Thank you Todd! Great basic information. An explanation of how the rollers work with ink, solution and the transfer of ink from fountain, Plate and blanket would be helpful. Also how to hang a plate and the fine tuning to achieve perfect registration. Thanks again Todd!
awesome little press, did many 4 color jobs on it. best thing we did was put crestline water units on it. once you learn the little extra tweaks you can do on it, it is a great machine
Nice video guys. Any idea what is causing a feed table chain to break? I have a pressman experienced on Itek 3985 operating Ryobi 3302M. He's good pressman but has no idea what he's doing or not doing to cause this. Happened to each chain within a month.
Jerry Kirkland I had the same problem when I first began running the Ryobi 3302. I had previously ran a Heidelberg QM-46 for 10 yrs so going to the Ryobi took some getting used to as it requires a lot more set-up time. I was used to auto-features offered by the Heidelberg & there is def nothing 'auto' about the Ryobi 3302! Geez but lemme know if you're still having issues maybe i can help.
For Indians my comment is - Ye machine bhangaar hai. Jin logo ne iske videos dekh kar kharidi hai un sabka chutiya kata hai. 5 saal use karne ke baad mere experience se 3302H aur 3304HA sabse bekar models hain. Never buy this machine
wzp guys) greetings from Estonia) I'm totally IN ) have used this one for some time, but only one-sectioned)) u didn't tell about the powder in your video, would be a great idea for a new vid)
No the 3302 was a dedicated 2 color offset press. The Ryobi perfector was a 3200PFA. A completely different press. I was a service engineer for over 20 years on these machines.
ijk240695 I can relate to this as well. I started out as a Chief 17 operator for Control Data Corporation. Black ink only 15-25,000 impressions and 300 electrostatic plates a day for 6 years. No wonder I became an engineer instead.
I own this model press. It can print 4 color rather well
Thank you Todd! Great basic information. An explanation of how the rollers work with ink, solution and the transfer of ink from fountain, Plate and blanket would be helpful. Also how to hang a plate and the fine tuning to achieve perfect registration. Thanks again Todd!
El video es Ryobi 3302M, descripción del video 3202 :S
Not a good idea to spread ink onto the rollers. You will get an uneven film of ink, making it more difficult in getting the correct color.
Plzz sir contact me my 3985 small offset press one problem
Felicitaciones.Gran video.Se agradece 👍❤️
show some attention to detail boys, and clean those water bottle so they look clear.
Im learning how to use this press at work.
great video
Let me know if anyone wants a job in Sarasota Florida
I used to be a press operator for 15 years, but a had an accident operating the press, I was unable to work for 9 months. Unfortunately they fired me.
Blanket solution? Fountain solution. Lol
we were in high school lol
Fountain solution not blanket
For all the people leaving snarky comments this was a high school video project, not a professional tutorial, grow the fuck up, great job guys
Roybi reday video send me
awesome little press, did many 4 color jobs on it. best thing we did was put crestline water units on it. once you learn the little extra tweaks you can do on it, it is a great machine
Muito legal cara
this fucking music
I used to run one of these with crestline dampening it was truly awful
You're right, this machine is awful piece of sht
@@rs-iu7oz found the Heidelberg guys. lol It's amazing (not really, they're cheap) how many press shops use this machine. Our shop has 2.
You were probably a shitty pressman.
Nice video guys. Any idea what is causing a feed table chain to break? I have a pressman experienced on Itek 3985 operating Ryobi 3302M. He's good pressman but has no idea what he's doing or not doing to cause this. Happened to each chain within a month.
no clue lol we were in high school when we made this lol
Jerry Kirkland I had the same problem when I first began running the Ryobi 3302. I had previously ran a Heidelberg QM-46 for 10 yrs so going to the Ryobi took some getting used to as it requires a lot more set-up time. I was used to auto-features offered by the Heidelberg & there is def nothing 'auto' about the Ryobi 3302! Geez but lemme know if you're still having issues maybe i can help.
Yea you had the table that feeds the paper way too high
You probably had the knob that inches the table up turned too much to the left
Thanking you for the video. Please confirm maximum size of paper for the machine
For Indians my comment is - Ye machine bhangaar hai. Jin logo ne iske videos dekh kar kharidi hai un sabka chutiya kata hai. 5 saal use karne ke baad mere experience se 3302H aur 3304HA sabse bekar models hain. Never buy this machine
wzp guys) greetings from Estonia) I'm totally IN ) have used this one for some time, but only one-sectioned)) u didn't tell about the powder in your video, would be a great idea for a new vid)
Couldn't get past the loud music, didn't watch it fully
puedes narrar en español, por favor, para Perú.
Roybi 512 rejisteson sketing video
Hi Guys! a Very nice video. Please if you have more videos like this, upload it on here.
Thanks a lot!
Selindar grippar setting
Any idea what are these two white buttons for? The one next to the red jogger . Minute 5:40 there are two white buttons. Any idea how they work.
1st one turns on water system 2nd turns on ink duct roller
Jogger button?that isnt even a thing
Trying to remember back about 30 years but wasn't that press at perfector 1/1. 2/0
No the 3302 was a dedicated 2 color offset press. The Ryobi perfector was a 3200PFA. A completely different press. I was a service engineer for over 20 years on these machines.
ijk240695
I can relate to this as well. I started out as a Chief 17 operator for Control Data Corporation. Black ink only 15-25,000 impressions and 300 electrostatic plates a day for 6 years. No wonder I became an engineer instead.
Nice little press, simple and effective, nice to see a small Ryobi with a decent feed and delivery :D I've worked on some without side lays lol
it's japaneese) women and children can use it )))
lol
price
Is this Ryobi 3302 or 3202 ?
Ryobi 3302M
nice
NIce
Good
true edgy 2002s intro there
nice, thanks
where are you located
This was made at Maplewood Career Center in Ohio
pake bahasa indonesa aja