Once thing I failed to mention is that the 60fps analog DVR on the DJI goggles doesn't lose sync with GoPro footage like Fatshark DVR does. It's spot on from start to finish!!! Check out the Digidapter: britishdroneindustries.co.uk Also on Airblade UAV: www.airbladeuav.com/products/digidapter-plug-play-analog-adapter-for-dji-hd-fpv-system?_pos=1&_sid=c42e86b1a&_ss=r And RotorGeeks: rotorgeeks.com/digidapter-plug-play-analog-adapter-for-the-dji-digital-fpv-system
Hey Ed, thanks for reviewing. Please DJI, put out the FPV Googles version 2 with a built in Analog diversity receiver (I'm not a fan of external cables required with 3rd party options). Oh, and add independent focus for each eye for us users with eyeglass prescriptions. In the meantime, I may have to modify my googles with this 3rd party option as Ed has.
Very informative! Glad to hear about the low latency. I just got into FPV and have a Tinyhawk 2. I want to eventually get into larger drones with the DJI HD system, but I am having so much fun flying this micro that it would be sad to stop. I was afraid that if I wanted better goggles, then I was going to have to buy Fatsharks eventually AND the DJI goggles for HD, but I'm glad to see how well this adapter works! Now I know to just save for the DJI goggles, this adapter, and a crossfire receiver. Thank you very much!
Really Appreciate this video..Was tired of bringing my big Headplay Goggles everywhere with the DJI ones so I could still fly my analog gear...Looks like a Great solution!
I got a furious smart power case and attached it to the strap behind my head. Make the goggles feel much better as it balances the weight. Still waiting on the digiapter to ship so I can't really tell how battery life will be affected.
Great review. Thinking of buying the dji goggles for now and save for the rest after. I have a ground station so this setup would be great till I get the dji air unit. Wouldn’t have to buy the analogue adaptor if you have a ground station.
Can you recommend an adapter that can be attached at the side of the goggles? I have v2 goggles with the iflight antenna to the front. I don't wanna take it off. I'm not that familiar with these analog modules. I'd rather use an old box goggles instead of taking off the iflight antenna thing at the front. Cheers and thx for this video
Looks really good . I just have 2 questions though. Number 1 in terms of latency, Does this have the same latency when using the analog module on fatsharks hdo2s? And can you fly it with other analog pilots?...or would dji still stomp the signal of other analog pilots?
Yes same latency in effect. I'm not sure if it's the same on paper, but no difference in feeling for me. And the DJI goggles don't transmit anything when a digital quad isn't plugged in, so no one will experience digital interference if only the goggles are powered on.
The problem with these seems you have to navigate through the menus to select AV input, you can't selected it via the channel buttons on the side of the goggles as far as I know. Which makes switching video feeds in flight... harrowing or impossible. Plus there is the latency and DJI screensaver screens that blank out during switches. O d want to use this to switch between the digital camera and another analog camera at lower tilt angle for landing.
Hi, could you say with one firmware do you have in your goggles when your film it? I have a problem, I have same goggles, but i haven't other menu, without AV-In section. Thanks
I just did this install but can't get my module cover to sit correctly. It easily moves and pops off. Is the cover you used in this video for the Fatshark Dominator?
4:43 I have vtx with mic on quad, my analog goggles record sound, and I have headset and I listen to the sound of quad. If I buy dji goggles, that mod for risiver, I will not hear my analog quad? And analog dvr will not record sound? Is it right?
rying to find how you enable the AUX input on the goggles V2, should it automatically detect the input or do you need to enable it In the goggles? I can't seem to find a menu. Thanks
It looks like the analog feed is really small. Mine is also the same as yours. I have problems with that because my eyes aren't as good as when I was younger. Do you know if it's possible to fill in the screen like how we see it in caddx vista?
I don’t know how long you waited for you pair but dhl is killing me with the way they ship things. Would have had them by now but I guess when you ship them by sail boat from Germany it takes longer then usual.
I'm thinking on getting the rekon 5 drone as my first drone but having a hard time finding what goggles and controller I should get, any you recommend, where did you get your setup from?
@ED Ricker, I just installed this on my DJI Goggles Ive always used a patch with an omni but I noticed everyone has gone to 2 omni antennas why is that?
DJI's goggle battery doesn't seem to have enough amperage to power both the goggles and the analog module. I use a regular 3s or 4s XT60 Lipo, usually 1300mah from an old quad.
Hey Ed love the info you give . I have a problem with my dji goggles I can't find AV in, In setting on the hud screen I see transmissions but that's only channels I see setting but nothing in settings says AV in. help if you can
Hi, do you have the goggles set to DJI FPV System and not DJI FPV Drone or O3 Air Unit or whatever else? If they're in the right mode, then AV is listed under Settings.
Analog video sends out whatever you have your video transmitter set up to send out. The Digidapter here and the added video receiver receives that signal, so it displays whatever's coming at it. It doesn't add or subtract any info.
@@todd34 if your in the dji fpv drone settings go to about: switch to air unit, then go into goggle settings and go to av and you should be done.... I didnt like it so all my analog stuff on ebay... hope that helps
Are you using 4:3 or 16:9 camera here in DJI googles? I accidentally purchased two Caddx Nano Ant's - 4:3 and 16:9. Can't decide which of them is better for these googles.
It's using the AV In function, so there's no aspect ratio selection for that. The Digidapter just shows what it shows. I honestly have no idea if a 16x9 camera will appear 16x9 with the digidapter. I've always used 4x3 analog cameras.
If you want a really nice head strap .. FatStraps are great. It come with a sleeve on the side so you put your battery if you wanted.. I personally bought the FuriousFPV battery pack for the DJI goggles.. uses two 18650 and makes is light and no cable running down into my pocket for a 4s battery. Oy yeah.. you can personalize your fatStrap if wanted
Thanks, actually just bought a Fatstrap the other day, this one: fatstrapsfpv.com/shop.html#!/Digital-Red/p/177370149/category=45863709 Feels great so far!
Ed Ricker nice... the FuriousFPV Battery pack fits perfect in the side slot of those straps. I just received mine made for the DJI goggles . Also there is a nice 3D printed part the helps with the cable management. Not sure how to send pics on here
They're the TrueRC Stubbies. Supposedly better, but I'm not so convinced lol. I do like the lower profile of them though, and maybe they eek out a little more performance, not sure.
Actually a very good question. I was wondering what changes need to be made to go back to DJI flying. Did you figure it out? Unfortunately Ed doesn't answer many questions here.
It lasts probably 2, maybe 2.5 hours. Not terribly long, but not a huge honking battery either. I don't mind packing two of them for an all-afternoon session.
@@EdRickerVlogs yeah that’s not bad at all. I just got my DJI’s yesterday, going to fly with them for the first time tomorrow. Can’t wait! Also, I saw this “FuriousFPV” battery case earlier on Reddit, that uses 18650s for the googles. I ordered one of those since I have a ton of 18650s, and can save all the packs for flight
awesome review!! Super thorough and answered several of my questions. I might have to throw down a pile of cash for this. Plus you got a sub from me today!
@@Elammedal Is your setup dji goggle with dijidapter and rapidfire? Are you still experiencing blackout screens? What firmware is on your module? And is your fpv camera set to ntsc? Does the analog go black then comes back after few seconds? Or does it go black and then dji screen saver appears and stay on?
@@utubeamg so I found out shortly after commenting. Not near my headset now. But there was a setting somewhere in the menus to switch FPV to old school look. It will still work digitally but the menus are setup entirely different. If I remember tomorrow I'll comment back again.
@@MasterBlud Thanks, yeah I actually found that I had to switch to out of DJI FPV mode and then the AV input was available. Thanks again for your reply!
Good morning Ed what antennas are you using on your DGI goggles? they look different than the stock ones and looks like you not to take them off every time you put them in a case. Also I have Fatshark Dom V3 with no receiver want to buy one that will work with both and what do you like best?? I'm going to get that setup great video 👍🏻👍🏻🍺🍺Thanks have great weekend
Currently an Ovonic 1300mAh 4s LiPo. I usually switch it out after 6 or 7 packs...could probably get more out of it but I like to bring it down to storage voltage.
Have there been any improvements to the system currently (2023)? latency, how is it? Is it the same as the DJIv2 HD glasses? Leaving my HDO and Going for the V2 glasses + this adapter... (I used google translate, sorry for the inaccuracy) - BRAZIL tualmente houve alguma melhora no sistema (2023) ? latencia, como ela está ? É a mesma dos óculos em hd do DJIv2 ? Deixando meu HDO e Indo para os óculos V2 + este adptador... (usei o google tradutor, desculpe pela imprecisao) - BRAZIL
Switching between V1 and V2 DJI goggles shouldn't really change much with this setup. I use V1 goggles in the video, but V2 is very similar. I don't know of any updates with the Digidapter itself.
Hi bro I have the dji goggles v2 and they are great but the settings dont look the same like you have all thoses options but for me it’s just for the dji fpv drone plz help me
You have to change it to the DJI FPV system if you're not using the DJI FPV drone. Scroll down in the menu, I can't remember exactly what option, the basically you have to scroll further down than you think. The correct selection is at the very bottom of one of the settings menus, and you have to keep going down the menu so that the page scrolls up. It's at the very bottom.
If you had a pair of FatShark goggles, you could use an HDMI cable to see the DJI digital feed in them...but to do that, you'd still need the DJI digital goggles in the first place, and a few pieces of gear to get the video HDMI out...so it'd be way overcomplicating the issue and much more expensive than just getting the DJI FPV goggles themselves. The only exception would be to use an entirely different digital system like HDZero/Byte Frost, which has it's own receiver module that fits onto Fatshark goggles. But that's a whole different ecosystem, and many consider HDZero to be subpar to DJI Digital.
Haha well originally I plugged it in the bottom one but it wasn't working, and then I realized I just hadn't pushed it in far enough. I got video out from both ports eventually. But I was definitely hoping for audio, which apparently is not a feature right now.
@@EdRickerVlogs have you tried to take the audio from the bottom, and the video from the top, and mixing them in a single jack to see if it gets recorded?
@@EdRickerVlogs I hope dji is fixing this with some firmware update. This audio issues are very annoying and absolutely not matching with the product price! :(
Rapidfire is $150 or so, but the True-D module I showed in the video is about $75. Really depends what you're going for. But yeah, factor in the module ontop of the digidapter.
Im getting slanted lines on my analog feed via bdi adapter, tried multiple reciever, happens on all, is this a known issue? Is there a way to fix it? Screen grab here ibb.co/HBgbtBH
Once thing I failed to mention is that the 60fps analog DVR on the DJI goggles doesn't lose sync with GoPro footage like Fatshark DVR does. It's spot on from start to finish!!!
Check out the Digidapter: britishdroneindustries.co.uk
Also on Airblade UAV: www.airbladeuav.com/products/digidapter-plug-play-analog-adapter-for-dji-hd-fpv-system?_pos=1&_sid=c42e86b1a&_ss=r
And RotorGeeks: rotorgeeks.com/digidapter-plug-play-analog-adapter-for-the-dji-digital-fpv-system
Hey Ed, thanks for reviewing. Please DJI, put out the FPV Googles version 2 with a built in Analog diversity receiver (I'm not a fan of external cables required with 3rd party options). Oh, and add independent focus for each eye for us users with eyeglass prescriptions. In the meantime, I may have to modify my googles with this 3rd party option as Ed has.
That would be a great addition! Thanks for stopping by.
And DJI made v2, locked for use with their proprietary FPV drone monstrosity instead :D
Very informative! Glad to hear about the low latency. I just got into FPV and have a Tinyhawk 2. I want to eventually get into larger drones with the DJI HD system, but I am having so much fun flying this micro that it would be sad to stop. I was afraid that if I wanted better goggles, then I was going to have to buy Fatsharks eventually AND the DJI goggles for HD, but I'm glad to see how well this adapter works! Now I know to just save for the DJI goggles, this adapter, and a crossfire receiver. Thank you very much!
please add a list of what you used as a complete conversion in the video description please
thanks, loved the video
Nice review man. I was about to order the digidapter but wanted to watch a review first. Ordering now. Thanks bro.
Really Appreciate this video..Was tired of bringing my big Headplay Goggles everywhere with the DJI ones so I could still fly my analog gear...Looks like a Great solution!
I got a furious smart power case and attached it to the strap behind my head. Make the goggles feel much better as it balances the weight. Still waiting on the digiapter to ship so I can't really tell how battery life will be affected.
Good info I ordered the digiadapter and rapid fire module supposed to be delivered tomorrow.
Great review. Corresponds to my experience with the BDI Digiadapter.
set camera to NTSC,when you lost the signal it will not show the DJI logo again
Very cool.
I don't even have an analog drone, but I still want to buy this because it looks badass.
This was very informative, thank you Ed.
Great review. Thank you.
I really liked your video I am thinking of asking for one for myself, thanks Ed 👍👌🤗
Great review. Thinking of buying the dji goggles for now and save for the rest after. I have a ground station so this setup would be great till I get the dji air unit. Wouldn’t have to buy the analogue adaptor if you have a ground station.
If you don't have AV in in settings go to FPV mode and select then powercycle ( power off then on). then it would be available
Can you recommend an adapter that can be attached at the side of the goggles? I have v2 goggles with the iflight antenna to the front. I don't wanna take it off. I'm not that familiar with these analog modules. I'd rather use an old box goggles instead of taking off the iflight antenna thing at the front. Cheers and thx for this video
Thank you Sir. Great review. Any recommendations for the antennas on the Rapidfire module? Thanks
thx mate your vid help me to connect the analog unit and set it up. 👍
"analog friends" i lol'd
Looks really good . I just have 2 questions though. Number 1 in terms of latency, Does this have the same latency when using the analog module on fatsharks hdo2s? And can you fly it with other analog pilots?...or would dji still stomp the signal of other analog pilots?
Yes same latency in effect. I'm not sure if it's the same on paper, but no difference in feeling for me. And the DJI goggles don't transmit anything when a digital quad isn't plugged in, so no one will experience digital interference if only the goggles are powered on.
Great information 👍
The problem with these seems you have to navigate through the menus to select AV input, you can't selected it via the channel buttons on the side of the goggles as far as I know. Which makes switching video feeds in flight... harrowing or impossible. Plus there is the latency and DJI screensaver screens that blank out during switches. O
d want to use this to switch between the digital camera and another analog camera at lower tilt angle for landing.
edit: nevermind great video
how's the latency?
Hi, could you say with one firmware do you have in your goggles when your film it? I have a problem, I have same goggles, but i haven't other menu, without AV-In section. Thanks
I just did this install but can't get my module cover to sit correctly. It easily moves and pops off. Is the cover you used in this video for the Fatshark Dominator?
4:43 I have vtx with mic on quad, my analog goggles record sound, and I have headset and I listen to the sound of quad. If I buy dji goggles, that mod for risiver, I will not hear my analog quad? And analog dvr will not record sound? Is it right?
Correct, you won't hear your quad's mic and you won't be able to record it via DVR. :(
Thanks for the video. What if youu want to use dji hd? What do you do?
rying to find how you enable the AUX input on the goggles V2, should it automatically detect the input or do you need to enable it In the goggles? I can't seem to find a menu. Thanks
It looks like the analog feed is really small. Mine is also the same as yours. I have problems with that because my eyes aren't as good as when I was younger. Do you know if it's possible to fill in the screen like how we see it in caddx vista?
What are your antennas called? Not the ones on your Dji goggle but the enalog ones
Video Aerial Systems Crosshair and Ion
I don’t know how long you waited for you pair but dhl is killing me with the way they ship things. Would have had them by now but I guess when you ship them by sail boat from Germany it takes longer then usual.
Do you have to remove the plate to use the gf system agin
Nice review...
I'm thinking on getting the rekon 5 drone as my first drone but having a hard time finding what goggles and controller I should get, any you recommend, where did you get your setup from?
Did you try this with a tinyhawk 3
@ED Ricker, I just installed this on my DJI Goggles Ive always used a patch with an omni but I noticed everyone has gone to 2 omni antennas why is that?
Subbed nice review! I have to ask since I'm planning on going Digital why does everyone have a red nose sore from these goggles?
Where can I find a black cover like that?
Awesome convinced me to go this route, love not having to carry two sets of goggles around.
What is that 90 degree antenna adapter called?
What battery did you use? Can you use the default Dji goggles battery? Also can you still plug-in your phone to stream the screen?
DJI's goggle battery doesn't seem to have enough amperage to power both the goggles and the analog module. I use a regular 3s or 4s XT60 Lipo, usually 1300mah from an old quad.
is this also compatible with the v2 goggles?
Hey, hope your doing well.
How is the TrueRC antenna? Still good?
Still good even now! I use them every time I fly.
Why do i not see an AV IN option on my V2 goggles??????
is it working with the new DJI googles that you got from the DJI FPV combo ?
Yes it should work just fine, same connections.
Hey Ed love the info you give . I have a problem with my dji goggles I can't find AV in, In setting on the hud screen I see transmissions but that's only channels I see setting but nothing in settings says AV in. help if you can
Hi, do you have the goggles set to DJI FPV System and not DJI FPV Drone or O3 Air Unit or whatever else? If they're in the right mode, then AV is listed under Settings.
Where can I find this red protective cover for the module?
Mine came stock with it. It was the black ones I had to buy separately.
Does dji record muted or with sound?
It's not only muted, the recording is lacking an audio track entirely. Completely silent.
Dji v1? hello. I would like to know if all the information appears for fixed wings. type GPS cordenqdas and other data. thanks
Analog video sends out whatever you have your video transmitter set up to send out. The Digidapter here and the added video receiver receives that signal, so it displays whatever's coming at it. It doesn't add or subtract any info.
problem is, the settings in the goggles on the v2 are different and i cant figure it out ugh
same. i know theres a way to change the settings back to the v1 version. any luck switching to av?
@@todd34 if your in the dji fpv drone settings go to about: switch to air unit, then go into goggle settings and go to av and you should be done....
I didnt like it so all my analog stuff on ebay... hope that helps
@@Mike-fm3km thanks! i switched it to legacy settings and switched to av no problem. having a blast w my little nanohawk 😌
Anyone figure out a way to slap mavic mini into these analog DJI goggles?
Hi Ed, great video, informative as always!
However, my DJI google with AKK receiver has no audio at all both live and DVR, is it normal ?
Yes unfortunately there's no audio with the DJI FPV goggles...maybe one day, we can hope!
what resolution is dji??
Are you using 4:3 or 16:9 camera here in DJI googles? I accidentally purchased two Caddx Nano Ant's - 4:3 and 16:9. Can't decide which of them is better for these googles.
It's using the AV In function, so there's no aspect ratio selection for that. The Digidapter just shows what it shows. I honestly have no idea if a 16x9 camera will appear 16x9 with the digidapter. I've always used 4x3 analog cameras.
@@EdRickerVlogs Thanks. Already heard about 4:3 only from AV in DJI googles elsewhere. Seems I should use 4:3 cameras then.
If you want a really nice head strap .. FatStraps are great. It come with a sleeve on the side so you put your battery if you wanted.. I personally bought the FuriousFPV battery pack for the DJI goggles.. uses two 18650 and makes is light and no cable running down into my pocket for a 4s battery. Oy yeah.. you can personalize your fatStrap if wanted
Thanks, actually just bought a Fatstrap the other day, this one: fatstrapsfpv.com/shop.html#!/Digital-Red/p/177370149/category=45863709
Feels great so far!
Ed Ricker nice... the FuriousFPV Battery pack fits perfect in the side slot of those straps. I just received mine made for the DJI goggles . Also there is a nice 3D printed part the helps with the cable management. Not sure how to send pics on here
Which antena you are using on v2 (4 Gray one)?
They're the TrueRC Stubbies. Supposedly better, but I'm not so convinced lol. I do like the lower profile of them though, and maybe they eek out a little more performance, not sure.
Dumb question, do I have to unplug the AV plug powering the digiadapter if I’m flying dji air unit?
Actually a very good question. I was wondering what changes need to be made to go back to DJI flying. Did you figure it out? Unfortunately Ed doesn't answer many questions here.
Does the analog picture show full screen in the goggles?
No it's definitely smaller, check out 7:20 in my video where I show what it looks like
How long does the battery last on it? Like that 1300mAh Ovonic you have there
It lasts probably 2, maybe 2.5 hours. Not terribly long, but not a huge honking battery either. I don't mind packing two of them for an all-afternoon session.
@@EdRickerVlogs yeah that’s not bad at all. I just got my DJI’s yesterday, going to fly with them for the first time tomorrow. Can’t wait! Also, I saw this “FuriousFPV” battery case earlier on Reddit, that uses 18650s for the googles. I ordered one of those since I have a ton of 18650s, and can save all the packs for flight
awesome review!! Super thorough and answered several of my questions. I might have to throw down a pile of cash for this. Plus you got a sub from me today!
Can you still use headphones with this module on ?
No, the DJI goggles don't feature audio out from the analog video broadcast.
Does it induce extra latency versus plugging the rapidfire into a fatshark goggle?
I don't really notice a difference. Maybe 10 or 12ms more but I don't really feel it.
@@EdRickerVlogs Great!
What's that red module? I keep seeing that one.
That's the ImmersionRC Rapidfire Module. www.racedayquads.com/products/immersionrc-rapidfire-goggle-receiver-paired-w-irc-antenna-set?currency=USD&variant=31269546426481&gclid=Cj0KCQjwtMCKBhDAARIsAG-2Eu_GDUvc4-agGQxOurVMFDgqLuwXUq_Bdib5mrLlZv9tFSuFTbzBzwoaAnDfEALw_wcB
Mine switches back to dji mode showing dji screen saver when there's no video feed. Firmware was updated. Any idea why?
did you figure out why? i just got this and im having the same issue
@@Elammedal Is your setup dji goggle with dijidapter and rapidfire? Are you still experiencing blackout screens? What firmware is on your module? And is your fpv camera set to ntsc? Does the analog go black then comes back after few seconds? Or does it go black and then dji screen saver appears and stay on?
Awesome video like always, what's the best place to buy my first fpv equipment including the quad? Is there is any retailer in the USA? Thanks 🙂👍
MIGUEL TORRES depends on where you’re from but I really love racedayquads.com
Fast and very friendly customer service. Check them out.
I have the V2 with the newest update but do not see the option for AV in
Yeah I'm in the same boat, anybody know how to get the AV option to show? I have the DJI FPV combo in case that makes a difference.
@@utubeamg so I found out shortly after commenting. Not near my headset now. But there was a setting somewhere in the menus to switch FPV to old school look. It will still work digitally but the menus are setup entirely different. If I remember tomorrow I'll comment back again.
@@MasterBlud Thanks, yeah I actually found that I had to switch to out of DJI FPV mode and then the AV input was available. Thanks again for your reply!
@@utubeamg yeh it was the biggest of headaches. I was all like, do I have a version that doesn't have it or am I missing something?
Good morning Ed what antennas are you using on your DGI goggles? they look different than the stock ones and looks like you not to take them off every time you put them in a case. Also I have Fatshark Dom V3 with no receiver want to buy one that will work with both and what do you like best??
I'm going to get that setup great video 👍🏻👍🏻🍺🍺Thanks have great weekend
The antennas on the DJI goggles are the TRUERC singularity stubbies LHCP.
@@Infinite_Ouroboros What if I own RHCP will they not work with the DJI goggles? I know that's the case w/analog
@@armani007E55 It will work but the range and quality will be really bad, pretty much unusable. Better off using same polarisation.
@@Infinite_Ouroboros basically sell all my analog stuff 😄 got it 🤙
While I have you and good recommendations on a good patch for the DGI?
What battery do you use for your Dji Googles?
Currently an Ovonic 1300mAh 4s LiPo. I usually switch it out after 6 or 7 packs...could probably get more out of it but I like to bring it down to storage voltage.
will this work for the dji goggles 2
nope I don't think so.
Have there been any improvements to the system currently (2023)?
latency, how is it?
Is it the same as the DJIv2 HD glasses?
Leaving my HDO and Going for the V2 glasses + this adapter...
(I used google translate, sorry for the inaccuracy) - BRAZIL
tualmente houve alguma melhora no sistema (2023) ?
latencia, como ela está ?
É a mesma dos óculos em hd do DJIv2 ?
Deixando meu HDO e Indo para os óculos V2 + este adptador...
(usei o google tradutor, desculpe pela imprecisao) - BRAZIL
Switching between V1 and V2 DJI goggles shouldn't really change much with this setup. I use V1 goggles in the video, but V2 is very similar.
I don't know of any updates with the Digidapter itself.
Hi bro I have the dji goggles v2 and they are great but the settings dont look the same like you have all thoses options but for me it’s just for the dji fpv drone plz help me
You have to change it to the DJI FPV system if you're not using the DJI FPV drone. Scroll down in the menu, I can't remember exactly what option, the basically you have to scroll further down than you think. The correct selection is at the very bottom of one of the settings menus, and you have to keep going down the menu so that the page scrolls up. It's at the very bottom.
@@EdRickerVlogs after change it can I change it back to the dji fpv drone
@@EdRickerVlogs thanks bro keep doing what u doing I just found it an did it
Can you do the opposite? See digital on analog goggles?
If you had a pair of FatShark goggles, you could use an HDMI cable to see the DJI digital feed in them...but to do that, you'd still need the DJI digital goggles in the first place, and a few pieces of gear to get the video HDMI out...so it'd be way overcomplicating the issue and much more expensive than just getting the DJI FPV goggles themselves.
The only exception would be to use an entirely different digital system like HDZero/Byte Frost, which has it's own receiver module that fits onto Fatshark goggles. But that's a whole different ecosystem, and many consider HDZero to be subpar to DJI Digital.
@@EdRickerVlogs thanks for the answer
What are these antennas?
I use the TrueRC Singularity Stubbies
You dont need to plug audio from vrx :) But I saw that you silently switched to av-in :)
Haha well originally I plugged it in the bottom one but it wasn't working, and then I realized I just hadn't pushed it in far enough. I got video out from both ports eventually. But I was definitely hoping for audio, which apparently is not a feature right now.
@@EdRickerVlogs have you tried to take the audio from the bottom, and the video from the top, and mixing them in a single jack to see if it gets recorded?
@@alessandroiannacci1367 unfortunately no, it doesn't even record an audio track in the DVR file.
@@EdRickerVlogs I hope dji is fixing this with some firmware update. This audio issues are very annoying and absolutely not matching with the product price! :(
@@EdRickerVlogs great review, although it does not record audio tracks, but does this bottom audio out works when plug in an earphone?
A link for your amazon googles case please :)
No prob amzn.to/2Ocz8MQ
I bought one for me in Brazil.
Wait, the modules costs 100+???
Rapidfire is $150 or so, but the True-D module I showed in the video is about $75. Really depends what you're going for. But yeah, factor in the module ontop of the digidapter.
"Hey! I AM wearing a mask! And yes, I am not from around here."
Is true dji on analog has latency or it was just a bad statement from joshua bardwell to get money fron fatshark?
lol well when the system came out there WAS latency with Analog, but a subsequent firmware update fixed it.
You live on a military base? That looks a lot like an old base housing...lol
Haha no, we flew near at a former psychiatric hospital, and those are their transitional houses boarded up and soon to be demolished.
Im getting slanted lines on my analog feed via bdi adapter, tried multiple reciever, happens on all, is this a known issue? Is there a way to fix it?
Screen grab here
ibb.co/HBgbtBH
Maraqli Hazirlamisiniz.Kanaliniza abune oldum.Ümid edirem ki siz de eynisini edceksiniz.Önceden teshekkürler
I lost 2 drone!! Because of that adapter..
... just buy some fat sharks
It's really nice to be able to switch back and forth without having to bring two sets of goggles. Cheaper too
Mine switches back to dji mode showing dji screen saver when there's no video feed. Firmware was updated. Any idea why?