Removing the lock: "There are little spacers you have to capture! You can't lose it, make sure it goes back in its spot!" *Precedes to knock it down into the middle of the bike.* I was rolling
@elitenoob1147 We are in Northern California, Redwood City south of San Francisco. Yes, there are a whole series of videos already posted about this bike where we completely rebuild it after having the forks and triple clamps straightened. Dave Moss Host
nice job, I had a similar incident and just bought an aftermarket one piece race tail, and modified it to accept the brake light and licence plate. Much cheaper, lighter and simpler than the Yamaha option.
The screw makes its own thread into the receiving metal as it is turned. Hence self tapping terminology. The project GSXR had many video's made on it. You can see almost all of them on my website at feelthetrackdotcom under chassis set up videos or type in Dave Moss project GSXR in TH-cam.
Hey Dave good night..I had a Yamaha r6 that I have Ben working on for over 3 years now..I get all the parts it needed and it back up..it's running great and the things is in place..I am not getting horn,fans and no hight beem light..I'll like your take on it please thank you..
hi just wonder when putting my track faring on does it need anything under it to protect the battery and wiring and important stuff under there as it does not use the original seat it all 1 piece . thanks your vids r great help
I've watched more than 20 videos trying to find out how to remove those pull pins! Thank you!! You are the only one who has described them.
You're a legend, helped me strip apart the tail end and change over some damaged parts. Brilliant vid!
Removing the lock:
"There are little spacers you have to capture! You can't lose it, make sure it goes back in its spot!"
*Precedes to knock it down into the middle of the bike.*
I was rolling
Nice 1 mate just got an 08 R6 and was scratching my head trying to take the fairing of this realy helped Thanks!
Why do I watch this at 6:13 in the morning I don't even have an R6
cause this guy's a genius
i think its the time, its 6.24 for me
Very informative good stuff. I'm from newcastle upon tyne England , wanted to change few bits of firings, it will Help all the way. Thanks again
@elitenoob1147 We are in Northern California, Redwood City south of San Francisco. Yes, there are a whole series of videos already posted about this bike where we completely rebuild it after having the forks and triple clamps straightened.
Dave Moss
Host
nice job, I had a similar incident and just bought an aftermarket one piece race tail, and modified it to accept the brake light and licence plate. Much cheaper, lighter and simpler than the Yamaha option.
The screw makes its own thread into the receiving metal as it is turned. Hence self tapping terminology. The project GSXR had many video's made on it. You can see almost all of them on my website at feelthetrackdotcom under chassis set up videos or type in Dave Moss project GSXR in TH-cam.
What is that little metal part called at 2:42 I need to replace this on my r6
dave another great episode!! cheers!
@Davie272 yes, there's a rebuid series coming once we get through all the tear down videos.
Dave Moss
Host
I like watching these kinda videos, are there going to be videos where you put the bike back together?
I recently looped my bike and my whole tail is broke off can that be fixed or is the bike totaled?
Hey Dave good night..I had a Yamaha r6 that I have Ben working on for over 3 years now..I get all the parts it needed and it back up..it's running great and the things is in place..I am not getting horn,fans and no hight beem light..I'll like your take on it please thank you..
that dog is cute af
It have one male connecter below the rectifier that I am trying to figure out what it goes to..everything else is in place..
great job
Min 2:54 what is the name of that part????
Please tell me the name I need to replace this part
hi just wonder when putting my track faring on does it need anything under it to protect the battery and wiring and important stuff under there as it does not use the original seat it all 1 piece .
thanks your vids r great help
were u located? were did u get the front end fixed bc it was bent?
update on the dogger?
if the dog pee'ed on one the bike tire or one of the parts that would have been hilarious X) LOL!
Can i swap my 2008 r6 rear fairing to 2011 r6 i need answer, thx
@Waqasryk1 glad we can help out. I will be back in Manchester for Christmas to visit family. Cheers!
Dave Moss
Host
Cool dog!
Whippet or IG?
@xnifex there's plenty more coming :)
Dave Moss
Host
@elitenoob1147 Google gp frame and wheel for the shop
4:07 ooooopppsssss..
Can I have the rear fenders please lol
Then Chris did not post the video. You can contact him via ottmatye at gmail dot com
FIRST!!!
Ηευ μαν thanks a lot!