How to CREEP TUNE - PRECISION BOW TUNING
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- CREEP TUNE ARTICLE : www.archerytal...
BEEREAL MERCH - beerealmerch.com
ULTRAVIEW - bit.ly/ultravi...
SAVE 10% ON MAGVIEW CODE: BEEREAL - magviewgear.com/
SHOP LANCASTER ARCHERY SUPPLY - lancasterarcher...
Check out my PODCAST - apple.co/3vyQ6JP
INSTAGRAM - / chrisbeereal
My CAMERA Gear:
My MAIN Camera - rb.gy/nzanez
My Favorite Mic - rb.gy/vbl1vn
My VLOG Lens - rb.gy/5pk6eg
Best DO-IT All Lens - rb.gy/klx2x5
Best Hunting Lens - rb.gy/wvwxan
Audio Recorder - rb.gy/5pklm2
Other Gear
Editing Laptop - rb.gy/jps8mn
Editing Software - rb.gy/pwwuo9
Best Action Cam - rb.gy/w302ih
Camera Case - rb.gy/ie3n8l
Best Beginner Camera to Film Hunts - rb.gy/j902od
It’s all ways a good day when Chris’s Bee uploads
Sure is!
So True!
the best upload notifications ever
👌🏻
What did you actually do tweeking ? The full twist was to much the half was no go then the quarter twist was shooting high what else was there to do ? You just said you tweeked but what did you tweek from the 1/4 twist to rectify the problem?
Well one thing is for sure this is above my pay grade but I really enjoy when you share some knowledge about archery I’d like to see more of it
Do you work at McDonald’s?
You have to be such a consistent shot to not drive yourself nuts doing this
Mind sharing more about the new grip?
I was gonna ask too. Looks awesome
You make the best content in the archery community honestly
Chrisbee! Not confusing at all - thank you for a great tip! The timelock feature on my BowTech will make this so easy! Thanks for that! 🐝 BeeReal!
Oh! Never thought about that!
The “In Time” system from conquest/black eagle is pretty handy for this. Especially on the Mathews bows.
You beat me to it Mike! Yes, that system would do precisely what Chris is describing in terms of "micro" adjusting the timing......
Not to be rude, but if you're shooting softball sized groups at 20 yards, there are a lot of other things to work on that will help you tighten up your groups more than creep tuning. I'm not denying that creep tuning works, but I'm convinced from watching this that it's a waste of time for beginning and intermediate archers. Still gave it a thumbs up because presentation was o point.
Thank you for doing this lot of people need to know this stuff it man I'm proud of you buddy you really got an audience behind you now
Why do you look at your top cam before anchoring? Would love to know
Great tip, Chris!
APA Archery's Micro Tune is great for performing this with no tools, cam lock, or bow press.
I wanna know why I do t see people asking about the new grip in this vid.. 🧐 great tutorial btw! Thanks for it
I saw that to I looked on the uv website and I didn’t find it r they just not released yet
Cant wait for Utah TAC met you last year hope to run into you there again! Love the videos they’ve helped my shot process a ton!
When will the new style grips that's on your bow be available?
Are we gonna talk about the grip? 3.45!
Hey Chris, really enjoy these bow tech tip videos. I have been wanting to learn how to creep tune! Thanks
Jesse broadwater talked about group tuning. I was hoping you could do a video on this. Essentially for the same reasons you mention about creep tuning. Most forgiving bow setup possible.
Lol I’m 62 years old starting shooting competition archery in 1987 me and the guys I shoot with have been doing this type of tuning for 25 years but great video
Great video as usual Chris, that new grip looks sweet! When will they be available for purchase?
Chris do you have the 12 inch stab on the front and 10 inch on the back? Looks like 5 ounces on the back how many ounces on the front?
I use the in time spacers with a draw board and cables hit the same exact time. Should I still do a creep tune?
I like that grip you got on it when can we get one
Is that the new ultraview grip?
Excellent video Chris 🐝
Interesting grip
great content . i love these kind of videos. thanks Chris
What do you look up at when you draw back?
God
Very interesting. Have never heard about creep tune before. However, I doubt I could do it, especially because I shoot back tension release. Well of course in theory you could creep the shot off, perhaps setting the release to a lower poundage, but I am almost sure that would give very sloppy shots. But as Chris says, it is difficult to make a good shot while creeping.
Thanks for the helpful advice chris
I can’t wait to see you at nationals. I hope you can sign my hat.
Nice grip!
If I set any Mathew’s up with the bottom fast I was in for a ride, my pin went from nice and slow to someone come help me hold this thing still! I could get away with the top being a touch fast for spots. But it always just made sense to set them the same and forget ever creep tuning😂
Awesome video Chris thanks for the info. Is that the new grip that’s getting released on Friday ?
You talk about hitting center, but before you do this, do you nock tune / spine index the arrows to make sure that is not what is affecting shot placement?
Cool vid mate..thanks for the lesson..I'm gunna try that..👍.
Good stuff sir!
Trying to get into archery, but have no idea what I’m doing lol
How'd you see 50 + yard shots. Do you use magnifier and if so what about peep?
will you be at oklahoma tac perchance would love to meet you
Chris out here tweakin' and creeping'.......
It was hard to tell whether you’re shooting the 29” or the 33” Phase 4. Which one is it? Either way it’s definitely very quiet?
Any video of you at Foley asa shoot
What is that bow grip? Looks amazing
Does Mathews bow have a life time warranty ?
What’s the new grip…
Interesting video, thanks! Looks like I need a bow press to mess with this this technique. What press do you use or recommend for a Mathews Halon bow?
when do the new grips drop?
Do you have bows you don't shoot?
Is that the new grip?
Are you shooting the asa's this year?
New uv grip you got there?
Love the vids
I've done creep tuning shooting bareshafts through paper at 6-7 yards. Fletched won't be sensitive enough. It does seem to add forgiveness when shooting broadheads at steep angles.. maybe it's just me but at some point you're so twisted up shooting downward you just don't get the same tension in the back wall as normally. So maybe it isn't as irrelevant even these days
Why are you twisted? Just bend at the waist.
@@russelllangworthy8855 think steeper
@@smau990 You can’t get any steeper than straight down.
New grip??
We're the mullet 🥺
Great video as always! I recently got a Mathews triax. I'm shooting a hinge release. When I reach full draw, and remove my thumb from the thumb bar, my peep and sight come out of alignment making it difficult for me to see through my sight. Do you know how I can fix this, or what is causing this?
That depends on the direction of the alignment.
Without any other info: it's probably more to do with your anchor points. The distances between the corner of the string, the peep, and the back of your hand might change based on how you hold the release. If you hold the release too close to the palm, or fold your fingers over too far while drawing back, when you remove your thumb you'll add more tension to your fingers and straighten out your hand.
You likely set up your draw length, peep height, sight alignment, etc etc at your most stable position, which would be with your thumb on the bar. Adjust your hinge to require WAY more travel than you can practically activate, and readjust your bow. The goal is to hold the release at just before your ideal activation angle, and have that your new baseline. Then you can reset your release and test it out.
Hope it helps!
"It's in this article, link down below!"
Always forgets the link
I wonder if he ever wonders if he actually has a best bow. Love seeing what all the free agents shoot
Love your videos Chris, but this one seems extremely not necessary. You’re tweaking your bow just in case you have a bad shot. So you’re basically setting your perfectly set up bow up for when you shoot a bad shot, instead of focusing on making the exact shot over and over, which is the challenge of archery.
Hunting situations change a Lott of the forms of archery.
@@mitchellpisarzewski194You mean because of heavier clothing, etc?
@@russelllangworthy8855 not necessarily but yeah that can add a factor to it. I mean being wrapped around a tree trying to get a shot on a deer in a real world situation
So in conclusion, creep tuning will make your timing off and you learn to go back to your proper timing setup. Huh
Chris can I get a flag.ship what is 25 drawl length? It seems like they only come in a 25 minute half that’s where it starts at is there anyway I could she a half inch
First like baby
Can anyone explain shooting a button release, or release in general to me. He says to push and pull but I never understand what he means by that… push and pull off of what
Pushing his bow arm forward and pulling his release hand back
Looks pointless to me
what if your end loops are served no 1/4 turns id think...
That is where the In Time Cam Timing System by Conquest would be a must. It is designed specifically for micro adjusting cam timing....
With Mathews you can add twists in the loops that hold the yoke
When using a rangefinder, depending on your arm length, you could be a full yard off from your eye to where the tip of the arrow is…
Doesn’t matter when you’re using sights.
You make the best content in the archery community honestly
Love the vids
Is that a new UV bee real grip prototype?
We're the mullet 🥺
So.. You start off with top cam hitting slightly before the bottom. Fair enough starting point. Creep, go high. Adding half a twist, further speeding up the top cam. Going back to "quarter" twist, still a tad high, and still top cam before bottom..
Out of interest: Did you at any point consider going the other way, starting at a perfect synch? Maybe it wouldn't even make a difference?
Can't see this bringing a lot into a modern setup, but sure, nice experiment.
That grip is 🔥 let us know when they’re dropping!
Ok, ok…Through the window, around the truck and off the rock! Nothing but line….😁👊🏻🏹
Do you have any videos discussing your thoughts on straight, offset, and helical?
How out of time was final setup?
Twisting the end loop on the cable a game changer
I thought that in order to creep tune you had to find a “creep”
What binos are you using?
Is there a reason you look at the top cam as you anchor
yolo.
Which HHA sight is that ?
Nice grip…..
New grip?
Awesome
Thank u for all hard work put in videos and the free knowledge Iv lurned more from u than anyone the real deal bow tec right here
A video with one of the Mathews guys would be cool to hear about some shop techniques how they tune the bows during testing, what they’re looking for, etc. I tried that 1/4 turn and didn’t think it did anything, but I did notice micro movements with yoke tuning of the 1/2 turns were too much in the main line. Seemed like the yoke was more of a true 1/4 based on the 2 points of connection.
Great video. Possible relaxing toward creep causing peep sight height to vary? Causing high arrows.
Awesome video I slowly collecting 3d targets for a shoot w/ the local school so far I got 12 like you vids helps me feel more confident 👌
Super helpful video makes me wanna go double check mine since my arrows have been flying funny
Great video Chris!
Great vid would like to see a collaboration with you and Elk Shape love both of your vids.
Super happy to see this type of content!!! Please keep it up my friend.
Is that a custom grip or can you buy that exact grip from UV?
Peep the new grip.. Right after I bought the old one.. ha
We need to see an elkshape collab at tac! That’s be awesome!
So true
That would be awesome 😎
Learn something everyday..nice vid
Chris, I learn so much from you and your videos.
It's a Chris BEE DAY!
Love the videos Chris
Hey Chris love your content keep it up.
Good stuff 👍