As a industrial mechanic in the United States. I can say without a doubt that is a professional retread job! Hard working men doing a difficult job! Here we wouldn't do that! Well done gentlemen! 👏! Bless you for your hard work! Supporting your family with honor!
Zum einen bin ich absolut Begeistert das es möglich ist, aus mehreren alten defekten Reifen, einen ganzen funktionsfähigen zu machen. Auch wenn diese Arbeit auf den ersten Blick etwas beschwerlich erscheint, so führt sich doch zum Ziel. Dafür : 👏👏👏👏👏 Ob ich jedoch einem solchen Reifen mein Leben anvertrauen möchte, kann man nur durch das ansehen des Videos nicht so ohne weiteres Entscheiden. Vermutlich werden Reifen dort so repariert, weil es keine oder kaum neue gibt, zum anderen werden die meißten nicht das nötige Geld haben um neue zu kaufen. Wenn meine Vermutung zutrifft, steigt mein Staunen über diese harte Arbeit noch sehr viel mehr. TOLL 👍👍👍👏👏👏👏
@@meta0269 How are they dangerous? Tractors generally don't go any faster than 30 MPH, and it looked like a fairly competent retread. Do you know what percentage of American trucks run on retreads at 100+ miles an hour?
I just had a retread put on my reefer last week…. I drive 65-70 mph every day. Most tires fail from running flat or from locked brakes causing flat spots. Rarely see tread separation except from running low inflation. Retreads are illegal on steer tires but probably would be safe at lower speeds. You don’t ever risk a wild ride from a steer tire failure.
U should never use retreads what the point to save a few dollars but they might not save your life really what's the point my tires cost 250 dollars each
Proper "Cold" retreading is actually done with heat (100 -110C) so this retreading process is questionable but if the tread stays on in a low speed agricultural application I suppose it works for their purpose. Safety and working conditions are abysmal but that's what comes with lots of cheap, available labor.
that big plate that they put the tire on near end that puts a lot of pressure down is being heated underneath for 12hrs. I'm sure that heat is traveling thru and getting to that welding agent to melt properly I don't think they're that dumb.
If they do this for a long time it works, dont expect similar quality like its a brand new tire, rethread is a rethread so you get what a rethread is. Good job, reusing old tires instead of just dumping.
I laugh at comments from non Asian Countries..These guys "work hard" whrere as MOST other Countries out of Asia are just Part replacement ppl .Give credit where credits due...Good job well done..
As impressive as this video is, the person grinding the rubber is going to suffer later in life. ` Breathing in all that rubber dust will eventually kill him. he should be wearing a proper mask. I guess thats where health and safety at work laws we have in the uk are designed to protect employees from such health hazzards. Tell your boss you need safety masks, that rubber dust will kill you.
Please make documentary type of video ,so people not only watch but understand the resole or rereading process. Unless and until u speak at each stage ,how the message of good rereading to reach the viewers. Secondly u ade just silent on ingredients which again a crucial part of whole video. I think speaking with actual process wd make yr video more interesting and successful
It's amazing what can be achieved by hard work and exploitation. Great work men, pity you're probably not being paid a tenth of what you're worth. No wonder an amount of the Indian people end up in scam call centres.😥😥😥
Вот по-любому у него к врачу с ноздрей торчит кусок покрышки 🤣работает без маски 🤦♂️. И я бы лучше на ступице делал , так бы точнее посадить протектор.
@@dimapool7674 it's work amazing same as new tyres but these tyers are 50% cheaper than new that's why Pakistani drivers using these tyers and one more thing no body is fool every one knows what is good and what is bad for them
Ничего нового. Мне 12 лет было и я в 1994 году устроился в шиномонтажки работать. Покрышки у нас тоже наваривали тогда. Я,правда,в легковой шинке работал
There’s nothing wrong with the way they done it , they done it the manual way as they don’t have the machinery to do it the expensive way but that tyre will have no issues
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 4](http://i.ytimg.com/vi/e7Oqqo90x_w/mqdefault.jpg)
As a industrial mechanic in the United States. I can say without a doubt that is a professional retread job! Hard working men doing a difficult job! Here we wouldn't do that! Well done gentlemen! 👏! Bless you for your hard work! Supporting your family with honor!
Insane and dangerous !
Not insane, not dangerous because everything is done in a professional way.
many respekt to your anwer...you are right...we do the same job, but on other way...
Bravo à toute l'équipe.
عمل متقن و لا أروع. كل التقدير و الإحترام لكل العاملين.
أخوكم من المملكة المغربية.
As a licensed and certified tire grindologist I'd like to point out that he should have been going in a clockwise pattern at 26:05.
Good job 👍👍👍👍🇵🇰
Н..и..х..у..я не good
Zum einen bin ich absolut Begeistert das es möglich ist, aus mehreren alten defekten Reifen, einen ganzen funktionsfähigen zu machen. Auch wenn diese Arbeit auf den ersten Blick etwas beschwerlich erscheint, so führt sich doch zum Ziel. Dafür : 👏👏👏👏👏
Ob ich jedoch einem solchen Reifen mein Leben anvertrauen möchte, kann man nur durch das ansehen des Videos nicht so ohne weiteres Entscheiden. Vermutlich werden Reifen dort so repariert, weil es keine oder kaum neue gibt, zum anderen werden die meißten nicht das nötige Geld haben um neue zu kaufen. Wenn meine Vermutung zutrifft, steigt mein Staunen über diese harte Arbeit noch sehr viel mehr.
TOLL 👍👍👍👏👏👏👏
Imagine grinding rubber all day in 100+ degree heat, bent over, no filter masks, no dust removal, no ventilation, I wonder how long these guys live.
30-35
@@mihail840 What a waste of human potential, eh? These guys do some amazing work with primitive tools and working conditions.
@@Lumby1 not really all they do is scam people with dangerous tyres.
@@meta0269 How are they dangerous? Tractors generally don't go any faster than 30 MPH, and it looked like a fairly competent retread. Do you know what percentage of American trucks run on retreads at 100+ miles an hour?
@@Lumby1 Do you know how many countries they are illegal in for good reason.
Saya,,,,,suka sama kepribadian seseorang yang mempunyai imajinasi tingkat tinggi (powerrr full) selamat berkarya,,,,,,trims.
Very amazing work
Neden bilmiyorum ama bu tarz videoları son saniyesine kadar izliyorum. Sanki, bir çeşit terapi gibi. Çok ilginç! 😅
I like your idea 💡
I just had a retread put on my reefer last week…. I drive 65-70 mph every day. Most tires fail from running flat or from locked brakes causing flat spots. Rarely see tread separation except from running low inflation. Retreads are illegal on steer tires but probably would be safe at lower speeds. You don’t ever risk a wild ride from a steer tire failure.
U should never use retreads what the point to save a few dollars but they might not save your life really what's the point my tires cost 250 dollars each
Great job guys, I wish we had shops like this in Canada, but no one would be willing to work this hard.
Not sure what you're on about. Retreaded tractor tires are very much a thing in Canada.
you must be kidding. men do it out of poverty. Do you think there's a need for something like this in Canada, dummy!
Let me work for you
'Cause it isn't safe... maybe
@@infectedspeedmx Nope, people to Damn Lazy.
Ale to jest technika 😌🙋♂️
Incredible! Fantastic!
Mantap teknik sangat profesional 👍
And music makes it as a strangelite videos,thank you!.
Congratulation very good work
Well came to Kazakstan🤗👍
Proper "Cold" retreading is actually done with heat (100 -110C) so this retreading process is questionable but if the tread stays on in a low speed agricultural application I suppose it works for their purpose. Safety and working conditions are abysmal but that's what comes with lots of cheap, available labor.
Their busniess has long been closed if the job not done effectively..
@@arifmantias8216 Pretty much what I was expressing, it’s good enough for a tractor
that big plate that they put the tire on near end that puts a lot of pressure down is being heated underneath for 12hrs. I'm sure that heat is traveling thru and getting to that welding agent to melt properly I don't think they're that dumb.
Hard dangerous work!!!
Ну на трактор и прочие неторопливые транспортные средства пойдет. Уверен, что служить будет долго.
If they do this for a long time it works, dont expect similar quality like its a brand new tire, rethread is a rethread so you get what a rethread is.
Good job, reusing old tires instead of just dumping.
I like the red steel toe flip flops at the end 🥾
Jozzz gamdozzz mas bro...
Эффективные менеджеры 👍😂
That kid will work !
Я смотрю, у чувака явно запасные лёгкие дома лежат
Он дышит через раз😉
فيديوهاتك اتابعها لآخر ثانيه مدري ليش 😂😂😂😂😂😂
Parabéns muito profissional espetacular 🇦🇫👍👍👍👍
Fred Flintstones nephews. 3 mph rated around Bedrock metropolis.
very nice job
Tire guys.. no matter where in the world they are their hats are always backwards!! Lol!! 👍
As an Australian tyre fitter I have to call you out on that, never have never will wear my hat backwards
@@incompetentinquisitor3667
Call me out on what it was a joke !
Always like your hard work attitude stay safe out there bro regard
❤ brother please use dust mask and safety glass.
Your almost as pretty as me.
I love you my beautiful love🌷💖💘💝😘😘
I laugh at comments from non Asian Countries..These guys "work hard" whrere as MOST other Countries out of Asia are just Part replacement ppl .Give credit where credits due...Good job well done..
Eye wear protection, and face masks necessary against flying dust particles.
Man, that dude's hands are like a sewing machine
In indonesia this technique called “vulkanisir ban”, common in truck tire but this is bigger tire awesome
When you are running late on a meeting with your god use these tires you will be there on time 👍🏻
No breathing mask, no vents, no ear plugs... shame that those crafty guys will not live long enough.
Nice,
Love to see him using invisible goggles and respirator
Have you ever actually had to do hard work to support your family? Your comment seems to indicate no.
@@ShadowsOnTheScreen If you want to take good care of your family, you should take good care of yourself. An ill father can't feed his children.
Without question a better job then could be expected under the circumstances. And at substantially less cost I’m sure.
Столько часов работы и материалов потратили и намного дешевле покупки новой шины ?
Столько ручного труда, столько газа для вулканизации,и качество на выходе вероятно всё равно не очень... неужели это выгодно?
Man you guys could make dollars over here in N America fixing tractor tires with stubble rash, good sidewalls but cord showing by the cleets.
La espalda está sufriendo amigo ten cuidado un saludo 👋
Молодцы
Might work for something slow like a tractor, but I'd never put retreaded tires on my car xD
I give it 16 days at 16PSI at 16MPH. Tops.
Tractors at 16 mph? 😀😀😀
You know shiit, bud.
Lol you not a farmer are you
Looks like its gonna wobble!
I'd say near perfect 👌 likely better then our New ones
I still prefer low profile tires on my tractor 🚜
i like the healthy jobs there and these fake tires.
no conocen la escoba para barrer trabajarían mejor 🚜🚜🚜o entre mas tierra mejor queda la llanta
They have to be a easier way !!
Интересно) откуда у них ЗИЛовский компрессор?))
Сколько зарабатывают эти люди, с одного такого колеса ? А так норм..
Рабочие На еду !!!!
И тапки
The guys at Bandag retreading are gonna laugh.
These guys know their stuff, but probably none of them will ever live past their 60s
Most of us won’t anyway.
I feel sorry for his/ theirs lungs, rubber dust sticks allover, poor people...poor work conditions...😔😔
How dare u assume there pronouns
Two chapatis and a half eaten Keema Naan where used for the balancing.
"Dam, I put it on backwards!"
As impressive as this video is, the person grinding the rubber is going to suffer later in life. `
Breathing in all that rubber dust will eventually kill him. he should be wearing a proper mask.
I guess thats where health and safety at work laws we have in the uk are designed to protect employees from such health hazzards.
Tell your boss you need safety masks, that rubber dust will kill you.
Fuck off we don't need your instructions
I think they are the boss.
The Uk doesn’t really do anything anymore. Just a countrywide museum.
Qual é o nome do aparelho que você está utilizando na ponta.......gostaria de fazer igual....
Poderia me ajudar!
I still maintain that there is need for protective clothing for the workmen.
Clearly the jobs are out sourced
шины ручной сборки дорого наверно😂 пирелли отдыхает
в россии такие мастера очень нужны
Я ОДИН ИЗ НИХ ТОЛЬКО ШИНЫ 51 РАДИУС) КГШ
A for effort. But low standards get accidents
17:02 I could be wrong but that pumps doesn't sound at all like it should.
Please make documentary type of video ,so people not only watch but understand the resole or rereading process.
Unless and until u speak at each stage ,how the message of good rereading to reach the viewers.
Secondly u ade just silent on ingredients which again a crucial part of whole video.
I think speaking with actual process wd make yr video more interesting and successful
Is that queens parade
Mantap
The man should wear mask, safety gogols.
Very primitive and dangerous. U.S. workers do not realize how fortunate they are.
who is making these outer casing with all the tread??
Heat an speed is big cause of blowouts when it comes to recaps!!
that’s what you call a recap
Японское немецкое качество сто процентное соблюдение технологии
It's amazing what can be achieved by hard work and exploitation. Great work men, pity you're probably not being paid a tenth of what you're worth. No wonder an amount of the Indian people end up in scam call centres.😥😥😥
The video is from pakistan.btw banks and crypto get hacked for billions.
they are not indian they are Pakistani
Who cares they look the same
Скоро в России так же научимся при нынешних ценах
Егор, не знаю где вы живёте. Но если в России, то вы явно не в теме.
Наварка резины идёт ещё с 70-х гг. прошлого века. Легковые и грузовые шины.
Вот по-любому у него к врачу с ноздрей торчит кусок покрышки 🤣работает без маски 🤦♂️.
И я бы лучше на ступице делал , так бы точнее посадить протектор.
14:30
They just gonna blend the inner tube in with the tire all bad 😂 eh just save up for a new tire
At that pace you might get two done in a week!
That one tyre costs 65000 rupees or you can say 300 US dollars
Привет! Молодцы!На сколько дешевле новой покрышки?
А сколько будет служить?
@@mihail840 У них спроси
@@dimapool7674 it's work amazing same as new tyres but these tyers are 50% cheaper than new that's why Pakistani drivers using these tyers and one more thing no body is fool every one knows what is good and what is bad for them
@@dimapool7674 🤣🤣🤣👌
Не защиты нихрена, тяжело копейка зарабатывается
И ЭТО РАБОТА ЛЕГЧЕ ЧЕМ ДРУГИЕ РАБОТЫ ,ВРОДЕ ОНИ ОФИСЕ РАБОТАЮТ ,ДЛЯ НИХ БЕЛАЯ РАБОТА
Не дай бог до такого дожить
Why the last grindig step?
Ничего нового. Мне 12 лет было и я в 1994 году устроился в шиномонтажки работать. Покрышки у нас тоже наваривали тогда. Я,правда,в легковой шинке работал
At the end he drop it to the garbage😂
Интересно труд этот окупается
Конечно тако резина от 50000 до 80000р стоит даже дороже
vulkanisir abal2.
gak di cuci gak di oven.
jangan harap awet.
Kha se ho bhai log
Тяжелый труд (((
All airlines retread the tyres on their aircraft. They do not send them to this shop for a reason.
There’s nothing wrong with the way they done it , they done it the manual way as they don’t have the machinery to do it the expensive way but that tyre will have no issues
@@ImranAli-rp4kd There is a reason airlines don't do it this way. Guess what it is?
@@andrewallen9993 unless you want to poke tall buildings with tanks full of fuel.
I think for tractor is OK bcs speed is very low
Pretty cool. There always seems to be an old guy doing nothing, sitting on a chair. Weird.
Same thing down at the chevron gas station old man sitting in a chair while the woman checked you out here in Louisiana
Респиратор где?