Thanks for the videos on this. I opted to take my front bumper cover off and set the harness tucked in behind it secured with zip ties. I also de-pinned the green connector then used a hole punch to make a small hole on the rubber grommet on the firewall. This allowed me to feed the harness through it and pull it through tight so it created a good seal to prevent moisture and smells from coming through. Also opted to attach the 12V battery cable inside the fuse box along with the signal wire to the lamp relay making a cleaner install. Loomed everything and zip tied. Looks like factory. Thank you for making these videos. it helped me out alot.
Love the video bro....the best that's available on TH-cam...you explained it well along with visual recording, so those that dont know about car can see it clear what your are talking about and not get lost....been looking for a vi6like this for my Toyota highlander...thank you!!!
what happened to that other piece that was attached to the fog light blank ? also it would have been helpful to see the fire wall after you ran the wire - were you able to close it or did you have to cut a hole? great video.. I have a 2019 and I want to do the same...
Thx for the video. Was very helpful. I bought the kit and was happy with the results however, I have my switch turned off but with a dimmer light all the time even when not running. Any advice on how it supposed to light ? Thx
I bought foglight harness it doesnt come with fuse in it and the color wires are black , white, and yellow. I know that the black is for ground, is the white color is always goes to the battery.
I followed every step you've done but still have the lights won't come on. U mentioned something bout u splice the ground? Why? I connected the ACC to the parking but didn't work at all. What did I do wrong?
I have the exact fog lights on my 2018 rav4 LE installed by toyota. My fog light look like flash lights when they are on. I dont know what happened but they are not bright like your fog lights. Any idea?
Very good video. I used to put all of the harness near the fusebox in the car and getting the 12v for the relay with an "add a circuit". You should definitively solder your wire on the 12v from the corner light by the way...
Hi there, I wanna install that one on my rav4, can you please tell me. What is the name of fog light and which online site did you bought it. Thanks. Hopefully you will see my message thanks
Thanks for the videos on this. I opted to take my front bumper cover off and set the harness tucked in behind it secured with zip ties. I also de-pinned the green connector then used a hole punch to make a small hole on the rubber grommet on the firewall. This allowed me to feed the harness through it and pull it through tight so it created a good seal to prevent moisture and smells from coming through. Also opted to attach the 12V battery cable inside the fuse box along with the signal wire to the lamp relay making a cleaner install. Loomed everything and zip tied. Looks like factory. Thank you for making these videos. it helped me out alot.
Love the video bro....the best that's available on TH-cam...you explained it well along with visual recording, so those that dont know about car can see it clear what your are talking about and not get lost....been looking for a vi6like this for my Toyota highlander...thank you!!!
Thanks for your time .
what happened to that other piece that was attached to the fog light blank ? also it would have been helpful to see the fire wall after you ran the wire - were you able to close it or did you have to cut a hole?
great video..
I have a 2019 and I want to do the same...
Thx for the video. Was very helpful. I bought the kit and was happy with the results however, I have my switch turned off but with a dimmer light all the time even when not running. Any advice on how it supposed to light ? Thx
Ez peasy on the battery connection. Thanks !
Would it be possible on the final red wire step to just connect it to an (add a fuse) vs patching into park lights ?
Does the last red cable connecting to the park light (green cable) the same as connecting to the ignition ???
Why would u install the wires on the battery such a rookie mistake u should of got power from.the interior fuses much cleaner
I bought foglight harness it doesnt come with fuse in it and the color wires are black , white, and yellow. I know that the black is for ground, is the white color is always goes to the battery.
I followed every step you've done but still have the lights won't come on. U mentioned something bout u splice the ground? Why? I connected the ACC to the parking but didn't work at all. What did I do wrong?
I have the exact fog lights on my 2018 rav4 LE installed by toyota. My fog light look like flash lights when they are on. I dont know what happened but they are not bright like your fog lights. Any idea?
Very good video. I used to put all of the harness near the fusebox in the car and getting the 12v for the relay with an "add a circuit". You should definitively solder your wire on the 12v from the corner light by the way...
The old fashion twist method works perfectly
No need to solder it
Shrink wrap and it's good to go
how did wire the fog lights ..
Thank you for explaining each step. A friend might be needed for some steps :)
Is there anywhere else I can connect the park light wire to the harness?
Hi there, I wanna install that one on my rav4, can you please tell me. What is the name of fog light and which online site did you bought it. Thanks. Hopefully you will see my message thanks
Im iffy on getting the wire through the firewall.
You install your fog light switch upside down.
very good and straight to the point
Where do you buy the kit?
Thanks
very good vidio many thanks
excellent job
Switch is upside down and loose
Very gud video man