Surprising Design in an Antique Fire Extinguisher. Testing and Restoration.
ฝัง
- เผยแพร่เมื่อ 10 มี.ค. 2022
- First we need to fix it. I look it over and figure out how it was made originally, and then fix a hole on the inner container. We discuss how it works, charge it up and test it out. Then finally give it a full restoration to make it an awesome wall hanger, including making a custom wall hanger! ;-)
Kevin's channels:
/ commonwealthpicker
/ commonwealthflipper
My previous collaboration with Kevin, restoring the model A wheel:
• Ford Model A Antique W...
MERCH STORE!:
www.farmcraft101.com
Patreon:
/ farmcraft101
My Amazon Affiliate Storefront:
www.amazon.com/shop/farmcraft101
Buy me a coffee:
www.buymeacoffee.com/farmcraf...
Etsy Store:
www.etsy.com/shop/MadeByFarmC...
Facebook:
/ farmcraft101 - แนวปฏิบัติและการใช้ชีวิต
![ความรักของยักษ์เขียว (ทศกัณฐ์) - เดี่ยว ไออุ่น [OFFICIAL MUSICVIDEO 4K]](http://i.ytimg.com/vi/yCCy-QVHqK8/mqdefault.jpg)
Have a great weekend everybody! I've been working on new additions to my Amazon store: www.amazon.com/shop/farmcraft101. And don't forget to check out Kevin's channel if you are interested: th-cam.com/users/commonwealthpicker.
Hydrochloric acid works good for cleaning copper.
Don't use steel wool on copper use copper wool.
The steel wool will imbed steel particle in the copper and cause corrosion.
I hope this helps.
"There is no reason it's not going to generate pressure"
Google says that solution of baking soda and water freezes at around -10C so the solution inside can freeze solid.
It's even written right on the label "PROTECT FROM FREEZING", I assume it would work very poorly or not at all in such conditions.
Still a very interesting and educational video!
I just came here from your community post saying that the video didn't do so well. I didn't even know you had a new video out until I saw the post. I enjoy all your videos, no matter the subject.
IMHO what threw off the stats on this video was the timing. For the past 2 weeks I've only watched news on the Ukraine crisis, and skimped out on my regular channels. If a large percentage of your regulars did what I did, then it could have impacted your stats.
Now I'm going to watch this video. The title is interesting and I know I'll enjoy it. Thank you for you videos.
Do they make copper wool? I think you are referring to bronze wool.
I'm a volunteer firefighter in my hometown and on both our Engine, and our ladder truck we have a 2½ gallon water extinguisher that's powered by compressed air and filled using a normal air chuck for filling tires. We fill it with water and a little dish soap to give it a slight "foam" effect. The primary reason for it is that it helps to break the surface tension of the water and allows it to penetrate/absorb into the fuels more readily and easily.
John, as a long time sailor I’ve had a lot of experience with brasso and polishing. Your beautiful fire extinguisher will quickly collect fingerprints like ants to sugar. To make that shine last I’d suggest spraying it with lacquer.
One other thing... If you were ever planning to really use it. The glass acid bottle is supposed to have a lead stopper in it that falls out when turned upside down. It's just enough to seal in the acid against being splashed out into the soda water accidently.
For the letters you can use a large flat piece of wood or metal, stick some fine sandpaper to it and use that to take off only the high spots of paint (that is covering the letters).
A basic sanding block would work perfectly. Even a ruler wrapped in sandpaper.
I think the inner container was slide up from the bottom and then the cap at the bottom was pushed in and then they rolled that seem at the bottom area to crimp it all together 😀 the reason it's so obvious is that the hose is threaded into the inner vesal, that means the inner vessel was built and drilled, tapped before installing into the copper outer skin.
I'm a babyboomer, those were pretty common when I was growing up. I had no idea how they worked until your demo. Nice restoration.
but doesn;t that mean 1982 you know this extinguisher is from 1970 or earlier and is dangerous to use? thats why its been banned ? did you know this type is assoicated with explosions is the main reason it was banned in favor of a newer model???
man your restorations always come out amazing, at least you take your time and do it the right way unlike 99% of restoration channels. keep up the amazing work and hope to see more cool project's like this in the future!!
That fire bottle really looks good, John
I do actually remember these, also another type where you had to invert and strike a plunger on the ground this drove a pin through a glass vial of acid. As a kid I found some of these vials and carried them home in my pockets! No ill effects!!
Great job on the restoration. Came out great.
Just a little warning. Whenever you attempt to charge and use one of these as either a demonstration or just playing around, keep exposed skin away from the nozzle when you invert it. The first few ounces of liquid that come out are more often than not, mostly straight (or nearly straight) acid.
Just happened to visit your site since joining awhile back and found you working with the fire extinguisher. I happen to have one that came from my two-room grade school in Grape Creek, Illinois. My father was on the three-man school board at that time, in the late 1940s, and I was helping him to get the school ready for the fall session. Those old extinguishers were being replace with newer models and dad gave me one but I had to discharge it. So I did, outside.
I still have the unit and it is far better shape than the one you were given. so I've not done any work on it. One of my heirs will inherit it soon, I'm 84.
I vicariously restored my fire extinguisher by watching this video 😄.
Seeing all the work "we" put in, I dont have the urge to restore "another" ...WE did a great job! 👍
Many years ago my grandfather had 8 of these extinguishers hanging in his used machinery warehouse where I worked a high school job. The place was large and customers could browse without too much oversite. I caught site of a customer just closing his trunk on two of these copper antiques. I said hi and asked what he put in his trunk. He hemmed and hawed a bit just as all heck broke loose and fluid started streaming from the back of his car. He had no idea how these worked. Sheepishly opening the trunk he viewed the mess and turned over the pilfered extinguishers.
Haha! I hate a thief. Hope the acid did a number on his car.
Fantastic job! Yesterday my wife came to me with a solid copper mixing bowl, after trying the paste solution and asked it I could improve on it. I put a wire cup brush on my cordless side grinder and followed up with Scotch Brite, and got it back to looking like new.
A fire extinguisher with built-in instructions on how to recharge it is pretty refreshing to see.
It’s amazing how resilient you are! Wow
That thing is BEAUTIFUL! 😍
Keep making videos like this, please!
another underrated video
Fantastic video! I really enjoyed it! Once again reaffirming that FarmCraft101 is my favourite channel on TH-cam. I love the variety of subject matter that we get to experience here. Thanks for making this video! 😎👍 It's so cool how simple and effective this old style of fire extinguisher is.
I grew up in the era of that type of fire extinguisher and I seem to remember that the acid container had a weighted cap that just set on top. It would keep the acid container sealed and would fall free when the extinguisher was turned over for use.
Yep, you are correct. There was a loose fitting lead stopper in the top of the acid bottle. When you turned it upside down the stopper would fall open allowing the acid and the bicarbonate solution to mix and react.
Im so glad you left the dog trying to eat the cow pie - your videos have some good laughs in them
Such a snazzy looking fire extinguisher, plus the chemical reaction powering it is so elegant!
it amazes so many how efficient such simple technology still is, but when you look back at how long these were in use it really makes sense. There is something to be said for the "KISS" method. Keeping it simple but elegant will never go out of style. ♥
Nice restoration! I got ahold of one of those in the first radio station I worked for (they were just in accounting & sales, CO2 in engineering spaces). Insuror required a change to ABC extinguishers, and the folks that sold them to us were nice enough to offer to haul off the old SA extinguishers. I snagged one and turned it into a nice lamp.
Jon,
Having watched pretty much all of your videos, I'll be honest and tell you that I did not think I'd like this one.
I thought it would be lame. I was wrong.
This Antique Fire Extinguisher video may very well be the best one that you've done. Expert craftsmanship, very fine workmanship, excellent explanation of the working parts, etc.
Plus, the fact that you put your better half in the video and gave her the credit that she obviously deserves for keeping your stunningly gorgeous farm running smoothly whilst your goofing off with your "work" made me smile.
You're a good man. You remind me of my father. Keep up the good work!
Warm regards,
Al
p.s. this is the first comment I've made on your videos. You've made an impression on me with this one.
This turned out beautiful
When painting raised letters like that, apply a thin coat of Vaseline to whatever you don't want painted. Then paint. When paint dries, just wipe with a cloth. The Vaseline will come right off and that part will not have paint on it.
Johnson, squirting extinguisher, getting the paint off.
But the jealous dog segment was even more hilarious. Scratch me! Ooh poop! lol
As always GREAT!
The Part with the red color is great!Good job👍Greetings from Germany
Those seals crack me up so much I have to stop the video to finish laughing before I can continue watching. Surprisingly funny faces on those seals. 😂
Coffee and tears flying everywhere here at my place.🤣
Stay strong!
I came here to view the content once I knew it was FarmCraft101. I would have eventually realized it was your channel. However, without your prompting I didn’t realize by the thumbnail alone. I quite enjoy all of your diverse content and this was no exception. Thank you for putting out such interesting stuff. I have learned an awful lot about a variety of things from you.
Fantastic results. Lovely piece of functional art. Really enjoy all of your videos.
I think I missed this upload because of the thumbnail. Didn’t realize it was one of yours in my feed. Comparing to the Antique Ford Wheel restoration from a couple months ago I think that thumbnail is a winner because 1) it’s immediately clear what you’re restoring, 2) it teases the end result, and 3) your logo ‘pops’ really clearly over the red paint!
Just my 2 cents - hope it’s helpful. I found your channel during your cannon casting saga and have been really enjoying your content since! Keep ‘em comin and I’ll keep watching!
Anyone aside from me enjoy watching the shop beetle scurry around at 23:18?
had some of these in a lodging home all polished up.,fire department said they had to go not legal anymore.converted them into floor lamps , should have seen the look on fire marshalls face on next inspection, priceless !!! gord
One day I will have watched all of your videos and enjoyed most. Some I have chosen not to watch but I'm learning. I get so tempted to bring you stuff to play with but Louisiana is a ways away and my budget does not allow. I don't send stuff to people. I must hand it to them. A quirk of mine. lol As usual, GREAT VIDEO. THANKS.
A like for each time resources are reused, like the battery acid.
18:48 The classic "dog sniffs at poop and you push it away before it has the idea to roll in it" lol
you can use an air hose from an auto shop to replace the old hose on the extinguisher. Thats how i did mine.
John, I have a similar one sitting under the table saw. It's a "PYRENE" Soda Acid, all brass I've been saving for decades to restore. It even has four paper Pyrene tags attached to the hanger, one reads (in pencil) 'Last charged 6-11-1959'. The other old paper tags could be from the 1940's with original manufactured numbers, model, etc., who knows? Thanks for the reminder, I just pulled it out from under the saw dust...just made a walnut roll-top desk and didn't have time to clean yet.
When painting with a rattle can, Light fog coat first, let tack, then work up to final heavy shine coat.
Have notifications on but nothing was in my tab, didn't know you uploaded
Nice! Turned out awesome. That’s interesting it recommends recharging at least once a year, really cool!
As a teenager I bought one of these extinguishers empty. Reading the instructions on the exterior I bought a container of baking soda and a flask of sulfuric acid. The flask is placed in a holding cage inside the top of the unit. When upsetting the extinguisher after it had sat many years in our hallway the whole bottle of liquid was expelled. I have since watched many hundred thousand dollar farming combines burn to the ground. Every one of these combines needs this extinguisher installed in a hook on the wall with a rip strap holding it in place. When the combine ingests a stone it causes sparks igniting the straw in the eccentrics and when the operator smells smoke he should immediately lift the side door of the combine, and with THIS EXTINGUISHER douse the fire saving his harvest year.
Right on!!!!!!!!!!
Very beautiful restoration, thank you for sharing your amazing story. God bless you and your family.
Interesting to see how it works, Great job in restoring it. For the painting, while it is wet you can use a flat block of wood with a thin cloth like a tee shirt stretched tightly over it and damped with a solvent. It will wipe just the letters clean. Easier and faster than a Dremel after its dried.
Hi from Commonwealth picker! He sent us over to see this. I love old fire extinguishers. Subscribed too.
Amazing video as always! Its crazy how ingenious the design is. Simple and effective
Probably the most known example of this style fire extinguisher was used by Doc Brown in Back to the Future to put out his wastebin fire of oily rags after the “crude model” demonstration.
I happen to have the exact same one you just restored.
You bought the restored unit?
Amazing! Supercool to see /Henrik
Nice and careful restoration. Great job!
Very nice!!! I’m always impressed with your work!
Nice Job!
Looks like Kevin the "Picker"picked you a duff extinguisher! Thanks Kevin!
Dude, you’re determination is amazing and admirable. Even awesome I’d say!
Awesome Video!
LoL ... love your videos especially your sense of humour
Growing up, I remember my parents having one of those in the house. I think it was decoration. I wish they still had it as I love that old kind of extinguisher.
Awesome job
When I worked rebuilding industrial electric motors I just brushed some muratic acid on old green copper in order to cleanly braze on fresh lead wire. Worked quick and made it shine like new with a quick wipe from an abrasive pad afterwards.
Gorgeously satisfying! Or to put it another way; good job!
😊
Awesome job!!! ❤️❤️❤️👍🏻👍🏻👍🏻
I saw your ask, so I watched and enjoyed the video-as I have many videos showing how old things work. Considering why people watch your videos to make title and image may help with consistent views? I like learning how old things work-and you do a great job at figuring it out and sharing that adventure. A title like “spraying this 1940’s extinguisher” and image of it spraying-or before/after mirror might draw me in?
I like to know how/why old things work-and see inside mechanical things gadgets as simple things are best. The title inferred that exactly, but I didn’t think I’d be interested until I realized it was your video and started watching! I hope this feedback was helpful-but I can’t see how it can be lol! -I enjoy your work-thank you.
My grandmother had at least 100 of these in the attic. Friend worked as a janitor for school district and when they switched to modern fire extinguishers they were being thrown out as trash. I've got one now residing on my fire place mantle for decor.
I saw you take a sip at 12:06!
I'd have agreed that the fire was not technically completely extinguished. I wouldnot have expected it to completely burn down after this though. Intresting!
The salt is the abrasive and the vinegar is the cleaner. The flour congeals the solution and makes it less runny and more sticky. You could also coat it with ketchup and it would do the same thing just would have to leave it overnight. :)
Great video! I learned so much, thanks!
Good show
When we were kids, we used to use salt and lemons to clean and polish the copper bottoms of moms pots and pans. It could have worked pretty well on this too.
Good stuff not sure how this video only has 10,000 views….
People take for granted fundamental engineering like production tolerances pressure vessels and seals. However back when these were built none of those standards existed. It was extremely difficult to create a pressure vessel which would hold pressure for long periods of time.
We all stand on the shoulders of giants.
I have one that's been in my family ever since I can remember and much longer I'm sure. I'm gonna restore it too. It's in great shape already still has the bottle and lead stopper in it
Really enjoyed this one. We need to set up a go fund me to get you a better flashlight.
Haha! Turns out I just got an Olight work light! ;-)
Loved the video! Keep it up!
That looked gorgeous when you were done. I was skeptical the entire time for some reason lol.
I love it. BRAVO. I am fascinated with creative and innovative builders, crafters, repairers, etc. I am referring you to two other TH-cam channels I have, or do, follow. One is a restorer of old tools (great sense of humor): Hand Tool Rescue. The other is a creative (kinda kooky) inventory/builder of pretty useless things: Colin Furze. He has a very cool workshop you would probably enjoy seeing. Plus, he built a fantastical tunnel under his yard!
I've watched both and agree with your assessment! Colin in particular does some damn impressive stuff!
Great video! I had absolutely no idea this is how fire extinguishers used to work. I was surprised how well it actually worked and how long it ran for.
Talk about pissing a fire out!!
As always, great video.
Excellent job. I tidied up one which someone had partly sanded with a coarse grit previously. It took me so many hours to get it half as good as yours. Anyway with a slit in the top it makes a great money box.
Beware the lead liner on the inside. A bunch of loose change in there could come out with lead on it when you make a withdrawal.
Yep, stuff and things.
"For fire, turn bottom up" I'm pretty sure fire is the one thing you don't want when a extinguisher is needed.
Great restoration!
"For" takes up a lot less room than "in case of". And back then, it was a LITTLE bit safer to assume that someone needing an extinguisher would have the sense to understand that it means "(to use this as a cure) for fire, turn bottom up".
Good!
Here for the seals.
Very cool. For a fully functional restoration don't you still need to replace the lead plug on the glass flask? I assume that helps keep the acid from spilling or evaporating.
For future copper cleaning, make what's called 551. It's 500ml water, 50ml hydrogen peroxide and one ounce of citric acid
My grandpa used to paint letters that he welded on his “creations”. He would apply grease to the top and then paint. Afterward he would wipe off the paint from the top.
Not very precise but other applications of a similar idea might work.
Great video. You are one of my top creators. I rank you up there with Astrophysics and machinist videos because of your thought process and your effort to do things right.
Always interesting and rewarding to watch!!!
Keep it up!!!
Go Ukraine.
Damn amazing
Can't see anything wrong with this video. I really enjoued it! Just like all your videoes. :)
just a tip i have spray painted overtop of old letters on bucket trucks drippin with grease and hydraulic fluid and ETHER works really well at degreasing stuff ...spray it whipe it and the air vaporizes kinda like alcohol does spray it again whipe it ...PAINT ALL DAY LONG no beads no runs .. ;)
The U.S. Navy uses a chemical for all "verdigris" on copper & brass. It's called "bug juice". Commonly called red "cool aid"!
Verdigris is the name for the green stuff! Peace brother!✌😎🏴☠️
That 1:1:1 (by volume) salt, vinegar and flour mix seemed to work well for getting the oxides off, I'll need to remember that!
Next time you do a "seal" joke, I think it would be funny to mix in a photo of the singer Seal - (Kiss From a Rose) (Batman movie) as a change up.
That green stuff is called Verdigris
Hi there, welcome back to DickJokes101! We have to get this channel to 250k subs and beyond, you get to learn and laugh at the same time.
10:20 I was expecting the classic explosion joke
woah, that sound at 5:29! straight out of star wars or so...
Nice video! Hope you'll make a new cannon pour sometime soon..