@15:50 to watch HOW TO SET UP WATCH (time, date etc) - @17:20 how to fix MISALIGNED ANALOG HANDS. Anyone have misaligned analog hands? Did the video help?
Hey man, it's the second time I have to replace my watch battery and came back to your video, just wanted to say thank you once again! It only cost me $3.99 to buy the batteries, you have saved me a good amount of money. Thanks!!!
My local jeweler messed this up and had me without my favorite timepiece for 3 weeks, I can batteries ordered online in 3 days.... Great help, thank you!
I was frustrated for a while changing my battery in my gg1000 mudmaster and set up but after I watched your video for a little while for setting it got to me and that your video help me 100% thank you very much it's her I appreciate it
Hey man, It's me again. Just wanted to jump back to THANK YOU again: After replacing the batteries the hands were all messed up, even the mode indicator. I thought my watch was gone for good and then came back to your video to follow the hands alignment procedure and now everything is back to normal. Thank you very, very much. Honestly, I was really scared since not only the hands but that mode indicator too was messed, but now everything it's back to normal. I don't know why people put dislike on the video since it's really complete and thorough, probably because the thing with the microfiber, but, bleh, your video is amazing. So, anyway, thank you for your amazing tutorial, cheers from Mexico!
Very nice video, well thought out, nicely filmed and narrated. My battery change went well, but during disassembly one of my Phillips screws started to strip. I switched from the P0 to a P00 driver and the smaller Phillips easily grabbed the screw that started to strip. I finished assembly with the P00 and the screws fit really well. Thank you for a great video.
Thanks a lot for the video, and taking the time, I just had my batteries replaced and couldn’t figure out why the little arrow wasn’t pointing to the right spot. Good help explaining how to fix.- Now for those who just have something bad to say about the video, how about instead of wasting time on negative crap, why don’t you go ahead and make a video on your own to show us your savviness.
Rony Rosales thanks much! I don't mind the negative comments. I won't be able to please every viewer but it motivates me to improve the videos. Thanks again glad the video helped. Cheers
Thanks for this video my friend! Just changed my batteries on my GG-100TLC and couldn’t get the watch back on time correctly with everything lining up until I found this GREAT vid showing me step by step how to reset everything back to normal. Thanks once again!! 👏👏💯☝️
As a former jeweler, that was a huge 'party foul' setting the dial and hands on a cloth and sliding it (cringe)! Why did you skip the Step shown on the STICKER? It tells you on the sticker what to do. Stick one end of the tweezers in the hole contact (+), the other on the back where it says: (-).
Searching for a quality video where they show the reset after battery change. So far not one did it. This videos should be banned. My heart stopped for a while after he dropped the inside...
Ditto... facing the exposed watch face on a piece of microfiber cloth... you could have accidentally removed the hands.... ahhhhhhhh.... and total disregard of the instructions on the sticker
Hi. In the hole on the left of AC lettering? And second one on the back, where is - ? Could I use small cable instead of tweezers? How long have they to be connected. Thank you for your time.
Dearest sir, you are a scholar and a gentleman. My watch is fully functional again!!!!!!! :D :D :D Thank you so much, may your day be filled with immeasurable blessings and wonder
I just bought the G Shock Mudmaster yesterday and I am seriously well impressed with the functionings the watch provides as well as I see it as well made and a robust watch and great to look at I would definitely recommend the Mudmaster to everyone whom is going to purchase a new watch 😁
Dude, this is creepy, today I received my batteries , I came from work and started replacing the batteries on the same watch you have on hand. When I was setting the date and time I was like WTF !!! Today is May 19 2020. Dude that's crazy when I hear you say May 19. Thanks for the video, thanks to you I was able to fix my G-Shock 👏👏👏👏👍👍👍👍👍👍👍👍
I was so worried when the mode window was misaligned after I got the battery replaced from a repair shop. Even they didnt have an idea on how to fix it. I watched this and managed to get it done perfectly. Thank you so much!
Everything was perfect in terms of steps sequence and safety, except one thing I wished you told us about it which is ,, how tight we should tighten the screws, I messed up my watch holes I don't know what to do. thanks for wonderfull tutorial.
Hi. There is info on sticker: After battery replacement contact AC with (-) using tweezers. Is it necessary? You didn't do that. Could I use small electric cable instead of tweezers? Where is AC and where is (-). Thank you for your time.
yeah this was really good, this will save a $20-30 next time I need to change the batts, I'm a clean freak so all I'll say is ..I prefer not to touch ANYTHING with my fingers oil on our skin is there for a reason & it does important things but not for touching batts, seals,gaskets, glass,crystal ext.. use tweezers for everything even flipping those clips back down, you hold the tweezers together & use as a solid flat head type piece. THANKS A LOT!
Thank you very much for your video, it is very a fruitful support. Just one question : Why you didn't contact AC with minus (-) with your tweezers as indicated on the stickers ?
This is the battery change equivalent of the #VergePCbuild And this is the reason we ALWAYS take our watch to a specialist, in order to change the batteries. WHY did you pull the module out of the watch??? WHY did you put the module face-down on a microfiber cloth?? WHY did you skip cleaning the inside of the case from dust?? WHY did you skip reseting the watch after battery replacement, by shorting (AC) and (-)
Hey, silly question... what happens when you don't reset the watch and is there any indication on the front that it was successfully reset? I obviously got to change the batteries soon lol
@@Wagner669 thank you. I just see do many vids of ppl not resetting it while others do. Its baffling. I'd rather just follow the correct instructions to be safe. Thank you again
@@thecreeper6799 usually the digital part of the watch acts strangely and doesn't show all parts of the digits on the lcd display. Once you reset it, everything works If casio bothers to put a sticker with reset instructions inside the watch, it means it is that important ;)
Hey man, thank you. Here where I live I don't trust the watchmakers to properly put the gasket. I was able to replace the batteries by myself, at least if something catastrophic happens it was my fault. Thanks!
When the time comes, going to have it done professionally by Casio or watchmaker, so it cost me $25 plus battery? Well worth the peace of mind, and if they hose the Mud Master, it's on them.
Really liked the video, it was really well made. I also liked how you went over things multiple times in case we couldn't see or understand how. Keep it up
Dude, why did you have to raise the tabs inside, wouldn’t it be easier to pull the sticker covering the battery while the tabs are still holding the module so the entire module doesn’t come off the watch housing?
What is the grey rubber cover part called? And is it essential? I had my battery replaced today and it immediately fogged up, took it apart and found the o-ring and rubber cover had not been put back!
I just bought a GG 1000 used and when I went to change the battery, it’s missing the two gold springs and the plastic retaining ring that goes around the movement and it’s also missing that grey rubber piece. I’ll pay up for those parts if you’ve got them!!
Thanks for the video. I decided to change the batteries on my own it was harder than I thought lol. I took it completely apart except for the module. Had a heck of a time putting it back in. I eventually got it and I cleaned the inside of my watch too. I figured what the heck i already got my greased paw prints all up inside it. Got it back and running like new. I also used neosporin to lubricate the rubber o ring.
Hi just found your video, really helpful. Do you know what can I do, my dad’s watch doesn’t move the hands except for the seconds hand. Actually everything works on the watch except for the hands.
I am frustrated with trying for the past two days to set the watch! I have followed every tutorial, including Casio website. The time mode arrow is at the 12 o’clock position. Once I have all other dials at 12 o’clock as well, in the H. Set mode, I press the adjust button once and only the hands on the watch change. The arrow in the mode window will not move or “reset” to the “time” window or the 6 o’clock position. The mode arrow will move when pressing the mode button but NEVER stops at the “time window”. Casio customer service cannot help because they are closed due to COVID state
I don't know if you're still having trouble but basically you hold adjust til it beeps a second time to adjust the hands, set the second hand to home position, press mode again to adjust the hour and minute hands, press mode a third time and you will be able to adjust the little mode dial. As a tip the home position for that one is the 12 o clock position. Then press adjust to exit the settings and it should be accurate after that.
I don't get all these negative shit comments and toxic people here. Did exactly as he explained except the module removal (which he explained well why he did it but you whiners didn't listen) and got the batteries changed, tested ALL functions and everything works. A big thanks to Gi-Shock-Go!
@15:50 to watch HOW TO SET UP WATCH (time, date etc) - @17:20 how to fix MISALIGNED ANALOG HANDS. Anyone have misaligned analog hands? Did the video help?
thanks for video very helpfull ;)
Yes, I did and your video helped greatly
Thank you 🙏🏻 very much
Thanks, the manual is not clear on how to align the misaligned analog hands. Your video helped a lot.
i changed my batteries so the hands where out of sync with the digital time so yes sir thank you so helpfull
Thank you! very helpful and very detail!
Hey man, it's the second time I have to replace my watch battery and came back to your video, just wanted to say thank you once again! It only cost me $3.99 to buy the batteries, you have saved me a good amount of money. Thanks!!!
Just came across this video and it saved my wallet. I thought my watches needed repair to sync the hands and digital. You are a life saver. Thanks !!
My local jeweler messed this up and had me without my favorite timepiece for 3 weeks, I can batteries ordered online in 3 days.... Great help, thank you!
I love the dust particles under the glass. They really add to the view :)
I was frustrated for a while changing my battery in my gg1000 mudmaster and set up but after I watched your video for a little while for setting it got to me and that your video help me 100% thank you very much it's her I appreciate it
Rick Rodriguez my pleasure thanks for watching
Best video I’ve found! Shows all the problem points and how to fix them.
your’e changing batteries, there’s no need to lift those tabs up. like you said those hold the module in place. just pry the batteries and change it.
U didn't listen to what he said mate . Watch again to understand
@@jedsim875 thanks for show us the entire job. Great 👍
Easier said than done
This video was very helpful! The hand adjustments had me thinking I broke the watch before finishing watching it to see how to adjust. Thanks man!
Hey man, It's me again. Just wanted to jump back to THANK YOU again: After replacing the batteries the hands were all messed up, even the mode indicator. I thought my watch was gone for good and then came back to your video to follow the hands alignment procedure and now everything is back to normal. Thank you very, very much. Honestly, I was really scared since not only the hands but that mode indicator too was messed, but now everything it's back to normal.
I don't know why people put dislike on the video since it's really complete and thorough, probably because the thing with the microfiber, but, bleh, your video is amazing.
So, anyway, thank you for your amazing tutorial, cheers from Mexico!
Elias De la Torre thanks for taking the time to comment.... Glad the video helped and you were able to fix the hands. Gracias hasta México!
Just going to take mine in, but thanks to you and your video, I'm going to tackle this myself. Thank you. Well done.
Very nice video, well thought out, nicely filmed and narrated. My battery change went well, but during disassembly one of my Phillips screws started to strip. I switched from the P0 to a P00 driver and the smaller Phillips easily grabbed the screw that started to strip. I finished assembly with the P00 and the screws fit really well. Thank you for a great video.
Thanks a lot for the video, and taking the time, I just had my batteries replaced and couldn’t figure out why the little arrow wasn’t pointing to the right spot. Good help explaining how to fix.- Now for those who just have something bad to say about the video, how about instead of wasting time on negative crap, why don’t you go ahead and make a video on your own to show us your savviness.
Rony Rosales thanks much! I don't mind the negative comments. I won't be able to please every viewer but it motivates me to improve the videos. Thanks again glad the video helped. Cheers
Thanks for this video my friend! Just changed my batteries on my GG-100TLC and couldn’t get the watch back on time correctly with everything lining up until I found this GREAT vid showing me step by step how to reset everything back to normal. Thanks once again!! 👏👏💯☝️
As a former jeweler, that was a huge 'party foul' setting the dial and hands on a cloth and sliding it (cringe)! Why did you skip the Step shown on the STICKER? It tells you on the sticker what to do. Stick one end of the tweezers in the hole contact (+), the other on the back where it says: (-).
Hi has no idea what is he doing there. Lmao poor watch :( . He is so uncareful with it :(
Made me afraid very afraid
Searching for a quality video where they show the reset after battery change. So far not one did it. This videos should be banned. My heart stopped for a while after he dropped the inside...
Ditto... facing the exposed watch face on a piece of microfiber cloth... you could have accidentally removed the hands.... ahhhhhhhh.... and total disregard of the instructions on the sticker
Hi. In the hole on the left of AC lettering? And second one on the back, where is - ? Could I use small cable instead of tweezers? How long have they to be connected. Thank you for your time.
best how to video on this watch i have ever seen!!! thank you
So easy, done step by step, awesome man. Done mine today
Dearest sir, you are a scholar and a gentleman. My watch is fully functional again!!!!!!! :D :D :D
Thank you so much, may your day be filled with immeasurable blessings and wonder
I just bought the G Shock Mudmaster yesterday and I am seriously well impressed with the functionings the watch provides as well as I see it as well made and a robust watch and great to look at I would definitely recommend the Mudmaster to everyone whom is going to purchase a new watch 😁
Superb, just changed my shock’s battery watching this video.
Thank you so much.
Dude, this is creepy, today I received my batteries , I came from work and started replacing the batteries on the same watch you have on hand. When I was setting the date and time I was like WTF !!! Today is May 19 2020.
Dude that's crazy when I hear you say May 19.
Thanks for the video, thanks to you I was able to fix my G-Shock 👏👏👏👏👍👍👍👍👍👍👍👍
menjivar76 thanks for taking the time to post... glad the video helped. May 19th... crazy indeed
I was so worried when the mode window was misaligned after I got the battery replaced from a repair shop. Even they didnt have an idea on how to fix it. I watched this and managed to get it done perfectly. Thank you so much!
Dasun C. Premasinghe comments like this are why I do these videos and reviews! Thanks for commenting. Glad it worked
Thank you for the detailed and clear walk through. Just fixed mine!
Great tutorial! Not preamble, no bullshit, straight to the point. Thanks!
Everything was perfect in terms of steps sequence and safety, except one thing I wished you told us about it which is ,, how tight we should tighten the screws, I messed up my watch holes I don't know what to do. thanks for wonderfull tutorial.
Brilliant many thanks, wrong hand time has been doing my head in since battery change
Hi. There is info on sticker: After battery replacement contact AC with (-) using tweezers. Is it necessary? You didn't do that. Could I use small electric cable instead of tweezers? Where is AC and where is (-). Thank you for your time.
invest in a movement holder. Very cheap and easy to use. Laying face down on any cloth is disastrous. Also rubber finger cots are watchmaker friend.
yeah this was really good, this will save a $20-30 next time I need to change the batts, I'm a clean freak so all I'll say is ..I prefer not to touch ANYTHING with my fingers oil on our skin is there for a reason & it does important things but not for touching batts, seals,gaskets, glass,crystal ext.. use tweezers for everything even flipping those clips back down, you hold the tweezers together & use as a solid flat head type piece. THANKS A LOT!
Thank you for the video. I've recently bought one of these watches and it's good to know how to change the batteries when the time comes.
I would never! Never ever ever place any movement face down on anything other then the watch case or movement holder!
there is a big chance that you can bend the arms
Hell's yeah,a 600 dollar dust particle!
Many thanks sir, very well detailed and good tips. Best one !
Thanks dude for the help.. Got my mode hand fixed
You are my saviour.. Thanks a lot, Bro..
Thanks my Friends ...helps a Lot...good video..greetings from Perú...specially fix misaligned analog hands
I love your excitement about G-Shocks, but I wouldn't ever let you near mine to change a battery. 😂
Thank you so much for this video I just changed my batteries on my GG1000 💯 and I’m back up and running
Great video and you are great at explaining things 👏🏻👏🏻👏🏻💯
I love this watch.Built like a tank.I use mine diving and spearfishing and it never leaked.
dude !!!!!THANK-YOU !!!!!!!! got watch all fixed up thanks to you and saved money to Thanks again
I can’t watch you butcher that g shock any more..
Dan Young lol
Guys a nightmare lol
@@GiShockGo you probably damaged the pointers when you took the module out, and the module fell back
@@GiShockGo the towel trick, is just as stupid. For anyone changing the battery, do not take the module out unless necessary
Thank you very much for your video, it is very a fruitful support.
Just one question : Why you didn't contact AC with minus (-) with your tweezers as indicated on the stickers ?
This is the battery change equivalent of the #VergePCbuild
And this is the reason we ALWAYS take our watch to a specialist, in order to change the batteries.
WHY did you pull the module out of the watch???
WHY did you put the module face-down on a microfiber cloth??
WHY did you skip cleaning the inside of the case from dust??
WHY did you skip reseting the watch after battery replacement, by shorting (AC) and (-)
Hey, silly question... what happens when you don't reset the watch and is there any indication on the front that it was successfully reset? I obviously got to change the batteries soon lol
@@thecreeper6799 if you don't reset a casio after a battery swap, it doesn't work correctly
@@Wagner669 thank you. I just see do many vids of ppl not resetting it while others do. Its baffling. I'd rather just follow the correct instructions to be safe. Thank you again
@@thecreeper6799 usually the digital part of the watch acts strangely and doesn't show all parts of the digits on the lcd display. Once you reset it, everything works
If casio bothers to put a sticker with reset instructions inside the watch, it means it is that important ;)
@@Wagner669 Do you think each time we replace battery, do we need to buy a new gasket? Does it wear off?
Hey man, thank you. Here where I live I don't trust the watchmakers to properly put the gasket. I was able to replace the batteries by myself, at least if something catastrophic happens it was my fault.
Thanks!
Elias De la Torre awesome! Glad to hear
Thanks man☺️👍 you saved me a lot! 🤗
Great video. A good watch but I would always go for a Solar/ Waveceptor model.
Happy Me completely agree, but unless you're buying a 5600 you'll be paying more for that functionality.
Thank bro couldn't figure it out this video help me 👍👍👌
what about AC instructions on the battery cover ?
When the time comes, going to have it done professionally by Casio or watchmaker, so it cost me $25 plus battery? Well worth the peace of mind, and if they hose the Mud Master, it's on them.
Really liked the video, it was really well made. I also liked how you went over things multiple times in case we couldn't see or understand how. Keep it up
Thank you very much for the tutorial!! You've saved my $45. Thank you thank you.
Mr66Yellow music to my ears!!! Glad it helped
I just got this watch yesterday, great video, thanks.
Dude, why did you have to raise the tabs inside, wouldn’t it be easier to pull the sticker covering the battery while the tabs are still holding the module so the entire module doesn’t come off the watch housing?
Did it on purpose, he wanted to show what to do should the whole module accidentally comes off.
Thanks for posting this! This REALLY helped!
Thanks a lot, very usefull.Juste at 15:31 are the plastic parts very important? I loose one..
Lenormand it's not a big problem. It'll be ok without that little plastic piece.
@@GiShockGo Ok thank you. That’s what I thought even without, water can’t fit in the watch
I didn't see an AC reset (instructions on the sticker) done. Ever had an issue wit not performing that?
Thanks for this video, wouldn’t of been able to do it without it :)
Great video, especially the watch set up after the battery replacement. You saved me hours of reading from the G-shock manual. Many thanks.
hey man
thanks for sharing this step by step
I followed and it works perfectly
Thanks!!
Did you follow the instructions written on the sticker?
Thanks so much for your help, finally I was able to align everything as you show.
Great video. 👍👍👍👍👍👏👏👏👏👏
This video was incredibly helpful. Thank you!
Very beautifully explained 👍
Thanks brother keep um coming
Holy shit. My battery just got dry. Actually didn't expect it's so complex to change the battery. 😂
Lifesaver, great video.
Thanks man! Excellent tutorial, very precise. Great job!
Stupid question here but should i ground myself while doing thing so no unexpected shocks blow out anything?
THANK YOU!!! That was super helpful ♥️♥️♥️
You have one of the best channels on TH-cam. Your videos are informative and have been a big help. Thank you.
Mike S. Thanks! That truly means a lot.
Your a life saver man thanks for the tutorial
Thanks for the awesome video!
This helped me! Thanks so much!
ross072566 awesome! Please subscribe if it helped. Means a lot to me.
What is the grey rubber cover part called? And is it essential? I had my battery replaced today and it immediately fogged up, took it apart and found the o-ring and rubber cover had not been put back!
Hory shit. What happened then? It's a gasket...
Awesome thank you so much this video addressed every issue I had!
Your a life savior thanks
Thanx man excellent vid.
Great job 👌👍 thank you very much 👍
is there any way to fix the compass manually.
My compass broken, when i press compass button, it not point at 12 o clock...
I just bought a GG 1000 used and when I went to change the battery, it’s missing the two gold springs and the plastic retaining ring that goes around the movement and it’s also missing that grey rubber piece. I’ll pay up for those parts if you’ve got them!!
Very easy to do with your instruction thanks
Gracias por hacer todo el trabajo. 🎉🎉🎉
Remove the gprb1000 function housing Can you put it on the cable frame gwg1000?
Any advice on getting the compass working again?? :/
Thank you very much . Helpful
Weilong Guo you’re very welcome! Thanks for watching
Great job here of showing how to do this. Thanks!
Jim Busch thanks!
Great vid ! Thanks!
🙏🙏🙏👍👍👍 watching from Nepal
Thanks for the video. I decided to change the batteries on my own it was harder than I thought lol. I took it completely apart except for the module. Had a heck of a time putting it back in. I eventually got it and I cleaned the inside of my watch too. I figured what the heck i already got my greased paw prints all up inside it. Got it back and running like new. I also used neosporin to lubricate the rubber o ring.
Emanuel Magda excellent job.. the first time is the hardest. Now you’re a pro
Hi just found your video, really helpful. Do you know what can I do, my dad’s watch doesn’t move the hands except for the seconds hand. Actually everything works on the watch except for the hands.
Thank you for this great video.
Excellent!!!!
I am frustrated with trying for the past two days to set the watch! I have followed every tutorial, including Casio website. The time mode arrow is at the 12 o’clock position. Once I have all other dials at 12 o’clock as well, in the H. Set mode, I press the adjust button once and only the hands on the watch change. The arrow in the mode window will not move or “reset” to the “time” window or the 6 o’clock position. The mode arrow will move when pressing the mode button but NEVER stops at the “time window”. Casio customer service cannot help because they are closed due to COVID state
I don't know if you're still having trouble but basically you hold adjust til it beeps a second time to adjust the hands, set the second hand to home position, press mode again to adjust the hour and minute hands, press mode a third time and you will be able to adjust the little mode dial. As a tip the home position for that one is the 12 o clock position. Then press adjust to exit the settings and it should be accurate after that.
Hey bro which watch were u wearing on the wrist.🤔🤔🤔
I'm curious
It looked pretty good
Hitesh Singla it’s the gwa1100r-4a aviator
Thank you great explanation and was really helpful I did mine thanks to you
I don't get all these negative shit comments and toxic people here. Did exactly as he explained except the module removal (which he explained well why he did it but you whiners didn't listen) and got the batteries changed, tested ALL functions and everything works. A big thanks to Gi-Shock-Go!
Thanks man! this video helped so much !
Thanks for the video!
Can i use it under water after this?
14:41 whats it called the 2 things next to strap
Can you please do a strip down of the rubber outter case on this watch please mine needs a deep clean