Cool video, looks good! Just finished my Formbot micron+ and did have some bumps on the way, partly due to the "workbench" (cough*, very old and wobbly Ikea table) I'm using not being square. Did your kit come with the 180mm gantry beam for the AB drives? My kit had 190, but 180 was specified, so I ended up building it with the older gantry and later cut it to fit the new one. Also you might find this interesting. If you use some standard M3 standoffs, nylon or brass you can mount a beacon/IDM/etc scanner directly to the x carriage. I use 20mm for mine, with Phaetus XG. Might have to try out the BZI idlers, already run BFI. Keep up the good work
Hi, Which grease do you use for linear rails?
this swags HARD 🔥🔥🔥🔥🔥🔥🔥
Cool video, looks good! Just finished my Formbot micron+ and did have some bumps on the way, partly due to the "workbench" (cough*, very old and wobbly Ikea table) I'm using not being square. Did your kit come with the 180mm gantry beam for the AB drives? My kit had 190, but 180 was specified, so I ended up building it with the older gantry and later cut it to fit the new one. Also you might find this interesting. If you use some standard M3 standoffs, nylon or brass you can mount a beacon/IDM/etc scanner directly to the x carriage. I use 20mm for mine, with Phaetus XG. Might have to try out the BZI idlers, already run BFI. Keep up the good work
what hex tray is that?
www.thingiverse.com/thing:5569567/files