Front fairing and lights is a 20 minute job. Use Zip lock bags for parts! Mirrors first, the lights come off with the fairing - 4 bolts. The wiring has a couple of clips and everything comes off in one go. You will use the stock fairing stay (2 bolts on the steering head) unless you are using something else. Dave Moss Host
@irontruck You didn't miss it. Moss is being all wimpy because the wrap isn't done yet and he doesn't want to ride it until it's wrapped. For all we know the injectors are clogged cuz it's been sitting so long
hello i took my gas tank off also, but i confused the vapor lines and cant remember which one goes where, could you please show me the correct way. thanks
hi dave thanks this was great got it done not quite in your 20 mins. ;) when i put on the track fairings do i need to take of the block that the rubber gasket sits on to to give the fairings a bit more room and also the stock screen has the little indentions at the top but the fairing does not allow for this do i cut the fairing or is there a way around this. sorry to be a pain and i hope u know what i mean. thanks for your help.
Офигеть, сейчас этим мотоциклом владею я Теперь ездит он в России Такая же вмятина на баке, скол на пластике у фары, потертости на крышке генеротара и пластике, на нём все так же как и на видео
hi dave this is very help full thinking of having a dry run changing to my track fairings now ive got them painted just want to ask how long it would usually take u to remove the front fairings and lights. and is the light bracket just held on by the couple of bolts below the clocks as yours in this vid is broken so just like to ask.
you can remove the block but you should consider having something to stop the fairing rubbing itself in its place. If by indentations you mean the clip area at the top of the windshield, you can trim the fairing for that purpose. Dave Moss Host
Hi, After watching your videos multiple times, I feel like you are the right person to ask about this problem that i am having with my Yamaha R6 2011, 13000 Miles. Okay, so when i start my bike, its fires up cold real nice. After the temperature reaching 135 F, the RPM will start fluctuating. It will start bouncing like a cowgirl on steriods. After few bounces, engine will die. If i put it in gear and ride it, at low RPMs it will misfire. Going through the forums and videos, i ended up replacing Spark plugs, Ignition Coils, Fuel filter, changed cam and pick up sensor but the problem is still there. I do not know what else to look for. I need guidance about this problem. Any help is appreciated.
Hey and good night sir..how are you..I hope all is well..I just put back a 2006 r6 yzr after 2 years plus..I am not getting the fans ,horn,high not coming on..can you shear some lite on it thank you sir..I have learn a lot from watching you program ..
@xnifex within a week for P 2, and the wrap is selected, we just need to get it done. I will be trying to schedule that this week if I can with the "wrapper". There's a joke there somewhere....... Dave Moss Host
My R6 just got friction plates changed now the bike shudders /vibrates when moving of when letting out the clutch. It shakes bad at that bitting point. Never did it before, it was smooth before.
AHS Society Don't know if you ever got an answer, try the R6 forums. Or go on Facebook and join a group called, Motorcycles and parts for sale. You might get your answer there.
2007, Its so beautiful you put up with everything wrong about it. I dont like the noisy clutch when you ride at low speed. It is a demanding bike which you learn how to ride. It does not do you any favors that is for sure. The low down stuff is not so good, the top end stuff is no complaints.
Hmm, my 2013 has very noisy injectors, well I being told its injectors. I'm guessing since mine is a 2013 I don't have many complaints. Flawless response no matter what the weather is like. Has good acceleration and power, I'm very happy with it...unfortunately 3 weeks yesterday I wrecked in it. And now it'll sit in the shop for a while :(
I just found this channel, Im loving it. I have not got me a bike yet but Im hoping by this summer Ill be riding.
Where are the performance upgrades?
That big fairing. I usually always just take the Fin off separately.
the paintjob of the R6 is amazing!
yay moss is back! definitely want to see the rest of project 750.
Front fairing and lights is a 20 minute job. Use Zip lock bags for parts! Mirrors first, the lights come off with the fairing - 4 bolts. The wiring has a couple of clips and everything comes off in one go. You will use the stock fairing stay (2 bolts on the steering head) unless you are using something else.
Dave Moss
Host
@irontruck You didn't miss it. Moss is being all wimpy because the wrap isn't done yet and he doesn't want to ride it until it's wrapped. For all we know the injectors are clogged cuz it's been sitting so long
hello i took my gas tank off also, but i confused the vapor lines and cant remember which one goes where, could you please show me the correct way. thanks
hi dave thanks this was great got it done not quite in your 20 mins. ;)
when i put on the track fairings do i need to take of the block that the rubber gasket sits on to to give the fairings a bit more room and also the stock screen has the little indentions at the top but the fairing does not allow for this do i cut the fairing or is there a way around this. sorry to be a pain and i hope u know what i mean. thanks for your help.
Офигеть, сейчас этим мотоциклом владею я
Теперь ездит он в России
Такая же вмятина на баке, скол на пластике у фары, потертости на крышке генеротара и пластике, на нём все так же как и на видео
Waaah?! What happened to the Gixxer 750?! We never saw that finished on the track.... or did I miss that? :P
hi dave this is very help full thinking of having a dry run changing to my track fairings now ive got them painted just want to ask how long it would usually take u to remove the front fairings and lights. and is the light bracket just held on by the couple of bolts below the clocks as yours in this vid is broken so just like to ask.
you can remove the block but you should consider having something to stop the fairing rubbing itself in its place. If by indentations you mean the clip area at the top of the windshield, you can trim the fairing for that purpose.
Dave Moss
Host
should put these vids in a play list, or number the epps, i keep clicking on the wrong next vid D; but other then that im lovin the series! R6 ftw!!
yeah i brok a couple push pins while figuring out how to get them off haha
Hi,
After watching your videos multiple times, I feel like you are the right person to ask about this problem that i am having with my Yamaha R6 2011, 13000 Miles.
Okay, so when i start my bike, its fires up cold real nice. After the temperature reaching 135 F, the RPM will start fluctuating. It will start bouncing like a cowgirl on steriods. After few bounces, engine will die. If i put it in gear and ride it, at low RPMs it will misfire.
Going through the forums and videos, i ended up replacing Spark plugs, Ignition Coils, Fuel filter, changed cam and pick up sensor but the problem is still there.
I do not know what else to look for. I need guidance about this problem. Any help is appreciated.
@firingace in a couple of weeks once we catch up and finish most of the AMA work.
Hey and good night sir..how are you..I hope all is well..I just put back a 2006 r6 yzr after 2 years plus..I am not getting the fans ,horn,high not coming on..can you shear some lite on it thank you sir..I have learn a lot from watching you program ..
My fairing stay broke where it connects to the steering head. So pissed
hi what s the name of the thing you removed out. i also broke my bike of that one. And i dont know how to fix that .Thank you
that pepsi comercial was hilarious lol
@xnifex within a week for P 2, and the wrap is selected, we just need to get it done. I will be trying to schedule that this week if I can with the "wrapper". There's a joke there somewhere.......
Dave Moss
Host
My R6 just got friction plates changed now the bike shudders /vibrates when moving of when letting out the clutch. It shakes bad at that bitting point. Never did it before, it was smooth before.
AHS Society Don't know if you ever got an answer, try the R6 forums. Or go on Facebook and join a group called, Motorcycles and parts for sale. You might get your answer there.
I solved the problem Some crooked mechanic put cheap friction plates on the bike. I went and got Yammie plates and the problem went away immediately.
Oh wow, that is some messed up thing to do. I would be pissed off. How are you liking your R6? What year is it?
2007, Its so beautiful you put up with everything wrong about it. I dont like the noisy clutch when you ride at low speed. It is a demanding bike which you learn how to ride. It does not do you any favors that is for sure. The low down stuff is not so good, the top end stuff is no complaints.
Hmm, my 2013 has very noisy injectors, well I being told its injectors. I'm guessing since mine is a 2013 I don't have many complaints. Flawless response no matter what the weather is like. Has good acceleration and power, I'm very happy with it...unfortunately 3 weeks yesterday I wrecked in it. And now it'll sit in the shop for a while :(
Love these videos thanks!
5 ***** when is the next video due.
I can't stop staring at his one little stand of hair below his chin. What the fuck is that bro? xD
Thank you. I'm glad that you find them useful! You'll find more info at feeelthetrack(dot)com
Dave Moss
Host
I have zx 1000 and gsx 600 2013 but i .this year I buy r6 and is really strong and beautifull.
haha, basically the same damage I did to my r6
and I did pretty much the same taking it apart