Centurion Arms C4 Bolt Carrier, Hard Chromed, With Sand Rail Cuts
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Quick look at the new Centurion Arms hard chrome C4 BCG with Sand Rail cuts 🇺🇸
Nine Line Apparel shirts: (discount code MRGUNS20): mrgunsngear.or...
mrgunsngear
Telegram: t.me/MrgunsngearChannel
Facebook.com/Mrgunsngear or Facebook.com/GNGfacebook
mrgunsngearinsta
Email sign up:
Mrgunsngear.com
MRGNG.org
My Amazon store:
www.amazon.com...
My videos on WPSN: www.watchwpsn....
To sign up for the Warrior Poet Society Network (code MRGUNS for 10% off): mrgunsngear.org...
Music Epidemic Sound
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on arms should be carried out by a licensed individual and all state and federal rules apply to such. We (including TH-cam) will not be held liable for any injury to yourself or damage to your arms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a retail shop and DO NOT sell or deal in arms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or arms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance I include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with intention of driving commentary and allowing freedom of speech.
Those are the OCKs bolts and they are superior to the TDP screws.
Yes, there will be a bolt available in the future.
New Centurion Arms facility in Bargersville is on-line and doing fine.
They just released the bolts yesterday.
I certainly hope that Centurion Arms will offer a full chromed BCG in the near future. They make awesome stuff.
Phosphate carrier key is way better for staking without chancing cracking and truing the bottom if it isn’t perfectly parallel to the carrier
Thank you Centurion for making awesome stuff!
Some people need enhanced reliability cuts on their underwear to get the sand out of their manginas
😂
🤨🌈😂🤣 yeah they do though. Damn furries
Those are OCKS. They are awesome gas key screws.
Ordered two already👍🏾
I see a lot of drill pipe at work that’s hard chrome and those joints of pipe back in unbelievably good shape.
Reminds me of the KAC sand cutter Carrier
Their patent ran out, same with their bolts
@@boygonewhoopdataZZ ah that makes sense
SOTAR did a gauge test on this and it passed with great results
School Of The American Rifleman. 👍🏼👊🏼 🇺🇸🦅📜🐍
Optimized carrier key screws: OCKS
Excellent. Love centurion. Was going to get a chrome bcg from Young Manufacturing, but then heard there's some qc issues (? my memory is a little fuzzy on that).
Interesting gas key screws? OCKS exist for a reason! 🤭 Duck Gang! 🤙
Sand Cuts!
Scionics bcg...... I believe they were the first using those type of gas key screws
Mill spec gets a rep that it doesn't deserve. Pulling my fair share of armory duty at Ft Sill and Ft Brag there are thousands of millspec M-16 and M-4s that have been in service for decades that have gone through thousands of users and countless rounds still with their original millspec component.
While that's true, the milspec for factory AR components is actually significantly more rigid than most commercial market offerings, even some of the higher end ones. That's not to say they'll remain in that spec for long, but a newly issued M4 is likely built much more stringently than most ARs you'll find off the shelf- Though obviously you'll also see some that blow the military rifles out of the water.
Also, I think you mean "Ft. Liberty." Apparently Ft. Bragg was too controversial🙄
Leg units, those bolts see maybe a few hundred rounds a year. Infantry units, not much more during down cycles.
Thank you Sir
Either a contract was announced, or KAK is absolutely killing it right now. These look identical to what Centurion is offering (aside from KAKs gas vent hole that directs gas downward)
jUSt aS gOOd
Gas being directed downward into the magazine is fucking stupid.
With regards to bolt carriers, you can take 3 dozen chrome lined phosphate milspec carriers, and every one of them will perform slightly differently and have significantly different dimensions, based upon their manufacturer and how tightly they adhere to the TDP. Some will be reliable in any gun, some will be overgassed, some will be undergassed. With BCGs, unfortunately, you can't just look at the big front of the box advertising points and assume they're good. What you need to be buying is the tolerances and QC that a good BCG will provide. I'm not saying KAK is bad, I don't know. But Centurion is well known for rigidly adhering to the TDP and offering consistently high quality products. That's especially important for a chromed carrier, as many chrome BCGs are absolutely terrible.
I see hole for captured fire pin retaining pin, is it? And those OCKS gas key screws are the way to go
Nice
Knights who?
Weird finish for chrome, looks more like nickel.
Note to PSA fanbois, your Toolcraft BCG isn't just as good.
No one ever said they are. We said Toolcraft is TDP correct, and that is definitely good enough for self-defense work anywhere you might need to use it.
@sheldoniusRex Toolcraft QC isn't great for a TDP spec BCG. Microbest, LMT, FN, Colt are better.
Maybe not, but they’re certainly good enough for almost the entirety of the bell curve. FocusTripp here on TH-cam has had a lot of experience with them and found them to be excellent.
I saw all this even tho I’m a die-hard chrome fan boi, with my main BCG being a Young Manufacturing Hard Chrome BCG with the HMB Bolt in it. Love that bcg and bolt to bits, been nothing but excellent. That being said, I’ve also found toolcraft BCG’s to have nothing to complain about.
@@Enjoyer.762microbest - no. My microbest BCG had lots of burrs and dents on bolt tail and gas key. My toolcraft milspec CL phosphate is just as gas efficient and in-spec as the microbest chrome
@@sluttybutt Cool story. Video evidence or didn't happen.
Does it work?
I thought the tolerances were ideal to keep shit out, not let it in. Bravo Co for me
I don't like those cuts seems like to me. It would push the oil out.
Probably not a bad carrier, but Centurion doesn't care if their products perform and doesn't stand by their products.
Wow that looks like a terrible way to carry bolts!