Thank you for this video. Can you please provide us with data concerning the energy needed if you do activate the steam modus? Most data I could find was only for the espresso setting but I want to make mostly cappuchini....
thank you for this video. So there is no volumetric dosing on this machine? And on the Luna, is it a volumetric dosage and can we also play with the change of extraction pressure (admittedly in a less practical way)?
The sunny works with the time management of the pre-infusion and infusion, while the luna with a volumetric, but in this case the profiling valve is absent, for further information please contact info@quickmill.it
Why the pressure is 13 bar when you used 2-cup mode and you didn't adjust it? This machine has a fatal design issue when you run it in automatic mode it disconnects OPV at all from the water line. Because of this you see so much pressure. Engineers use adjustable OPV to give the ability to adjust pressure in manual mode and adjust pre-infusion pressure in dosing mode. But once preinfusion state ends up, machine disconnects OPV via electromagnetic valve
@@till_57 machine has a fatal design issue when you run it in automatic mode it disconnects OPV at all from the water line. Because of this you see so much pressure. Engineers use adjustable OPV to give the ability to adjust pressure in manual mode and adjust pre-infusion pressure in dosing mode. But once preinfusion state ends up, machine disconnects OPV via electromagnetic valve
Hi, how to adjust brew pressure quick mill sunny 2046 for button single shot & double shot? Now 12-13bars, I wan to Change 7bars. I see this video 2:17, T-ON 10 DOSE 25, brew coffee 10sec 3:34 12bars. Thank you
Thank you for this video. Can you please provide us with data concerning the energy needed if you do activate the steam modus? Most data I could find was only for the espresso setting but I want to make mostly cappuchini....
thank you for this video. So there is no volumetric dosing on this machine? And on the Luna, is it a volumetric dosage and can we also play with the change of extraction pressure (admittedly in a less practical way)?
The sunny works with the time management of the pre-infusion and infusion, while the luna with a volumetric, but in this case the profiling valve is absent, for further information please contact info@quickmill.it
@@quickmill Thank You (a machine with the both ;-) )
Why the pressure is 13 bar when you used 2-cup mode and you didn't adjust it? This machine has a fatal design issue when you run it in automatic mode it disconnects OPV at all from the water line. Because of this you see so much pressure. Engineers use adjustable OPV to give the ability to adjust pressure in manual mode and adjust pre-infusion pressure in dosing mode. But once preinfusion state ends up, machine disconnects OPV via electromagnetic valve
Can you adjust the pressure in automatic mode to a defined lower value? In the video it goes up to 13-13,5 bar.
And he quickly lowers the camera to keep you from seeing the pressure.
@@till_57 machine has a fatal design issue when you run it in automatic mode it disconnects OPV at all from the water line. Because of this you see so much pressure. Engineers use adjustable OPV to give the ability to adjust pressure in manual mode and adjust pre-infusion pressure in dosing mode. But once preinfusion state ends up, machine disconnects OPV via electromagnetic valve
Hi, how to adjust brew pressure quick mill sunny 2046 for button single shot & double shot? Now 12-13bars, I wan to Change 7bars. I see this video 2:17, T-ON 10 DOSE 25, brew coffee 10sec 3:34 12bars. Thank you
To the barista - do not twist while you tamp down, it’ll unseat the puck of coffee and introduce channeling.
Good machine but NEVER ever let this guy make videos about brewing coffee.
𝓹𝓻𝓸𝓶𝓸𝓼𝓶 💔