Install OBDII Scanner and Configure DashCommand
ฝัง
- เผยแพร่เมื่อ 25 พ.ย. 2017
- Please watch: "Fedora 28 Workstation - Best Practices: Secure Installation"
• Fedora 28 Workstation ... -~-
Detailed instructions on installing a Foseal Bluetooth OBDII scanner and DashCommand.
Foseal Bluetooth OBD2 Scanner Check Engine Light OBDII Bluetooth Car Diagnostic Scan Tool for Android Devices
www.amazon.com/gp/product/B00...
DashCommand (OBD ELM App)
play.google.com/store/apps/de... - ยานยนต์และพาหนะ
![USAB Showcase: CANADA vs USA [OFFICIAL STREAM]](http://i.ytimg.com/vi/m9Cz3xsdDgc/mqdefault.jpg)
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 5](http://i.ytimg.com/vi/g5wpgeAIzMs/mqdefault.jpg)
![[4K직캠] BABYMONSTER(베이비몬스터) - FOREVER](http://i.ytimg.com/vi/PS3UAFto1z8/mqdefault.jpg)
I got torque pro and was blown away lol this is cool tho gonna download it and see. I like torque pro tho I can see transmission temp just everything make your own gauges on each screen. Check it out but I'm downloading the one your showing now to see if it has anything I don't already have.
Thanks Mark .
Bro u crack me up man!! Thanks for the review I downloaded dashcommand last week and have been wondering what obd device to purchase to link to dashcommand and think I'll go with the one you got .
OBDLink 426101 ScanTool MX Bluetooth:
What's the other app you mentioned that has the map feature?
Where exactly online did you find all the transmission information about your car for the dash commander
Boa noite, sabe me dizer se ele mostra a isso quando a porta está aberta ou quando está sem cinto? Ou pressão de pneu? Queria usar em um tablet com o dashboard.
How do I set my fuel level? It doesn't seen to want to read my fuel level automatically. Where do I find my AFR?
Does it always run when the engine is off or does it shut off as well when the engine is off?
Can any of obd2 scanner work with dashcommond
hey man that is a sweet app you got. How did you get a trans temp reading to work?
Mine is not working. Systems says "Detecting supported PIDs". Car is subaru wrx 2008
Hello buddy, nice video!
I would like to ask if you know how to add fuel info? Because I can’t get any fuel information or torque info. I entered most of the information required. But fuel info I can’t get any details. The only fuel info I could enter was the fuel capacity.
Thanks
You managed to find the quirkiest parts of the software. You can only do that after you fill your car up. I don't even mess with it. You'll probably only use it for about a week. Be sure to subscribe. I think I dissed Torque Pro too hard. I am going to do a video after BlueDriver it has some cool features. Both apps are cheap.
Does it read Boost from nitrous like a boost gauge layout and can you mix and match them the gauges to show on the screen the way you want them
Yes
I get 30 minutes to use the gauge and after the 30 minutes the gauge stop working....plz help me
it works in iphone
I have DashCommand generated log's but can't find a way to view those logs on a PC and troubleshoot / analyze the data. Do any obd2 scanners etc come with software that can display logged data in a usable format on a pc so a person can benefit from the data without having to purchase 3 digit $ additional software?
Unfortunately I haven't used the logging feature. Furthermore, I have been using Linux exclusively since the mid 90s. Data analysis in Linux is really easy (... all I have ever used) and the software is free. I am going to put out more and better videos on this I just got sidetracked with some work issues. When you see data analytics the way it should be, you'll switch to Linux.
ScanXL (Palmer Performance, also) can replay the logs. You have to enter the PIDs that you want to monitor in DashCommand.
Tx. Will this tell me why my Ram won't crank? Full power, but no crank. Will it give a code that means "Starter receiving power but not turning" or "Starter solenoid malfunction"?
Also, ANyone know if they work on Linux or if there is a linux app? tx
There is a Linux App it's called pyOBD
www.obdtester.com/pyobd
working great with peugeot 307 hdi 2.0 136 hp, dashcommand shows: 125 hp 310 nm
Hello , i have Peugeot 307 2007 will it work with my car please ? And it just want the obd2 connecter and android phone ?
does it tell the hp at the wheels or just total engine hp
How do you get AFR Readings??
AFR readings would only work in a Vehicle that uses a "wideband" sensor. Most vehicles use a "Narrowband" sensor.
Hey Mark , does this app work with IOS ? Or Android only ?
Both
arent you mistaked about the drag coef? since it shouldnt be more than 5 in any car. for any SUV its 0,35
Sorry haven't been watching the comments. Not Sure.
ecomodder.com/wiki/Vehicle_Coefficient_of_Drag_List
Will DashCommand work with BlueDriver OBD2 ?
No. I had blue Driver. Now I have
OBD Link MX+
Will this work on a 1998 International 3800 school bus?
If it has and OBDII port it will.
Is there a way to check your battery voltage with this app?
Yes
I have question does the speedometer accurate?
Mine is pretty spot on. Driving by speed monitors and it matches +- 1 mph
Yea I’m gonna try and mess with the settings... I redline this this all day. K series motors are built for high rpms
It's not k pro..but it will work for the d series I'm gonna start flipping.
Will this app work with any obd Wi-Fi reader?
They operate off of Bluetooth but there are a number of OBDII adapters that will work with it. Fosel is one of the cheapest.
how do you enable HUD?
It doesn't have HUD capability.
Dash command says my car has 85 horsepower 😂
At certain RPMs it does. HP changes over the RPM spectrum. Get it closer to the red line it will be more.
Wizeeeaaakk
Torque Horse Power kick up the RPMs
Is it an early 80s Corvette? If so, it's pretty accurate. 😝
Hi, how do I add fuel price in this app?
Your going to have to wait until you put gas in the car. They must not trust you to be honest if you don't do it then.
what do you mean " they must not trust you to be honest if you don't do it then"? I just wanna add fuel price me to know how much money I'm spending on gas.
I have know idea why they make you wait till you fill the tank. I was not a part of writing the application. After you fill your tank you will be able to enter the price per/gallon or liter.
ok, thank you very much.
just hit the gas pump emblem,push it again it will come up with the settings. the top row is the gallons you just put in. next line is were you key in the price of the gas. click the check mark to enter.
Mine doesn’t connect
You have to set up your Bluetooth connection correctly. That is done through Android. I would look at that part of the video again. You will probably figure it out. Dashcommand also has to be set to Elm.
That’s what I was thinking yesterday, I took my rpms to 7500 and it said 85 hp
I know older cars do not have that much HP. I would check your vehicle settings on the Dashcommand APP. Don't blow up your car trying to debug application settings.
Your plugs are rated for 100k miles. Suspension... the trans in k series blow. Could be a few things. 85 seems super low. I had the car In my pic tuned to 170 with struts. Full exhaust. And 205/50/15s it was decently impressive. The ep3 I have now I got from a friend..beat the car I am in now by 20 car lengths.
Don't know or see the use of the performance 🤔 you must be 1 of those slowmofos getting in/enter the highway at 30mph driving in the left lane at 55mph on a 65mph zone 😉