 doesn't have fog lights and I can't seem to get to the gray housing. I pull it and it comes right off the light bulb is inside somewhere.
Hi Bill are these lights still available? The link doesn't pull them up and I wasn't able to find them on your website or at diode dynamics. Are they back ordered or having issues?
+pierrous1212 They have been redesigned and are now available again! Here's the link: www.cjponyparts.com/led-switchback-turn-signal-with-side-marker-cool-white-front-kit-2015-2016/p/ELK12/
+CJ Pony Parts Hey what changes happened after redesigning the product? And will you please make a video or tell us as instructions how to install the resistor.
The bigger light doesn't snap in and give you the solid connection as the smaller one does. We'll see if they stay in. You kind of see him try to get that snap sound on the big one.
I've seen the installation done by Diode Dynamics, they mentioned the resistor doesn't need any cutting or splicing, do you have any extra information on that? Thanks and great video as always.
I like these switch backs from Diode Dynamics but you won't get a resister to stop the clip flop interior indicator flash and sound. I have spoken to the guys at Diode Dynamics and they just are not going to make or sell one. It makes me wonder if they EVER designed a resister for the switchbacks in the first place.
They came in and like so many others in the forums, refuse to work properly (yes I took a large amount of time aligning pins and redoing them). These are just no good. I wish they would work but sadly they stink
The question I had is will the 2018 fog light assembly fit into prior years. I think they would make a great addition to a Shelby GT 350 as it does not have fog lights upfront. 2018 ford mustang has the fog lights built into the turn signals, it would be great if an aftermarket manufacture could retrofit them to the older cars.
I just bought the switchbacks and did some research on the hyper flash. I haven't taken delivery of the car yet, so I haven't tried, but this should work without having to add resistors. If you have access to forscan, you can disable it via the computer. BCM 726-27-01 : x1xx xxxx xxxx = Front outage enabled (hyperflash) BCM 726-27-01 : x0xx xxxx xxxx = Front outage disabled (no hyperflash) I have used forscan for my F-150 and it works great. Good for disabling the double honk as well.
HELP!! Ordered these and have strobing connection problems. Ordered ANOTHER set and having the same problem. My contacts are good. It clicks in the socket but must shake loose after a mile of driving on nice roads. NEED HELP AS TO WHY THIS IS HAPPENING!!
Since I just purchased these and plan to install in couple days, I was wondering if the exterior turn signal follows the same sequence as the interior. Will it blink single, double, single, double on the outside?? Thanks for the input from whomever currently has them or had previously installed.
I noticed that your check engine light is on? Is that from a factory defect or from an aftermarket part? I'm asking because my check engine light is on my 2015 ecoboost and its because of the camshaft. Wanted to see if that were something that's been happening to multiple ecoboosts
While this is easy for a standard Mustang, it's more involved on the drivers side of a GT350 as the cooler is in the way. I got the directional out but the side maker is too hard to reach. Tomorrow I'll take the tire off and try again.
Hey Bill just wondering will this switchback only work when i turn the headlight on ? or it automatically on once you start the Car ? i'm asking cos i wanna keep the OEM look from normal running day light bulb Thank you ...
Hey Bill, hope you're doing well... I purchased this kit from Cj's in 2015. I noticed that the small light on the passengers side blinks intermittently. I'm hoping it's just beginning to go out. Do you all sell them individually? If not, is there a product number you can give me to possibly order a new one from else where? Thanks a lot for your time.
After having my lights on my car on for awhile these lights start flickering on and off. The switchbacks only. Then stuck solid Amber until leaving the car off awhile then back to normal.. Is something wrong with my set or were they over heating?
jacob sellers They absolutely should not be overheating. I would double check the lights are seated properly in the sockets since they are a tight fit.
+fredex1950 I haven't tried yet but the front lighting is the same as the US cars from what we are told so I see no reason why they won't. Your tailights are very different.
Thank you for answer Bill, i would like to change all lights of my EU Mustang GT 2016. Can you please send all links of your products, which can be used for EU Mustang GT 2016 model? then i order by you. its important for me and dont want to buy the wrong one. thank you bill.
hi bill i am a costomer and i hope you answer me, i got these parts for my mustang gt from your website 1- 2015 FORD RACING TAIL LIGHT PANEL 2-RS4362015 FB STREET SCENE UNPAINTED URETHANE REAR SPOILER 3- GT ROUSH HEAT EXTRACTORS PAIR - MOLDED BLACK 4-2015 LED TURN SIGNAL KIT WITH SWITCHBACK BULBS 5- 2015 Mustang Eibach Sportline Spring i need to ask you, are they going to fit on the 2016 mustang gt ? the dealership told me that I'm getting the 2016 instead of the 2015 thanks ! Ali
Who else noticed led switch back bulbs on this car fit kinda lose I noticed when I hit a bump they lose connection and the front turn signal don’t work . Hit another bump and they start working fine . You can barely notice maybe half of the people haven’t even noticed .
New003Snipes1 s550s don’t like leds . I installed the same ones i had in a dart worked perfectly fine . Kinda sucks I didn’t work in my car I don’t want to spend more money on lights I went back to stock my car looks boring now 😥
Cheap Car Guy American Muscle has it for 72 and I found the switchback pair on amazon for 30. Just gotta find the smaller ones now. I think they are 194 LEDs
That's everything they sell at CJ! All China made junk that is resold at a premium price! It cost 50 cents to make one of those bulbs in China if that!
I wish ford had just led's in them in the first place and reduced the size of the lenses. I never liked the way the turn signals dont line up with the lower center grille. Personally i wish they just put the turn signals in the headlight enclosures themselves like the fusion.
I've learned that the quicker blinking is Ford's way of saying the (stock) bulb is burning out. I guess there is no way to actually know when the (new) LED is going out, other than getting out of the car and checking?
One of the best things I did was buy these. The extra light at night is great. Everybody loves the turn signal clicking too.
Just did this today! Thanks so much for the great instructions.
There is a baby spider on the tire at 02:09
Alexander Vacca Soviet Union pranks gone wrong
These things are sweet made my ingot silver mustang impressive looking from the front! price is high and if they hold up then well worth it for sure, easy install! ordered these last Monday from CJ Pony and was surprised got them in 2 days even with Christmas.
Great video!!! Is it possible I make a video installing the resistors for the S550 mustang ? I saw the F150 install, are the wire colors the same for the mustang ? Please help !
Hey bill quick question my S550 doesn't have fog lights and I can't seem to get to the gray housing. I pull it and it comes right off the light bulb is inside somewhere.
What's the specifications on the smaller bulb, not the switchbacks? They look like the same bulb or similar to the MAP light.
Hi Bill are these lights still available? The link doesn't pull them up and I wasn't able to find them on your website or at diode dynamics. Are they back ordered or having issues?
+pierrous1212 They have been redesigned and are now available again! Here's the link: www.cjponyparts.com/led-switchback-turn-signal-with-side-marker-cool-white-front-kit-2015-2016/p/ELK12/
+CJ Pony Parts Hey what changes happened after redesigning the product? And will you please make a video or tell us as instructions how to install the resistor.
Do you guys know the wiring on the turn signal for the resistor install?
NSMike87 for the 15 mustangs?
Yeah.
The bigger light doesn't snap in and give you the solid connection as the smaller one does. We'll see if they stay in. You kind of see him try to get that snap sound on the big one.
great vid! avoided having to remove bumper!
I've seen the installation done by Diode Dynamics, they mentioned the resistor doesn't need any cutting or splicing, do you have any extra information on that?
Thanks and great video as always.
Mr_ATC Yes they offer a plug in resistor but it really isn't needed
Bill Tumas where i can get the LED ?
Thank you sir for the video ! Great looking car.
I didn't knew that the blink rhythm changes with leds.
The new LEDs shine brighter than the daytime running lights. Do you have any lights to replace the stock ones?
Loved your channel.
Great ideas. 👍👍👍
I like these switch backs from Diode Dynamics but you won't get a resister to stop the clip flop interior indicator flash and sound. I have spoken to the guys at Diode Dynamics and they just are not going to make or sell one. It makes me wonder if they EVER designed a resister for the switchbacks in the first place.
These look fantastic... One question, how does the change in turn signal frequency impact the rear sequential lights? THANK YOU!!!
devnull128 The rears operate in the original fashion
Awesome... THANKS! Ordering now.
They came in and like so many others in the forums, refuse to work properly (yes I took a large amount of time aligning pins and redoing them). These are just no good. I wish they would work but sadly they stink
I contacted diode dynamics and let me just say that those folks know customer service! I am back on the switchback bandwagon and love these.
The question I had is will the 2018 fog light assembly fit into prior years. I think they would make a great addition to a Shelby GT 350 as it does not have fog lights upfront. 2018 ford mustang has the fog lights built into the turn signals, it would be great if an aftermarket manufacture could retrofit them to the older cars.
Does this have any affect on the seqential rear turn signals? Or doesnt it only have a slight change to the turn signal inside the car?
This link does not send you to the product. Is the part still available??
Bill Tumas If the clicking sound bothers, what did you mention we can do?
***** There is a resistor available that will address the issue.
Will these bulbs affect the sequential affect on the taillights??? Wondering because of the turn signal marker he mentioned. Thanks!
I just bought the switchbacks and did some research on the hyper flash. I haven't taken delivery of the car yet, so I haven't tried, but this should work without having to add resistors. If you have access to forscan, you can disable it via the computer.
BCM 726-27-01 : x1xx xxxx xxxx = Front outage enabled (hyperflash)
BCM 726-27-01 : x0xx xxxx xxxx = Front outage disabled (no hyperflash)
I have used forscan for my F-150 and it works great. Good for disabling the double honk as well.
the off sync blink is driving me crazy. where can i purchase the resistor or whatever is needed to turn it back to normal?
GhostShadowXII diode dynamics dot com
HELP!! Ordered these and have strobing connection problems. Ordered ANOTHER set and having the same problem. My contacts are good. It clicks in the socket but must shake loose after a mile of driving on nice roads. NEED HELP AS TO WHY THIS IS HAPPENING!!
Since I just purchased these and plan to install in couple days, I was wondering if the exterior turn signal follows the same sequence as the interior. Will it blink single, double, single, double on the outside?? Thanks for the input from whomever currently has them or had previously installed.
They blink at the regular speed of the original lights. It's only the sound that changes in the car and the display flashing.
Do youknow if this is the same for 2018?
Its not i found out
Are these only for the Mustang, or can they work with other vehicles?
I noticed that your check engine light is on? Is that from a factory defect or from an aftermarket part? I'm asking because my check engine light is on my 2015 ecoboost and its because of the camshaft. Wanted to see if that were something that's been happening to multiple ecoboosts
Justin Mas We had the key on with the engine off so the light was on. The only issue we had with our EB so far was a bad ABS sensor.
While this is easy for a standard Mustang, it's more involved on the drivers side of a GT350 as the cooler is in the way. I got the directional out but the side maker is too hard to reach. Tomorrow I'll take the tire off and try again.
Were you able to get it? I'm interested, as I have a GT350 as well.
Hey Bill just wondering will this switchback only work when i turn the headlight on ? or it automatically on once you start the Car ? i'm asking cos i wanna keep the OEM look from normal running day light bulb Thank you ...
Johny Jmc it stays on as daytime running light. it's the same mode as oem, it's just that Amber is now replaced with white
Hey Bill, hope you're doing well... I purchased this kit from Cj's in 2015. I noticed that the small light on the passengers side blinks intermittently. I'm hoping it's just beginning to go out. Do you all sell them individually? If not, is there a product number you can give me to possibly order a new one from else where? Thanks a lot for your time.
Giovanni Adrian we do not sell them separately but Diode Dynamics should be able to help.
@@cjponyparts Sounds good! Thank you!
I bought these couple months ago and they burned out! Caused my tailights to malfunction as well
After having my lights on my car on for awhile these lights start flickering on and off. The switchbacks only. Then stuck solid Amber until leaving the car off awhile then back to normal.. Is something wrong with my set or were they over heating?
jacob sellers They absolutely should not be overheating. I would double check the lights are seated properly in the sockets since they are a tight fit.
So are those drl's?
Hi Bill, will these lights work with the UK/Euro version of the new Mustang?
+fredex1950 I haven't tried yet but the front lighting is the same as the US cars from what we are told so I see no reason why they won't. Your tailights are very different.
Hi Bill. Is it fit to European version mustang 2015 Ecoboost? Thx!
泓璋陳 EU models have different wiring and sockets
Can someone send me the link to get the resistor please!
Can I use this Lights for my EU Mustang 2016 too ???
Sorry no they will not.
Thank you for answer Bill, i would like to change all lights of my EU
Mustang GT 2016. Can you please send all links of your products, which
can be used for EU Mustang GT 2016 model? then i order by you. its
important for me and dont want to buy the wrong one. thank you bill.
are these the diode dynamic bulbs?
Ride The Pony Yes
how much do they cost too
I did this and my left turn signal is not coming in at all
Is that orange or red?
Are these legal?
where i can that LED Bill ?
There is a link above in the video info Right below the published date Click the down arrow if on mobile
are these lights no longer available
+shane R The manufacturer made a change to the design, new versions should be available soon.
+Bill Tumas Thanks, how much do they normally cost?
+shane R Around $75 pair
these work great,getting used to the clicking inside the car is odd
excelerater after almost a year of owning the car the clicking got annoying resistors are easy to install you should give it a try
I thought that they sold the resistor as well. Anyways I will be buying this.
undefeated2012 They offer it and its plug and play but not really needed.
Dope asf
They look so great. I just would be annoyed by the clicking noise.
hi bill i am a costomer and i hope you answer me, i got these parts for my mustang gt from your website
1- 2015 FORD RACING TAIL LIGHT PANEL
2-RS4362015 FB STREET SCENE UNPAINTED URETHANE REAR SPOILER
3- GT ROUSH HEAT EXTRACTORS PAIR - MOLDED BLACK
4-2015 LED TURN SIGNAL KIT WITH SWITCHBACK BULBS
5- 2015 Mustang Eibach Sportline Spring
i need to ask you, are they going to fit on the 2016 mustang gt ? the dealership told me that I'm getting the 2016 instead of the 2015
thanks ! Ali
ahssasmajnon123 Yes all will fit the 16 without issue.
Bill Tumas thanks man !
Ooooohhhh I like it!!!!
are these still avalible
+shane simpson They are still being redesigned by the manufacturer
Who else noticed led switch back bulbs on this car fit kinda lose I noticed when I hit a bump they lose connection and the front turn signal don’t work . Hit another bump and they start working fine . You can barely notice maybe half of the people haven’t even noticed .
New003Snipes1 s550s don’t like leds . I installed the same ones i had in a dart worked perfectly fine . Kinda sucks I didn’t work in my car I don’t want to spend more money on lights I went back to stock my car looks boring now 😥
my switch back bulb fell into my light fixture!
Rj Dan hey did you ever get the bulb out. Mine did the same thing.
Did you ever get yours our Wild Stang? it just happened to me
How Did you Retrieve it?
Would these match 6000k led headlight bulbs?
Anyone have problems taking off their pins holding down the splash guard?
Alejandro Barrera, they say push in to release
Is it just me or do these not match the drls?
They don't
Ok !
I had sticker shock for a minute. $75 bucks huh . . . .I think I'm just cheap
Cheap Car Guy American Muscle has it for 72 and I found the switchback pair on amazon for 30. Just gotta find the smaller ones now. I think they are 194 LEDs
That's everything they sell at CJ! All China made junk that is resold at a premium price! It cost 50 cents to make one of those bulbs in China if that!
I wish ford had just led's in them in the first place and reduced the size of the lenses. I never liked the way the turn signals dont line up with the lower center grille. Personally i wish they just put the turn signals in the headlight enclosures themselves like the fusion.
I've learned that the quicker blinking is Ford's way of saying the (stock) bulb is burning out. I guess there is no way to actually know when the (new) LED is going out, other than getting out of the car and checking?
i installed em in my car. i get head turners here & there
Happy they sell diode dynamics raxiom is junk
cut the music ffs - I can't hear anything u say
Diode dynamics is trash.
I installed mine and I'm having the hyper flash issue on the outside as well. Would I need to install the resister?