😍 Here's a full list of the parts you'll need: kit.co/whoismatt/1500-2000-video-editing-pc-2022-edits-4k-6k-8k-raw-video P.S. I colored this video with my presets, get them here: whoismatt.com/luts
Matt, are you coming out with a new computer build video for 2023? I need to build one soon, so if not, would the parts list be approximately the same from this video? Thx!
Hello. I come from Vietnam. I don't have much knowledge about computers so I really need your explanation about my problem. Currently I have $1,000 to build a computer configuration to edit TH-cam videos. Video duration is about 1-2 hours. The software I use is mainly Adobe and Capcut. How should I build the configuration? Please give me advice, thank you for reading.
This video is one of the most helpful and complete video I've ever watch. I never even leave comments on videos, but I needed to say this video is AMAZINGA. Thank you so much!
I built a fresh pc last year with the 5900x and 64gb ram, I however couldn't get hold of any reasonably priced graphics cards so had to stick with my 1660ti which was a very capable 4k editing rig. Finally though the price of cards are now back to some normality and I managed to pick up a really good priced 3070, and I think its the perfect sweet spot for all my video and photo editing pairing with my current equipment and files. Also I managed to get everything for an absolute bargain so I'm chuffed it didn't break the bank.
Hello. I come from Vietnam. I don't have much knowledge about computers so I really need your explanation about my problem. Currently I have $1,000 to build a computer configuration to edit TH-cam videos. Video duration is about 1-2 hours. The software I use is mainly Adobe and Capcut. How should I build the configuration? Please give me advice, thank you for reading.
@10:50 You mention MSRP but these cards are almost or over $2000. I think your total price for your system may be a bit skewed if you're only looking at MSRP.
Okay Matt, I just gave you a vehement disagreement on the CPU for your $1K 2022 build CPU, so I think it's fair to hop in & tell you these are good choices for $1.5K. I'd only stress that the video storage should be SSD, External SSD, or internal RAID0 if you want to use spinning SATA hard drives for GB/$$. 1 single 7200rpm SATA drive, internal or external, is not optimum speed & you can hit a wall with a few video streams like multicam editing.
Hello. I come from Vietnam. I don't have much knowledge about computers so I really need your explanation about my problem. Currently I have $1,000 to build a computer configuration to edit TH-cam videos. Video duration is about 1-2 hours. The software I use is mainly Adobe and Capcut. How should I build the configuration? Please give me advice, thank you for reading.
Could you do a build of all these parts? I chose some of the upgrades and am ready to assemble but I don’t want to mess anything up as this will be my first build
LOVE this video! Looking forward to the 2023 update, and would be interested to know if it's possible to build it with MacOS? The ease of airdropping videos to and from my phone to check video/audio quality is so ideal.
I just got a 5950x which is 16 core 32 threads for $630. I saw the benchmarks and the 12900k is slightly faster but nothing noticeable. DDR5 is expensive and as to why I went with Ryzen and early adopting these Intel CPUs is a gamble. Another thing to take into account is that the TDP of at least the 12900k is almost twice of the 5950x which runs way hotter for a small percentage boost. Right now with a 240MM AIO and a slight undervolt, I'm sitting at mid 50s idle to low to mid 70's under load and sometimes climb into the low to mid 80s.
Just bought everything I needed from your link (you're welcome) so I really hope you don't let me down! I plan on editing photos/drone videos and so on..
I know its older video, but just little reminder when buying motherboard - motherboards have RAM limitations some MB can take up to 64gb and some up to 128gb so this is next thing to look for when buying MB :)
Hey Matt, i have been following for a long time and now i'm finally building a PC and needed some help. i was wondering if the MSI PRO Z690-A WiFi DDR4 support the Intel 13th gen 13700k? (since the performance of 13700k is better tha the 12900k and is priced better)
That's wild. Am looking to make a list of things I will need so i can buy them as I can and never now, something like this will run me way over 2k. Thankfully my current laptop (a second hand asus ZenBook from 2015) can still handle the work am doing as I learn how to use premiere pro. Even davinci resolve runs on it but it definitely lags sometimes as I open more intensive windows like effects so I will need to replace it in the near future.
Hi Matt and the rest of you guys! Quick info about my build, I'm a designer who spends most of the time in the Creative Cloud, not really need much storage space, 1TB is more than enough for me since I don't do video editing, cinema 4d stuff, etc. My budget for the build is around 2,500 euros. Currently made up this build so far, let me know what you would improve on it if I missed something: 1 × CPU Cooler Noctua NH-D15 Chromax.Black 1 × Corsair 4000D Airflow Black case 1 × Source be quiet! Straight Power 11 Platinum, 80+ Platinum, 1000W (is this overkill ? not sure how to calculate my wattage, but I don't plan to do any overclocking of any kind / maybe this would be a better option for this build: Corsair RM750x PC Power Supply (Complete Modular, 750 Watt, 80 PLUS Gold) Black) 1 × SSD Samsung 980 PRO 1TB PCI Express 4.0 x4 M.2 2280 1 × ASUS TUF Gaming TUF-RTX3070TI-O8G-GAMING NVIDIA GeForce RTX 3070 Ti 8 Go GDDR6X (I plan to have a dual monitor 4k setup) 1 × Kingston FURY Beast 64GB DDR4 3200MHz CL16 Dual Channel Kit Memory (could go with 36000MHz and CL 18, depends on the price) 1 × Intel Alder Lake processor, Core i7 12700K 3.6GHz box 1 × ASUS TUF GAMING Z690-PLUS WIFI D4 motherboard (any thoughts on this motherboard, did I pick a good one?) Looking forward to hearing your recommendations!
@@whoismatt Didn't expected to get a reply from you man! Appreciate you taking the time to look over my build, I'll get the 1000w to be safe! Appreciate it man and love the videos&channel!
Are you thinking of doing an AMD version? I did follow along one of your videos and had built a phenomenal 4K editing behemoth ...thank you But thinking of upgrading to an 8K camera so would be interested in seeing what I need to upgrade to ensure I can edit 8k :) Cheers and awesome video as per :)
Thanks Tim! I found Intel was a bit cheaper and faster this year so I was recommending their builds. Once amd’s new processors come out We’ll see how they do
Came across another issue with the products working together. The power supply only provides 2 of the 3 VGA wires needed. If u wanna buy those two together u probably will need to buy an extra cord
Iv'e just come across you looking for MB advise, I must say you are very good in fact great and enjoyable to watch. You certainly informed me with what I need to know in a sort of fun way. Regards Tony from Australia
Just found your channel and you give such good info! My question for you is, I notice in your recommendations that you recommend 2x RAM sticks, why wouldn't you use 4x since there are 4 slots?
I know this is almost a year old, but essentially, for 16G, go with 2x8 sticks (8GB each), then when you want to up to 32 G Drop another 2 8GB sticks in at the same speed spec and voila, 32GB and you do not have to replace them all with an appropriate amount anyway, besides, that seems to be how they are sold anyway, 2, 8GB, or 2, 16GB sticks etc., with most motherboards topping out 128GB anyway.
I've had really good luck with GPU notifications on B&H. I picked up a 3070ti a few months ago and just recently picked up a 3090. Nowhere near MSRP of course, but I have them in hand. Now I need to figure out what to do with that 3070ti...
06:38 I got a b550 motherboard and only has 1 4.0 Pcie, the other one is 3.0, what should be better? 1. A single 4.0 ssd for the OS/programs and the editing files 2. OS/programs in the 4.0 ssd and files in a 3.0 ssd? And i guess it could be a 3rd option 3. OS/programs in 3.0 ssd and files in 4.0 ssd What you would think is the best? Thanks!
Awesome video. I just built a beast of a PC. Ryzen 9 5850x with a RTX 3080 and Samsung 980 pro. Sometimes, during playback of 1080/ 60fps from my Sony a73 or 4k/60fps from my GoPro, it skips frames and lags. When I lower the timeline resolution, it helps a lot and much smoother. I know the codecs have to do a lot with it but shouldn’t my gpu be able to shred through the codecs at original resolution? The software im using is Davince Resolve. I also select all clips and hit “Generate Optimized Media”.
Hey man, I got the answer to your question but you’re not gonna like it. Nvidia GPUs do NOT support hardware accelerated decoding of 4:2:2 10 bit h.264/h.265 footage. It doesn’t matter what editing program you’re using because the GPU itself isn’t capable of doing it. So you’re computer is only using the CPU to decode your Sony footage. You can confirm this by opening task manager and checking out GPU usage while playing back in Davinci.
@@SuperCommercialDude oh man! Prob why I was having that issue. I guess the best way is to keep doing the “Generate for Optimized Media” and put it on a 1080p timeline. Damn! Thanks for the answer. I appreciate it
Hi Matt, Thanks for this video. As a fellow TH-camr, I'm interested in building my own video recording/editing desktop. I do have a question, are these specs compatible for Windows 11 OS?
Matt thanks for this! Do you know if i can use a Galax GeForce RTX 3060 (1-Click OC) for this build? It would save me money and it has more gb that the more expensives ones
Thanks for the video! Question to all: I want the fastest computer possible. Is this the way to do it or is there a better computer sold whole already?
I have desktop i7-8700k cpu @3.70ghz 32gb ram Graphic card GeForce RTX 2080. I honestly don’t feel the graphic card, please advice me on a better graphic card to buy for a replacement. I edit 4k, 6k in premiere and Davinci and color grade in both softwares.
Hey Matt, The video is really a help for building a PC. What are ur thoughts on Mac mini m1 chip for Premier or Davinci?. Thank you man u r a saviour matt.
Do you get problems with loud cooling fan noises? I have an older computer that literally sounds like a small plane flying over my head So I have to shut that one off when I do recording. My main computer is much quieter.
Going to accumulate a parts list, luckily I have a pre built I currently use so once I have the rest of the needed parts I'll rip the 64gb of vengeance pro ram and my 3060ti out of it lol
I love these videos. I'll never buy a pre-made again after my last experience. Lots of claims not a lot of actual performance. And deliberate limitations on top of that. I can't use nodes in DaVinci because it only has one graphics card and it's built into the computer in only allows I believe a 4 gig add-on which I don't think will do a whole lot more for it. What's your position on Linux OS?
One of two things you likely did, didn't do any research, bought a lower end turnkey system or something like that as they can be quite strapped for video editing. I'd rather get something from Dell like the Studio XPS and use their configuration and for $1700, bought a more than capable desktop for 1080P editing. At the time, it was the first gen Core i7 processor and had an ATI Radeon discrete graphics card (back when AMD was ATI for graphics). Was able to configure it from Dell. Then in 2019, had to replace that poor old PC and went with a refurbished 6 YO Dell Optiplex small form factor desktop that will just do 1080P with a discrete older lower end graphics card (and will fit and work on the puny power supply) that I had already, meaning for it to be good for about a year before I'd upgrade, however, Covid put all that on hold so now I HAVE to upgrade here fairly soon so am doing research on it now. It'll hopefully be based on the most current processor and DDR5 memory.
Yo, Matt. Any idea if I can upgrade the parts around my CPU to get Real-time playback of the RAW for the C70? CPU is a core i9-9900KF Processor.I know I can jack up my RAM and video card. Just not sure the CPU has the brute force at all.
My computer has i7 8700k and GTX 970 32GB of Ram EVGA NEX 750B PSU Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3200MHz ASUS PRIME Z370-A mobo Camera I have a Sony A7 S3 with 10-bit editing.. I am having to make proxy files to edit.. will this build be a upgrade for me and will it be a huge Improvement?
Upgrading the cpu to a 12 or 16 core would make a big difference in 4K and higher resolution editing. Wouldn’t hurt to upgrade the graphics card too, that 970 pretty old these days.
forgive naivety, but trying to educate myself amidst sea of confusing and conflicting tutorials. what does it mean when amd says it doesn't natively support 10 bit 4.2.2? why do some channels, articles, blogs, endorse intel over amd strictly for this? can anyone in the community please provide some insight or share a resource here? in the initial stages of researching components and unable to find an unbiased clear and concise explanation. any help wud be greatly appreciated. -colton
Matt I’m looking for something around the 2k range. I could build, but would prefer a prebuilt. I’m looking for something that can handle smooth real time play back in 4K. Videos are 10 minutes or less with call out graphics. Anything you would recommend?
Hey Matt, thanks for the great info as usual. So, if we buy the Mac Studio and upgrade to the 2TB SSD, should we consider editing from footage stored on the internal ssd, as opposed to editing from an external ssd, like I usually do?
Damn every TH-camr switching to intel CPUs and team blue. Followed the guide last year for an AMD CPU. Does anyone know if Intel does better with Neat video denoiser than AMD? That can really increase my export time.
Great build…. But you will not be able to find these things for “1500-2000.” These parts are going to run you a lot more. The graphics card alone is $1740 plus tax on Amazon. And availability is still an issue. This is a more expensive build than the title suggests. This is like a 2500$ build atm. I spent 1500$ in person at micro center recently, and ended up with a great build, but I had to go with a little bit weaker graphics card (6600 xt). The other items have all soared in price too, but you can still manage to find them at a reasonable rate.
yeah i did it with the more powerful parts he mentioned for $2700, it would’ve been even more but i had parts from my old computer edit: great build though
I have the newest MacBook Pro 5600 which edits 4k 8k and all that jazz BUT adobe can’t handle 10 bit so it ends up being pretty rough to use. Will this build handle 10 bit 4:2:2 or is that primarily an adobe problem??
The graphics cards have their own memory that comes already on the card itself. (VRAM) This spec has no bearing on which of the two different RAM types for your motherboard choice. Late comment, but also helping explain for future viewers.
😍 Here's a full list of the parts you'll need: kit.co/whoismatt/1500-2000-video-editing-pc-2022-edits-4k-6k-8k-raw-video
P.S. I colored this video with my presets, get them here: whoismatt.com/luts
I’m starting to purchase all the part for 8k video processing, thanks for great tutorial 🙏🏻
Matt God Bless You
Brother
Matt, are you coming out with a new computer build video for 2023? I need to build one soon, so if not, would the parts list be approximately the same from this video? Thx!
I was wondering If the ASUS TUF Gaming GT501 is a good case to get
Love these. I made my editing pc based on one of your other pc build guides and it absolutely slaps
Same here! I love it!
Hello. I come from Vietnam. I don't have much knowledge about computers so I really need your explanation about my problem. Currently I have $1,000 to build a computer configuration to edit TH-cam videos. Video duration is about 1-2 hours. The software I use is mainly Adobe and Capcut. How should I build the configuration? Please give me advice, thank you for reading.
This video is one of the most helpful and complete video I've ever watch. I never even leave comments on videos, but I needed to say this video is AMAZINGA. Thank you so much!
Here's a vote for a video about a more powerful/expensive pre-made computer.
I built a fresh pc last year with the 5900x and 64gb ram, I however couldn't get hold of any reasonably priced graphics cards so had to stick with my 1660ti which was a very capable 4k editing rig. Finally though the price of cards are now back to some normality and I managed to pick up a really good priced 3070, and I think its the perfect sweet spot for all my video and photo editing pairing with my current equipment and files.
Also I managed to get everything for an absolute bargain so I'm chuffed it didn't break the bank.
Hello. I come from Vietnam. I don't have much knowledge about computers so I really need your explanation about my problem. Currently I have $1,000 to build a computer configuration to edit TH-cam videos. Video duration is about 1-2 hours. The software I use is mainly Adobe and Capcut. How should I build the configuration? Please give me advice, thank you for reading.
@10:50 You mention MSRP but these cards are almost or over $2000. I think your total price for your system may be a bit skewed if you're only looking at MSRP.
Hi Matt. Thanks for the excellent videos! Are you planning on doing a 2023 Video Editing Build video... or does the 2022 still apply?
Very much interested in a +$2K pre-built!
What's your opinion on Ryzen Processors?
looking at this in 2023 and alot of the prices have gone down for the DDR5 build thankfully
You hear this all the time but, I love your videos. Clear concise into the point.
Thanks so much
Will the motherboard work with a Ryzen 9 5900X?
Nope, Intel cpu only
@@whoismatt is there motherboard recommendation you have that I can use with this build? The sales on Amazon rn are pretty good for that Ryzen 9 lol
This was so random 😭🙏
Please make the $1000+ pre built computers or if you can recommend a prebuilt for VFX and 4k editing that would be a great help
Okay Matt, I just gave you a vehement disagreement on the CPU for your $1K 2022 build CPU, so I think it's fair to hop in & tell you these are good choices for $1.5K. I'd only stress that the video storage should be SSD, External SSD, or internal RAID0 if you want to use spinning SATA hard drives for GB/$$. 1 single 7200rpm SATA drive, internal or external, is not optimum speed & you can hit a wall with a few video streams like multicam editing.
Hello. I come from Vietnam. I don't have much knowledge about computers so I really need your explanation about my problem. Currently I have $1,000 to build a computer configuration to edit TH-cam videos. Video duration is about 1-2 hours. The software I use is mainly Adobe and Capcut. How should I build the configuration? Please give me advice, thank you for reading.
Everything is out of stock , at this point I will just buy a switch
Great video, be great to see an updated one for 2023!
Could you do a build of all these parts? I chose some of the upgrades and am ready to assemble but I don’t want to mess anything up as this will be my first build
LOVE this video! Looking forward to the 2023 update, and would be interested to know if it's possible to build it with MacOS? The ease of airdropping videos to and from my phone to check video/audio quality is so ideal.
true - my words :D
Hi, any updates for 2023?
What's your opinion of Ryzen? I switched to a Ryzen build last year because I just could not find Intel cpus at the time.
I just got a 5950x which is 16 core 32 threads for $630. I saw the benchmarks and the 12900k is slightly faster but nothing noticeable. DDR5 is expensive and as to why I went with Ryzen and early adopting these Intel CPUs is a gamble. Another thing to take into account is that the TDP of at least the 12900k is almost twice of the 5950x which runs way hotter for a small percentage boost. Right now with a 240MM AIO and a slight undervolt, I'm sitting at mid 50s idle to low to mid 70's under load and sometimes climb into the low to mid 80s.
Just bought everything I needed from your link (you're welcome) so I really hope you don't let me down! I plan on editing photos/drone videos and so on..
Tell me about your experience!!
Hi Matt, would you still use this same setup in 2024? If not will you be doing a 2024 version anytime soon?
If you are going for the higher budget, then I recommend getting the i7-13700K. It cheaper and performs better then the i9-12900K.
Can you please create a 2023 build video? Thank you in advance.
I know its older video, but just little reminder when buying motherboard - motherboards have RAM limitations some MB can take up to 64gb and some up to 128gb so this is next thing to look for when buying MB :)
The cpu's fan isn't actually compatible with the motherboard, so you'll have to get a different one. Otherwise pretty solid build
Hey Matt, i have been following for a long time and now i'm finally building a PC and needed some help. i was wondering if the MSI PRO Z690-A WiFi DDR4 support the Intel 13th gen 13700k? (since the performance of 13700k is better tha the 12900k and is priced better)
wow this was the most helpful guide! btw just qs will this pc build will also run other adobe programs like photoshop after effects smoothly?
That's wild. Am looking to make a list of things I will need so i can buy them as I can and never now, something like this will run me way over 2k. Thankfully my current laptop (a second hand asus ZenBook from 2015) can still handle the work am doing as I learn how to use premiere pro. Even davinci resolve runs on it but it definitely lags sometimes as I open more intensive windows like effects so I will need to replace it in the near future.
Hi Matt and the rest of you guys!
Quick info about my build, I'm a designer who spends most of the time in the Creative Cloud, not really need much storage space, 1TB is more than enough for me since I don't do video editing, cinema 4d stuff, etc. My budget for the build is around 2,500 euros.
Currently made up this build so far, let me know what you would improve on it if I missed something:
1 × CPU Cooler Noctua NH-D15 Chromax.Black
1 × Corsair 4000D Airflow Black case
1 × Source be quiet! Straight Power 11 Platinum, 80+ Platinum, 1000W (is this overkill ? not sure how to calculate my wattage, but I don't plan to do any overclocking of any kind / maybe this would be a better option for this build: Corsair RM750x PC Power Supply (Complete Modular, 750 Watt, 80 PLUS Gold) Black)
1 × SSD Samsung 980 PRO 1TB PCI Express 4.0 x4 M.2 2280
1 × ASUS TUF Gaming TUF-RTX3070TI-O8G-GAMING NVIDIA GeForce RTX 3070 Ti 8 Go GDDR6X (I plan to have a dual monitor 4k setup)
1 × Kingston FURY Beast 64GB DDR4 3200MHz CL16 Dual Channel Kit Memory (could go with 36000MHz and CL 18, depends on the price)
1 × Intel Alder Lake processor, Core i7 12700K 3.6GHz box
1 × ASUS TUF GAMING Z690-PLUS WIFI D4 motherboard (any thoughts on this motherboard, did I pick a good one?)
Looking forward to hearing your recommendations!
Build looks good! Get either that 1000W or an 850W psu. Not positive 750 would be enough. Otherwise great
@@whoismatt Didn't expected to get a reply from you man! Appreciate you taking the time to look over my build, I'll get the 1000w to be safe! Appreciate it man and love the videos&channel!
Are you thinking of doing an AMD version?
I did follow along one of your videos and had built a phenomenal 4K editing behemoth ...thank you
But thinking of upgrading to an 8K camera so would be interested in seeing what I need to upgrade to ensure I can edit 8k :)
Cheers and awesome video as per :)
Thanks Tim! I found Intel was a bit cheaper and faster this year so I was recommending their builds. Once amd’s new processors come out We’ll see how they do
Yes please make the video about pre built over 1000
quick question: that memory is DDR5 5600 while the motherboard shows a standard of DDR5 4800. does that matter?
Time stamps are mismatched. Kindly rearrange them
Matt i need you help! i want to know what i need for my pc to make it run better. not sure what i am missing. willing to fix majority
Came across another issue with the products working together. The power supply only provides 2 of the 3 VGA wires needed. If u wanna buy those two together u probably will need to buy an extra cord
Iv'e just come across you looking for MB advise, I must say you are very good in fact great and enjoyable to watch. You certainly informed me with what I need to know in a sort of fun way. Regards Tony from Australia
Excellent video! Thanks, Matt!
now way you'll find 3080 or 3090 for the prices you mentioned.
Just found your channel and you give such good info! My question for you is, I notice in your recommendations that you recommend 2x RAM sticks, why wouldn't you use 4x since there are 4 slots?
so you can upgrade when needed
I know this is almost a year old, but essentially, for 16G, go with 2x8 sticks (8GB each), then when you want to up to 32 G Drop another 2 8GB sticks in at the same speed spec and voila, 32GB and you do not have to replace them all with an appropriate amount anyway, besides, that seems to be how they are sold anyway, 2, 8GB, or 2, 16GB sticks etc., with most motherboards topping out 128GB anyway.
The answer you might be searching for: 2 sticks of Memory have higher IO then 4 sticks.
Are you sure about the ram? I think the DDR4 in this Video is faster then the DDR5
Thanks for the useful information about pc build :)
Graphics card vram matters for content creation i `am confused between 3060 12GB vs 3060 ti 8GB pls share ur thought thanks you.
I've had really good luck with GPU notifications on B&H. I picked up a 3070ti a few months ago and just recently picked up a 3090. Nowhere near MSRP of course, but I have them in hand. Now I need to figure out what to do with that 3070ti...
Bet someone in the comments will buy it 😂😂😂
Wow, how much do you want to sell it if you want to sell it. But the price will be absurd if plus with shipping fee to Malaysia 😫.
i built the $750 build, im wondering if i can just upgrade the cpu
Very useful. big thank you from Italy
06:38 I got a b550 motherboard and only has 1 4.0 Pcie, the other one is 3.0, what should be better?
1. A single 4.0 ssd for the OS/programs and the editing files
2. OS/programs in the 4.0 ssd and files in a 3.0 ssd?
And i guess it could be a 3rd option
3. OS/programs in 3.0 ssd and files in 4.0 ssd
What you would think is the best? Thanks!
Awesome video. I just built a beast of a PC. Ryzen 9 5850x with a RTX 3080 and Samsung 980 pro. Sometimes, during playback of 1080/ 60fps from my Sony a73 or 4k/60fps from my GoPro, it skips frames and lags. When I lower the timeline resolution, it helps a lot and much smoother. I know the codecs have to do a lot with it but shouldn’t my gpu be able to shred through the codecs at original resolution? The software im using is Davince Resolve. I also select all clips and hit “Generate Optimized Media”.
Hey man, I got the answer to your question but you’re not gonna like it. Nvidia GPUs do NOT support hardware accelerated decoding of 4:2:2 10 bit h.264/h.265 footage. It doesn’t matter what editing program you’re using because the GPU itself isn’t capable of doing it. So you’re computer is only using the CPU to decode your Sony footage. You can confirm this by opening task manager and checking out GPU usage while playing back in Davinci.
Here’s a link to a list of codecs Nvidia GPUs support. en.m.wikipedia.org/wiki/Nvidia_NVDEC
@@SuperCommercialDude oh man! Prob why I was having that issue. I guess the best way is to keep doing the “Generate for Optimized Media” and put it on a 1080p timeline. Damn! Thanks for the answer. I appreciate it
@@SuperCommercialDude wait. I just took a look at the list and the rtx 3080 does support those codecs
Let me know if I’m reading that wrong. Looking under the GPU support and 3080 is towards the end.
Thank you for the video 👍👍
Hi Matt,
Thanks for this video.
As a fellow TH-camr, I'm interested in building my own video recording/editing desktop. I do have a question, are these specs compatible for Windows 11 OS?
Yes
Would this computer be good for gaming as well? I want an editing system that can also game.
Matt thanks for this! Do you know if i can use a Galax GeForce RTX 3060 (1-Click OC) for this build? It would save me money and it has more gb that the more expensives ones
Hi, how would this change now in 2024
What about a 12900kf with a rtx 4060 ti with 16gb ddr6?
What about recommending a case capable of holding 8+ 3/5" HDD for RAID 5 configuration?
Hey like your previous videos.. but what happened to the desktop that we see in the thumbnail of this video?? Was intrigued because of that one ..
Thanks for the video! Question to all: I want the fastest computer possible. Is this the way to do it or is there a better computer sold whole already?
I have desktop i7-8700k cpu @3.70ghz
32gb ram
Graphic card GeForce RTX 2080.
I honestly don’t feel the graphic card, please advice me on a better graphic card to buy for a replacement.
I edit 4k, 6k in premiere and Davinci and color grade in both softwares.
Hey Matt, The video is really a help for building a PC. What are ur thoughts on Mac mini m1 chip for Premier or Davinci?. Thank you man u r a saviour matt.
Hey thanks! Watch my prebuilt video editing pc guide, I talk about the m1 at the end
So I got the ddr4 wifi but I'm having trouble connecting my wifi wirelessly. Are there any extra steps I need to take? I have my antennas on as well.
Do you get problems with loud cooling fan noises? I have an older computer that literally sounds like a small plane flying over my head So I have to shut that one off when I do recording. My main computer is much quieter.
Thanks for this awesome video. 🔥🔥
make an updated version
Update da ddr5 Corsair went down in price I just copped what you talked about for 250$
Nice video! Will we see graphics cards drop in price anytime in the near future, or will they only go up from here?
I think prices will drop once supply chain issues get sorted
can i go for MSI MAG z690 tomahawk DDR5 motherboard insted of the ones in the video
Going to accumulate a parts list, luckily I have a pre built I currently use so once I have the rest of the needed parts I'll rip the 64gb of vengeance pro ram and my 3060ti out of it lol
I have a gtx 1660 and ryzen 7 2700 so what cost affective upgrade could I get?
Matt which would be a good opticon for a CPU from AMD instead of one from Intel? Thanks bro nice build!!
Ryzen 5900x
I love these videos. I'll never buy a pre-made again after my last experience. Lots of claims not a lot of actual performance. And deliberate limitations on top of that. I can't use nodes in DaVinci because it only has one graphics card and it's built into the computer in only allows I believe a 4 gig add-on which I don't think will do a whole lot more for it. What's your position on Linux OS?
One of two things you likely did, didn't do any research, bought a lower end turnkey system or something like that as they can be quite strapped for video editing. I'd rather get something from Dell like the Studio XPS and use their configuration and for $1700, bought a more than capable desktop for 1080P editing. At the time, it was the first gen Core i7 processor and had an ATI Radeon discrete graphics card (back when AMD was ATI for graphics). Was able to configure it from Dell.
Then in 2019, had to replace that poor old PC and went with a refurbished 6 YO Dell Optiplex small form factor desktop that will just do 1080P with a discrete older lower end graphics card (and will fit and work on the puny power supply) that I had already, meaning for it to be good for about a year before I'd upgrade, however, Covid put all that on hold so now I HAVE to upgrade here fairly soon so am doing research on it now. It'll hopefully be based on the most current processor and DDR5 memory.
Yikes, just went through and put all of these into Amazon , and its $3000+
Im having trouble fitting the 3080 Geforce into the case you linked. Are the two not meant to be together?
Can you do the SSD Sn850x instead of the normal 850?
Thanks You so much, love ya
Yo, Matt. Any idea if I can upgrade the parts around my CPU to get Real-time playback of the RAW for the C70? CPU is a core i9-9900KF Processor.I know I can jack up my RAM and video card. Just not sure the CPU has the brute force at all.
the nh u9s will not be enough
My computer has i7 8700k and GTX 970 32GB of Ram EVGA NEX 750B PSU Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3200MHz ASUS PRIME Z370-A mobo
Camera
I have a Sony A7 S3 with 10-bit editing.. I am having to make proxy files to edit.. will this build be a upgrade for me and will it be a huge Improvement?
Upgrading the cpu to a 12 or 16 core would make a big difference in 4K and higher resolution editing. Wouldn’t hurt to upgrade the graphics card too, that 970 pretty old these days.
Doesn't work! The graphics cards are not available because of mining and scalpers.
forgive naivety, but trying to educate myself amidst sea of confusing and conflicting tutorials. what does it mean when amd says it doesn't natively support 10 bit 4.2.2?
why do some channels, articles, blogs, endorse intel over amd strictly for this?
can anyone in the community please provide some insight or share a resource here?
in the initial stages of researching components and unable to find an unbiased clear and concise explanation.
any help wud be greatly appreciated.
-colton
Matt I’m looking for something around the 2k range. I could build, but would prefer a prebuilt. I’m looking for something that can handle smooth real time play back in 4K. Videos are 10 minutes or less with call out graphics. Anything you would recommend?
Buy a base level mac studio 👍
Good video!
I have AMD 5900X, 64g 3600Mhz, Asus Strix 570X-F Gaming, Noctua 15. Should i upgrade to Intel latest?
Nah you won’t see a big improvement
@@whoismatt Thank you for your answer.
Hi mate, I have to get 8k pc built, I am based in Australia..any suggestions. Thanks mate
Hey Matt, thanks for the great info as usual. So, if we buy the Mac Studio and upgrade to the 2TB SSD, should we consider editing from footage stored on the internal ssd, as opposed to editing from an external ssd, like I usually do?
Yes I would edit internally if you can, as the internal ssd is much faster. Don’t forget to make backups often
@@whoismatt Makes sense, thank you! Hey, have you done any videos on the Apple Studio Display, and if it's worth it, compared to other displays?
If you buy that you deserve everything bad that happens to u.
Damn every TH-camr switching to intel CPUs and team blue. Followed the guide last year for an AMD CPU. Does anyone know if Intel does better with Neat video denoiser than AMD? That can really increase my export time.
I guess he was right water cooling is cool cause that what I got🤣
Great build…. But you will not be able to find these things for “1500-2000.” These parts are going to run you a lot more. The graphics card alone is $1740 plus tax on Amazon. And availability is still an issue. This is a more expensive build than the title suggests. This is like a 2500$ build atm. I spent 1500$ in person at micro center recently, and ended up with a great build, but I had to go with a little bit weaker graphics card (6600 xt). The other items have all soared in price too, but you can still manage to find them at a reasonable rate.
Click bait. We’re all here like moths to a flame. 🤤🤣
yeah i did it with the more powerful parts he mentioned for $2700, it would’ve been even more but i had parts from my old computer
edit: great build though
And here we are 1 year later and I'm buying 5700xts for $150 each 🥴
Yes click bait, instead of bikini babes he gets us with pc prices
Now that’s sinister
Here I am in 2023, bought it for $1980 with some upgraded parts.
Thanks for this video! Does anyone know what what graphics cards are compatible with Premiere Pro CC 2018?
Premiere is pretty darn compatible, as long as it is not a super low end card it should work great
I9 went down by a little grabbed mine at 599
What will be changes if I want to go with Icore9?
I have the newest MacBook Pro 5600 which edits 4k 8k and all that jazz BUT adobe can’t handle 10 bit so it ends up being pretty rough to use. Will this build handle 10 bit 4:2:2 or is that primarily an adobe problem??
someone answer this question. This is what i need to know
So with the Bitcoin / crypto world tanking guess what. Most of these graphics cards are just about MSRP and usually in stock
maybe re think buy second hand graphics card maybe have a problem editor for video on the long waY
i thought that the rtx 3060 12GB was better than rtx 3060 Ti 8GB for productivity:0
Motherboard: MSI MPG X570 Gaming Edge Wifi
CPU- Ryzen 3700X
Ram- Corsair RGB Pro 4x16gb 3600 mhz
Storage
Samsung - 860 EVO 500GB SATA 2.5" SSD
SAMSUNG (MZ-V7S1T0B/AM) 970 EVO Plus SSD 1TB - M.2 NVMe Interface
Samsung - 970 EVO Plus 500GB PCIe Gen 3 x4 NVMe Internal Solid State Drive
And several Samsung 1tb T5’s
Graphics: EVGA RTX 2070 Super Ultra XC
Power- CORSAIR - RMx Series 850W ATX12V 2.4/EPS12V 2.92 80 Plus Gold Modular
resolve need 24gb for 8k
Hvala!
Love these!
Love y’all and your music!
@@whoismatt You're killing it, Matt-as per usual.
Hey Matt - thanks for the video. Any issues with the AMD Radeon RX 6650 XT Graphics Card with 8GB GDDR6 on this MSI motherboard with the Intel i9?
6650 is pretty underpowered. Which i9?
@@Harigan I ended up going with the Intel I7-12700K and the Nvidia RTX 3080
@@mattkirstein that's much better! I hope you like it.
Hey Matt, the graphics card you mentioned for ddr4 motherboards are ddr6 Cards. Are they compatible?
Yes
The graphics cards have their own memory that comes already on the card itself. (VRAM) This spec has no bearing on which of the two different RAM types for your motherboard choice. Late comment, but also helping explain for future viewers.