Acura TL Broken Ball Joint
ฝัง
- เผยแพร่เมื่อ 17 ธ.ค. 2022
- This 2005 Acura TL broke a lower ball joint and mangled itself. Let's put it back together.
Send us a postcard:
Watch Wes Work
P.O. Box 106
Fulton, IL 61252
Send us an email:
mail@watchweswork.com - ยานยนต์และพาหนะ
![ช่วยพาฉันผ่านเวลา - วสันต์17 [Official MV]](http://i.ytimg.com/vi/HFnntWoqc54/mqdefault.jpg)
After wrenching 30+ years I wish I had a dollar every time those words escaped my mouth. " I wish the guy who designed this was standing in front of me". Don't miss it for sure. You do good work Wes.
Watching Wes struggle in a shop with a lift makes me feel better about my struggles on the floor in my garage. It's not always easy even for a pro.
he has the right personality to do it. is ok if you cuss at it, but have to have patience and persistence.
Hahaha agreed! I would love to have a lift but where’s the fun in that? I love the feeling of a vehicle might fall on me bc of crappy jack stands(says sarcastically)
@@bdavis12758 After having a lift it is soul sucking doing work on the ground ( retired spanner spinner.)
Garage?.... Your really living it up. I have gravel and 35 degrees.... LOL
@@detornodoes upstate New York and center Kansas, I know your pain!
Glad that Im not the only one who has struggled popping out axle shafts. The ones that grind my gears are the ones that resist great feats of leverage, then suddenly release with seemingly little effort.
i've encountered this bs twice from different manufacturers. ergh!
I bought the slide hammer attachment. Doesn't fit in all areas but helps a ton when it fits.
On that one, leave the old inner cup and use the new cv shaft with new inner parts. 😉
What I've had to do which seem to work was getting a big pry bar and using it as kind of a punch at the back, hitting the striking end to push it out
@@melvingibson4525 I think a slide hammer if you can get it on well is op, i've used a pair of prybars typically, but sometimes what they leaver against is too delicate
I've been there. Broke a puller trying to take one out, and then when hand tightening the new one, the thing popped out like it wasn't even held in.
Ive always said that if engineers and mechanics ever met, there would be mass murder !!!! Keep up the good fight Wes. Merry Christmas to you and family.
Worked at Chevy dealers for years, GM would send out advisors now and again, once when totally at wits end working, on paticularly misengineered GM crap, I voiced my displeasure to the rep, this was his reply" the designers design the car, then it's sent to engineering, making it mechanically feasible, then it's sent to money people, they in turn remove features making the car repairable as to costly", so this is why cars are hard to work on, not due to engineering, but bottom line.
Gardening of the galaxy. Love and miss
@@4knanapapa Наивно думать, что компании вроде GM будут думать о вашем благосостоянии, даже если планета превратится в свалку трехлетних выкинутых автомобилей. GM в первую очередь думает о своём благосостоянии, деньги их бог.
@@bearrus2416 That applies to more than just GM. Every company works that way. It's one of the disadvantages of Capitalism, Particularly late stage Capitalism.
@@bearrus2416 Translated: It's naive to think that companies like GM will care about your well-being even if the planet turns into a dumping ground for three-year-old discarded cars. GM first of all thinks about their well-being, money is their god.
Living in the rust belt in the northeast I appreciate your showing us all the hassle of trying to do what is usually a straightforward job turning into a mess. Nothing is ever easy with rust ! Great vid.
The amount of rust alone would make me run south unless the money is so good up there you can buy something new every few years. I got a 74 I’ve had since 85 and it’s got very VERY little rust and it mostly surface. There is no holes.
@@Robrt32 Apparently, the money is so good that those up there CAN afford a new car every few years. I can't even imagine spending that type of money every three years or so. My last cars were 96, 03, 10, and 18. At 2 percent or less on the loans, it was an ok deal on each one. They were all GM, since I got the family price, so no haggling (even if it wasn't the BEST possible deal). And, I got a really good trade-in price on each one. I didn't even need to try to sell them on the open market. Although I'm sure I could have come out a few thousand ahead, I didn't have to deal with the tire-kickers and other idiots.
This one was literally not rusty at all; that's why it's so weird and doesn't really make sense. ???
@@calholli Agreed. He commented that it wasn't very rusty. The owner WAS warned it was on the way out (or at least one on that side), so.. what was the "Rest of the Story"?
@@silasmarner7586 He changed that side too.
"If I could find the guy who designed this thing I would punch him right in the face" Is a phrase that has been uttered in my shop more times than I can count.
I swear Hondas get abused and neglected more than most cars because they take it without failing until something goes REALLY bad. Nice work Wes
Even when they fail it's usually not too bad. My gf had this happen to her Acura (similar model). It happened on asphalt close to home, so she drove it about 1km back to the drive. Some how the only damage was the ball joint and the CV axle which came apart.
@@mzb8134 How does that even happen? The car must have been making noises FOREVER before it happened.
@@mph5896 if the balljoint is loaded by the spring you might not get any noises if it fails fast enough.
@@rkan2 Ball joints don't just fail randomly, under normal use at least. The kid in this video we told he needed this done a year ago. He chose to abuse the car and now it's costing him twice as much or more.
@@jamesofallthings3684 Absolutely, but like Wes explained when comparing yo the F150 - some can fail more catastrophically than others. Some setups have the balljoint loaded by the spring like this Acura. Others have the weight of the vehicle/strut on the balljoint.
this is a perfect example of why it's cheaper and easier to repair things when they go bad, rather than waiting until they completely fail.
I always love it when you recommend safety repairs that get denied. Later the car comes back with aftermarket wheels, and other “performance” bits and still need the same safety stuff.
"Come on" has to be the most used phrase in the world. It's been a very hard year bud. Watching your channel makes me feel like I am not alone.
I'm an old mechanic and sometimes get the urge to pick up an older car just as a project and to have something interesting to do! Then I watch your excellent videos and think again!! That was a really nasty job, Wes! Well done and Merry Christmas!
Wes, you seriously made my day. I fought that same CV axle on that same model car with equally frustrating results.
I’m not a professional mechanic, but I do a ton of repairs. I started thinking something was wrong with me. For something so simple it sure put up a fight.
👆>
One of my sons owns a 2010 TL-note to self created concerning these maintenance items. Wes, have you considered performing on open mic night at a local comedy club? I think you are hilarious and could probably create a lively routine from the eyes of the master mechanic via your life’s happenings 🤣😂🤣👏🏻👏🏻❤️🔧
I'm actually surprised the slide hammer with the vice grips didn't do it, that's always been my go to move if the joint was already apart. The strut fork being too small to fit the inner joint through however, has been a constant point of rage for me since my first honda like 20 years ago. I like the way the suspension system handles, but damn are they stupid to fix sometimes.
One of my favorite newer tools is the vice grip slide hammer combo. I too was surprised it didn’t get it done.
I didn't realize what the vice grip adapter in my slide hammer set was way back in the day when I first got it. It was life changing here in the rust belt once I figured it out
I thought he was on the right track when he grabbed two pry bars, I was surprised when that didn't do it. I like the vicegrip slide hammer too.
A friend of about 30 years who is pretty handy with tools bought an Acura. I am no longer able to work on his car. Physically. That Turkey got on line, borrowed some tools from me, and fixed it with only 10% of his heart working. He didn't know it at the time. He is one blessed rascal. I'm glad he's my friend.
Nice job Wes! Those power steering pumps have a suction side o-ring at the pump that fails and will cause cavitation of the fluid because the pump is higher than the reservoir and make that noise too. Thanks!
just replaced one today, super common
My only comment is that you’re still the most tenacious mechanic I’ve ever seen. Excellent work.
Thanks for these times when you show us poor engineering, at least from a mechanic's perspective. 👍🏼 Makes buying decisions that much easier on used rigs. Thanks Wes.
The struggle is real! Nice job Wes & Merry Christmas to you & the Family!
I like the comment about putting the old oil filter back on, but seeing the the lack of scheduled maintenance that oil filter is in great company.
Well that was painful. Glad to see you overcome something that should not have been that difficult. Also glad that the customer said to go ahead and change the ball joint on the other side.
My Favorite Gen TL, recently did my daily's Ball joints, axles and lower control arms. 200k on original ball joins, zero play, no tears in the boots from a North Jersey car. Kind of a pain with rust, but very straightforward job. Ive always been lucky with axles, most people seem to struggle with em.
I remember my dad bought a Ford Taurus DIESEL! Kind of a unicorn....but it needed a timing belt. We bought a Chilton manual and read the instructions....I kid you not....the very first line was "first remove engine "....That is what came to mind watching this 😂
I had a similar struggle with a c/v axle,....... I used a large pickle fork and it worked for me. I had spent 3 1/2 hours struggleing with it and my son actually pulled it out of my toolbox and had asked me if I tried it. I told him that if it worked I would get him some icecream,.......... needless to say we were ALL happy in the end,..... I got the job done and he got his icecream.
I feel your pain on this one Wes. I did a 2001 Accord with a failed ball joint, same side, same damage and same battle with the CV joint stuck to the half shaft. I have never before or since had such a struggle getting one of those to release. I finally got it with a slide hammer, but not without much cursing and fighting. You’re right, what a dumb design to put the full load of the vehicle in tension on the ball joint and make you separate the wish bone to replace the axle shaft. Ugh. I also replaced the brake hose, as I didn’t know how far it got stretched. Glad you won that fight!
Your ability to work on almost anything is extremely impressive Happy Holidays to you and family and every who reads this.
You gave the best example why Acura is so expensive to repair. Just like Volvo.
Hey, I've been there and done that to many people, my brother is worse, Bought a 98 dodge dakota I told him the u-joint needs changed vary soon, he got about 6 months almost 10,000 miles later it let go and punctured his fuel tank and beat whatever it could under there, Scrapped it and bought a lowered 2003 Mustang GT, this thing was so low it really didn't have any suspension, thought it was the coolest thing in the world, He paid too much for it, and it was put together by some people who didn't know a thing about mechanical work.
He showed me the car and wanted me to put it on my lift and check it out I noticed it making a bottom end vary faint knock to it, it got worse the more throttle you gave it, I told him, bottom end needs to be looked at, probably still salvageable at that point, A few burn outs later, it threw a rod at the starter, it took the starter, pretty good one, he kept that crappy little Mustang for a few years and wanted to put a v8 in it, never did.
I hate when people don't take advice and continue to learn the hard way.
skill versus patience, i admire your grasp of both. Thanks for taking the time to produce your you tube content . You and the family have a happy Christmas.
Your right Wes, I don't think an engineer ever tried to fix some of there designs. Great repair man.
Depends on the company. Some send their engineers out on the production floor or repair areas as part of training, others do not. Regardless, in my history as an engineer (non-automotive), an issue is brought by said engineer to manager or design team and a compromise or decision made based on cost, likelihood of needing replaced and many other factors. I have had to design things in a manner I wasn't the most pleased with out of necessity or higher authority direction in spite of giving reasons not to go that way. Not saying some engineers don't think of repair needs or don't have mechanical experience or may not have seen where the engine was going to be shoehorned into the bay.
@@brianworley7705 Dam bean counters.
Some of those 'engineering miracles' use some wicked tricky assembly procedures. Engineers are twisty little units, best kept in cages.
Good stuff Wes, love your videos. Can't wait for the next one.
Hi Wes, can I just say a big thank you for all the great content you have provided this year, it’s been great to watch. All the best to you and your family over the Christmas season and into the new year.
WES, the guy that can sigh in 40 languages.
Merry Christmas and a happy New Year to you and yours.
Good to see another Wes on TH-cam
Good to see you Fella, I Wish You, The Mrs., Your Little Boy & the Pup a Merry Christmas & a Happy New Year.
Really Appreciate your Videos. I like that you show your good days and not so good days. I find that things don’t always go as planned, no matter what trade your in. I work in Commercial Industrial HVACR Service. I grew up on a farm and went to school as a Diesel Mechanic. Your Channel covers a bunch of bases for me. Thanks, Wes. You and your family have a Merry Christmas and a Happy New Year. I’m not a happy holidays guy.
Patience of a saint. Merry Christmas and a simpler New year.
Neil Koch says "Hey" and thanks for the camera for his channel. Great job. Thanks for sharing.
You did well for the safety that is left on this car 👍
If you’re curious as to the performance gain from that style over the McPherson strut style, it has to do with camber change during body roll (cornering) the dual control arm style keeps the tire flatter to the road. I really enjoy the content, keep it up!
Neil Koch: Dig-Drive-DIY said thanks for the camera and shop towels. I like your channel and the work you do. Keep up the great work. 😁
Great job.
From frustration to success
Have a wonderful Christmas
Wes thanks for another great video and showing us that Murphy will rear his ugly head to all, no one is immune from his reach. On a separate note I believe that the colder weather plays a hand in how smooth a job goes, for some reason warmer temps always make a job go smoother. Merry Christmas to you and your family and hope all goes smoothly next year!
As asked: great job putting the filter back on! 😂 I would have done the same thing. Your costs on this repair far exceed the value of the vehicle 😅
Or you could, you know, charge the customer for a new one
I admire your restraint! Good work!
Excellent work as always!!
Back in college, a friend of mine had this happen to him with his mid 90's Accord. Happened while he was going through an intersection. So while it was inconvenient for a lot of people, no one was injured, fortunately.
Very disappointed that when using the Astro pneumatic 498 you never once said BIG NASTY, I thought you knew better.
Great video as always, happy holidays
Great job Wess, you have a merry Christmas.
I appreciate that when challenged you don't give up.
I commend you on keeping this episode rate PG-13 !!!!
I would have failed miserably!
Merry Christmas & Happy New Year!
Come for the content, stay for the snark. Great job Wes.
It's a great Sunday watching Wes work. I appreciate your endeavors Wes, keep kicking butt.
Man you have patience off a saint, you get my vote.
I find it really helps to rotate the cv axle while tapping it with the hammer. Gets that ring in its happy place and it comes out . I went to war with a few of them before I figured that out . Might just be b.s but I find it works for me. Or gently put a wedge between the housing axle stub helps to but obviously you can’t go full caveman on it because the housing it usually cast aluminum or some pile of garbage cast .
My brother was a Honda/Acura tech. He made a fortune on ball joints,timing belts and water pump. I watched him do ball joints and you are right they hustle.
Nobody's getting rich off .6 for a ball joint😉
Love the classical music at the beginning @Watch Wes Work
Loved the mood setting music for the intro.
The license plate was so close
Should have said WKRP in Cincinnati...
Only the old among us would get that joke, without googling it.
Fond Memories
Why do you keep looking back at the vehicle? Are you checking to see that it’s still there
Likely just hoping it’s all a Bad Dream
Happy (all of them) Holidays. From my couch, watching, I wouldn't change a thing.
Coming soon to Craigslist: 2005 Acura TL. Excellent condition. Low mileage. Fastidiously maintained. Gently driven by Grandma to church on Sundays....
On a job that goes super long like this, do you charge hourly or book time? I really appreciate the videos Wes, Merry Christmas to your family and I hope you guys get some good rest!
A frustrating job but you prevailed! Happy Holidays to you and the family.
Wes, I really felt for you on this job. It had to be gratifying to get it done!
Please accept our Best Wishes to you and your family for a Healthy, Merry Christmas and a Happy New Year!
Merry Christmas to you and your family. Great job as always.
Good stuff Wes. You are one of the legion of unsung heros that keep our sorry world turnin.
Felt your pain on this one.
Merry Christmas to you and your family.
Another good video Wes, Thanks for posting.
Some days are like that in every field of endeavor. Nice job Wes and Merry Christmas.
Wow. What a PITA. Glad it finally went your way. Merry Christmas to you and your family
I feel your pain, great video, thanks for sharing the struggle.
Merry Christmas to you and your family from Texas. Have a safe and wonderful holiday season!
Yanno there’s just something very satisfying about watching an awesome mechanic work his magic
Always great content
Thanks for the time and effort in sharing your front seat on the struggle bus.
Don't you love it when a seemingly "normal" component of a job, rears it's ugly head and takes over completely? That inner CV joint cup defied all logic and ability, yet, Wes overcame and persevered! Job well done.
Wes is the only content creator I'll go back and re-watch old vids. 😊
Glad to see make make a cameo appearance! Merry Christmas to all!
Man, what a hard job! Just love the engineering of the newer vehicles. 🤣😂. You did great
Merry Christmas Wes you are a very patient man indeed!!!!
You the man!! Enjoyed watching, Merry Christmas to you and yours.
Small job, big fight! Sometimes when i am fighting an impossible possible job, i think it's just me and feel embarrassed. Good to see it isn't just me. Keep up the great work Wes. Merry Christmas to you and yours!
Merry Christmas to you and the fam!
Thanks Wes, stay safe.
I just wanna wish you and the family a Merry Christmas, and also for the young man that has the car, and hope some lessons where learned along the way.
Wes you are a hero and a joy to watch keep it up you make the rest of us understand why most engineers need to work on the crappie way they design things.
It always is a pleasure to watch Wes do an excellent job on a poorly engineered piece of kar-kit. Nice work.
MERRY CHRISTMAS to You and Mrs.Wes, little Man and Max 🎄⛄
AS always great work!
Wes love your humour keep up the good work sending your Merry Christmas and a Happy New Year from the 🇬🇧
Thanks for hooking up Neil, seams like salt of the earth like you!
Watching Wes struggle on this job like I struggle on every job I ever do is extremely cathartic. Thanks for sharing your suffering!
Excellent job! Sorry it was such a pain. P.S. Thanks for helping Neil with the camera problem he had. Thank for the videos.
Thanks Wes, once again you have proven to me thet retirement was a wise desission. Every once in a while I do miss mechanicing, but these videos show differnt
Love your sense of humor during your everyday struggles with rust, poor design, etc. Best wishes to you and family and keep up the good work.
great work again Wes, Merry Christmas to you and the family. Take care.
Merry Christmas and a Happy,Healthy New Year Wes, to you and yours! God Bless!
Merry Christmas Wes and family 🎄🎄🎄