Good to see you still posting. I loved your SR80Pro. I started with a small boat and now want to make somthing like that too if I can follow your instructions! Cheers from Dowunder.
Hi Paul. i just bought the same carbon zonda ...but the flrxshafts came very very tight , i think they are a little thiker than a 3/16 and once i took them out which eas bery hard they wont get in again even with lots of grease on tnem. Does this happened to you also ? Where can i buy 2 new zonda 3/16 flexshsfts ? Which 2x 6S batts are you using ? How many mah each one ? thanks mate. !!!
Hi I got it from AliExpress and swapped out the motor prop and esc and battery mounts but the flex cable is a good quality 4.76mm it's holding upBoats about same as Pursuit it likes a bigger motor and weight
![POLYCAT - ข้อความรูปยิ้ม :) [Music Video]](http://i.ytimg.com/vi/lBhIgPGCgbI/mqdefault.jpg)
Good to see you still posting. I loved your SR80Pro. I started with a small boat and now want to make somthing like that too if I can follow your instructions! Cheers from Dowunder.
What an amazing place to run some boats!! Absolutely beautiful!! The boat looks and sounds great too!!
Nice set up, and what a beautiful location.
Beautiful boat, was/is on my wishlist... That setup rocks, got it in dom... If you want 65+ take 6s, if 75+ take 8s. I like it!
Thanks,8s temps are low.Boat is good full Carbon Kevlar inlay with a solid lid no flex in it
Thats really moving, those SSS motors are great .have the same one in a Delta force .
Yes very good motors easy on the esc and batteries very good run time
Looking Good out there !!
Thanks😊👍🌞
Wish I would have gotten that boat when I could. I have the twin MTR but didn’t get the phantom. 🤦♂️
Good looking boat its a ripper
Perfect combo by the look of it. Dam NZ has all the beauty
Yes it seems about right .NZ yes not bad at all,nice steak as well👍
How are those ducks so chill 🤙
Oh they may not be used to this kind of activity they did get the message
Hi Paul. i just bought the same carbon zonda ...but the flrxshafts came very very tight , i think they are a little thiker than a 3/16 and once i took them out which eas bery hard they wont get in again even with lots of grease on tnem. Does this happened to you also ?
Where can i buy 2 new zonda 3/16 flexshsfts ?
Which 2x 6S batts are you using ? How many mah each one ?
thanks mate. !!!
Hi paul. Great boat ! Graet job ! How long is this boat ? Can you please tell me where to buy it? Thanks .
Hi I got it from AliExpress and swapped out the motor prop and esc and battery mounts but the flex cable is a good quality 4.76mm it's holding upBoats about same as Pursuit it likes a bigger motor and weight
@@paulcooper7162 thanks paul. !! And how much does it cost in us $ ?
@@eduardonessim4499 Hi about $500USD but it only has SSS 3674 2075kv motor and 120 Seaking set at 15 degrees timing way to high
@@paulcooper7162 Ok. Thanks Paul
Nice. Know what speed is on this video with the 1650kv and 8s?
Hi I'm unsure,using a small prop can use a ABC 1815-1745 = 48mm should be faster
Im running 82 with 47mmx1.6 on 8s