How To Change The Brakes On A 2016 Kia Soul
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- In this video we show how to change the brakes on a 2014 Kia soul.
this is our first non Honda video on the channel.
Hope You All Enjoy!!!
Tools Needed
1. 21mm socket & breaker bar
2. #3 Phillips head screwdriver
3. 14 & 17mm socket and ratchet, or wrench
4. Flat head screwdriver
5. c-clamp
Parts Used
Amazon: www.amazon.com...
We are not sponsored or endorsed by any of the products in this video.
Ha! Never thought of using an old pad across the cylinder so my c-clamp didnt have to go all the way down into the cylinder. Thanks for the idea!
Great video. I was amazed at how easy it was to remove and replace parts on my KIA brakes. I love the fact that the caliper comes off without the pads so a groove in the rotor won't hold it in place. I had a bit of trouble with the rotors but a good hammer helped break them loose. The only problem I have with your video is that you break the #1 rule when working on a car. NEVER GET UNDER A CAR THAT'S SUPPORTED BY A JACK, especially a hydraulic pump jack. You are putting your life in the hands of a few small pieces or rubber. Yeah, maybe you weren't "under" the car but if it fell you might be replacing knees or at least the suspension parts. Other than that it's an excellent video and made me sure that I didn't miss anything.
great video. I feel confident that I can do mine now.
What about cleaning and Lubricating
Good ol Amazon brake kit😂
Thanks for the video. Wanted to check and see if anything was different on this vehicle. Looks pretty routine.
It is!
Great. You forgot to mention that we need a completely different tool is compress back the brake caliper, the c clamp is useless in the rear brakes
I saw another video, the mechanic use a nidelnose player and turned it to right to go back
thank you!
Thanks for sharing this!
What size C clamp will work?
What if one of the nails that connects with the rotors are already badly scraped? Meaning I cannot twist the screwdriver because the nail is worn out
Manual impact tool that you strike with a hammer.
Never use a wrench to do a sockets job.
Not torqued at all coming off....yowza !!
Why do you need to manually push back the caliper?
So that the new pads will fit in. The Caliper will be in the position where you last stopped, and you need to make room for the newer thicker brake pads to fit.
@@RepentanceAnabaptist thanks 🙏