(2019) ULTIMATE Stock Tank Pool DIY (NO CAULK)
ฝัง
- เผยแพร่เมื่อ 2 ก.ค. 2024
- ULTIMATE (3 step) STOCK TANK POOL DIY SETUP GUIDE: stocktankpool.net/setup
1. 1,000 GPH FILTER PUMP: stocktankpool.net
2. HOLE SAW - 2 3/4” w/ ARBOR: amzn.to/2PZOtR1
3. INLET STRAINER CONNECTOR COMBO: stocktankpool.net/strainer
4. LONG LASTING FOAM FILTER: stocktankpool.net/filter
5. INTEX PLUNGER VALVES: amzn.to/2XoVsZU
6. INTEX ADAPTERS: amzn.to/2XPCbie
7. (optional) 100% SILICONE CAULK: amzn.to/2LOYu4P
UNBOXING THE INTEX 1,500 GPH FILTER PUMP: • UNBOXING the Intex 150...
HOW-TO KEEP YOUR WATER CLEAR & BLUE: • Two SIMPLE Tips to Kee...
OTHER HEPFUL PRODUCTS:
Replacement Intex Filters (6 pack): amzn.to/2VvObm4
Chlorinating tabs (1”): amzn.to/2VyorVS
Floating chlorine tab dispenser: amzn.to/2W9Rwvn
Skimmer net w/ telescoping pole: amzn.to/2VL6s3R
I followed all of your steps and bought the parts that you recommend on the site, and I cannot say enough how straightforward and easy this was! So happy with the outcome! Thank you!
Did you have to buy all of the filters in the description?
I have been craving a stock tank pool for a few years now. Love this!!!
its so worth it!. Ryan nails it.
Man, my set worked exactly the way you described. Thanks for posting this. So helpful. 👏👏
Thanks for the awesome vid. I just had our 8' round stock tank delivered and will be using your recommended parts list as it saves me countless hours researching on my own. Thanks again!!!
Glad to help! Enjoy your stock tank pool! Related, I just posted a video about turning it into a hot tub: th-cam.com/video/nOE0T87tYx0/w-d-xo.html
How did it go?
J Fu Got it all setup and hooked up. Had to delay it a bit as Amazon messed up the order and sent me connectors for 3/4” hookup. I do need to re-level it next spring as I placed it on a bed of packed sand where our old above ground pool had been.
Just a helpful piece of info. If you find yourself like me and unable to secure a 2-3/4” hole saw (everywhere I went was sold out), a 2-5/8” will work perfectly and provides a tighter fit.
Good to know, thank you! Glad the 2-5/8" hole saw works!
A 2 5/8" hole saw provides the perfect fit for the fittings.
I've said I'm going to do one of these for 3 years now. After watching your video, I know I can do it! May not be this summer, but I definitely see it in my future.
Thanks so much for sharing this. I worked at a spa place, but kept the books. Kind of wish I'd learned to plumb a tub!
Do it! You won't regret it :) Stay tuned for my video on how to turn a stock tank pool into a hot tub so you can use all year-round :)
I followed your video and everything went very well. I am so happy. Thank you so much.👍
Hi Ryan
My wife and I want to thank you on your very informative video. It really helped our project come true. Thank you
Don and Beth, Florida
Don Kirkland glad to help! Thank you for the kind words, and I hope you enjoy your summer much more with your stock tank pool 😊
Wanted to send you a picture,but wasn't sure how to do it.
@@kirklab1 please do! hi@backyardhacks.net
Awesome video 🙌 5 ⭐️ for sure!!
Thank you 🙌 Justin!
Hi Ryan, a lot people been asking you about the missing part (outlet-fits in the bottom of tank) I had the same problem , the needed part is unavailable. So, here's what to do.
Go to Pinch-a-Penny ,get item #04430070 (1 1/2 inlet FTTG w/loc , that what's written on the receipt) . Dont ask me what used for, but it comes with 3 rubber gaskets and will do the job of siphoning the water out just fine.Also you will need the fat kind of O ring that they sell at ACE hardware. You can use it like that or you can also get a - item #31776 (1 1/2 in sch40 street elbow) and screw it to the said part and face the elbow down, close to the bottom of the tank. The part from Pinch-a-Penny is threaded on the inside also. So there you go , Mouseketeers , go have some fun. PS - the part is made by HAYWARD and the # on the bag it comes in ,the label says- SP1023G cyc locknut ftg w/dbl gskt and I paid $15.99.
Can you please show how to set up the hoses over the tank/without drilling holes, as you showed on your other video?
Thank you for all the great information!
Thanks for the info. We are in NC and are considering this!! I do want to know about how to heat it up in the winter months.
We are putting it in our screened in porch. :)
Do not grab any metal after using the hole saw it will be really hot maybe douse it with some water. Also be careful when the pilot bit breaks through it could snap your wrist or break the bit if not prepared. I suggest making a pilot hole before using the hole saw to save any risk
Thanks for the video
Great video. Excellent safety plug at the end.
Thanks for the video. Now, could you tell me how to make a cover for this tank in order to keep out the bugs. Also, is there way to decorate the inside of the tank with paint or tile, etc. Thanks again
Thanks for the helpful video. On your website, you show the additional parts needed to complete the setup. If we decided to buy the sand filter you suggest instead, do we order the same additional parts or is there another list of parts to purchase?
This video made set up EASY. I also watched the other videos (i.e. unpacking filter) which also helped. One area that I need guidance on is buying the right vacuum for my stock tank pool. The sand/dirt needs to be cleaned out and the filter does not do it. You have addressed just about everything except cleaning the bottom, so please help with a recommendation!
This pool vacuum is powered by a regular garden hose and works surprisingly well: www.amazon.com/PoolSupplyTown-Pool-Jacuzzi-Vacuum-Cleaner/dp/B008JAJSBK/ref=sr_1_6?keywords=pool+vacuum&qid=1566561451&s=gateway&sr=8-6
Excellent video. Thanks. But where do you add the silicone for sealant?
How about a video on how to get started with the pump!!
Hey there, thank you so much for sharing your knowledge with us! I have a question about other uses: how strong is the pull of that pump? Would this be safe for ducks, or would they get stuck on the inlet when they dive? Would the pump and filter be able to handle crud like they produce? I'm emptying and refilling mine to clean it at the moment and I'm researching alternatives! Thanks a whole lot! 😁
Great vid thanks. Just one question from me: how many volts is your drill and what sort of hole saw bit is that? Off to home Depot tomorrow morning. Thx!!
I installed a stock tank pool last year. Now I need some help learning how to re-open it !
This is all well and good however the outlet parts aren't available anywhere. So now I have all the other stuff and can't even set up my pool!
I wish we could get these over here in the uk
Thanks for the great video
One question?
I couldn't find the 1500 filter pump i did find the 1000 besides the hose adapters is that ill i need to buy extra besides the other parts u have on the links?
0:43 LOL: "1500 gallon per minute pump" - it also serves as a rocket booster down there in Houston. ;)
Hello. Great Video. Where do I get the white inlet piece? I am buyting all the others but I am not seeing where to get the top white one. Please help!
If you own the house you should consider making a in ground concrete pool. Its not as hard as one would think. If you take your time, and do it right. it will up the value of your home. and also get a great sense of accomplishment.
I need to know about the jet/outlet fittings!
Saaaaaaahhhh weeeeet!!!!
This is the best Stock Tank Pool DIY I have seen. The only difference was I added a liner and padding.
i am trying to do a stock tank with liner this year. How did you cut the liner and seal around inelt/outlet?
@@sarahcharlton5450 I put down the padding... I used a length of garden hose in the corners (might be overkill), taping it to keep it in place, then put in the liner. Once it was snug all over (there is an overlap t the top) I cut the liner to match the holes in the tank. The padding helps seal the inside, there is a washer for the outside.
Tip: Be sure to have an extra regulator (they are cheesy and my first one leaked). O-ring lube helps the rubber washers stay pliable (I dismantle / bring in my pump each fall). Have fun!
Hey man, thanks so much for posting this we are stoked! Are there any considerations for equipotential bonding or the like to divert electricity away from the pool and pump? Thanks for your help.
Jeremy Altfeder good question! If you have any metal or conducting material within reaching distance (or 6’) of your steel tank, you should bond it to that material using an 8 gauge wire. Or relocate the tank. The filter pump is designed for pools and has a GFI built into the plug. Bonding is an extra layer of safety, but is highly recommended.
Can you use a portable spa pump for this design? And can the heat function be used for it to make it a hot tub. Thanks!
We set everything up and it’s working perfectly thanks to you. But we asked our electrician to come and hardwire it and he mentioned hat he would also have to bond the pool since it’s metal. I have never heard of anyone with a stock tank doing this. Do you have any idea?
With intex sold out this seems appropriate this year
One of the most helpful videos, thanks! One question, I have a pea gravel surface where I'm planning to put it, do you think that's ok, or should I put sand down first as a couple sites have recommended? Thanks!
Hi Ellie! Pea gravel should be fine! "Pointy" rocks or anything bigger than 1/2" will make little dents in the bottom of the tank though.
I see this pump comes with 1.5'' hoses. But the Intex Inlet Strainer W Valve kit you suggest says it comes with 2 strainer connectors for 1.25'' fittings. Will this all work together? Thanks in advance for your time and thanks for the video!
Have you found any other options for the inlet strainer? There is a long wait.
Are the 3D printed inlet strainers currently in stock? If not, do you know when they will be?
Excellent video! Lots of great info. Curious to see how you make the hot tub modifications
Thanks Marc! Appreciate the kind words :) I just finished building a deck around the pool so the hot tub project is next! It should be coming in the next few weeks! Stay tuned.
@@stocktankpools4980 Your tip about the valves was priceless! I have everthing else already and was going to set up this weekend but now waiting for the valves to be delivered. I'll keep you posted!
@@stocktankpools4980 got the pool up and running yesterday, will do the deck this weekend. Made one slight modification from your setup,,, I put the return jet in between the top rim and first rib... not sure how I pulled it off but it worked. Now I'm thinking about getting a second return nozzle and splitting it so I have one high and one low
Marc Malone Good thinking, did you make it work without caulking the return / outlet?
@@stocktankpools4980 no caulking needed, no issues with the return, the outlet had a very slow drip, tightened more (by hand) the next day and all looks good. I'll have to send some pics.
What happens if you use the pump without the inlet strainer? And can you just DIY some kind of mesh/screen until they come back in stock?
For a personal stock tank for 1 person Is? The 100 gal Rubbermaid Stock Tank. I dearly love it> Yes 2 people can get in it! But its more comfortable for 1> I just got it today, from TSC for 119 dollars out the door. I've been it 3x today he hee. Like i said i love it. Going to make a top for it, and Maybe a pump filter. This will save on water. I can always make a Jacuzzi out of it, or a fish tank
I am having trouble finding the best way inlet/valve combo. When I click the link it doesn't take me to the right place.
My pump seems to have air bubbles - can you help identify cause and steps to fix it? Thanks!
How loud is that pump? It seems really loud in the video. Also, how often do you run the pump? I know you said there is a timer. So you just plug it in and let it do its thing?
Hi! I don’t see a link for the bestway inlet and not sure how to find it. Can you link to that?
Can you please post a link for your pool pump? Thank you
In the video, you said the outlet valve, "BestWay"?? was included in the links below, but I never saw a link for it.
I'm looking for this too
Still the best products to use to date? or anything better out now ?
I need help! Been working on our stock tank for two months now and can’t seem to get it to work. Is there anyway I can run some stuff by you?
I have a question. 3B says as an alternative to 3A, I should get the 3 parts listed, plus #5. then when you look at #5, it says not needed if you are purchasing 3B. any thoughts on that?
I am installing a stock tank 8'. Where can I purchase the Intex 1500 GPH Model # 635T, Out put valve to pump? The pump I ordered did not include it. I am having a hard time locating a company that carries it.
Thanks for making these videos! Going with the setup you’re recommending but thinking about upgrading to the Intex pump with the sand filter. Do you think it will work just as well?
Yep, the Intex 10" sand filter is a great alternative! Link here >>> amzn.to/3bClxHT
Stock Tank Pools already ordered! Now if I can only find a stock tank in stock in California! Lol
Have you ever patched a hole in the bottom of the tank? Any suggestions?
Why do you need the valve with the Intex outlet?
Can this pump setup be plugged into just a regular outlet/socket that I have in my back patio, or is it too much for a regular outlet? Also, this is a great DIY and it gives me a lot of confidence in setting my stock tank pool up! So excited and waiting for al the parts to arrive!
Sarah Couvillon happy to help! It’s totally doable! And yes, the filter pump plugs into a standard 120V outlet. Easy peasy 😁
Can you put the same pump setup on a poly pool?
if I install 1 8' and 2 6' stock tanks will I need 3 pumps or can one big pump handle all 3?
Has anyone tried to use a saluspa filter/heater with at stock tank pool? My Colman inflatable hot tub popped
Hey Dude! great installation, please🙏 come to yard & install mine,😄,I wish tho, I have all the supplies & items for my stock pool,i ordered everything from Amazon,i,m just hesitant about the drilling step,don,t want to screw up my galvanized tub. All I need is that part that goes on the drill & like u said stay clear from the rib cage,i pray everything will turn out great for me, thanks for the video it will help me a lot. 👍
Be careful not to let the drill slide up or down. If it slides too close to the inside ridge (bump), the fitting won't seal. Mine slipped, so I had to patch it and drill another.
Where do I get the return jet kit?
Where can I get an outlet with gasket and locking nut?
I wish I would get them in England
This was so great and easy. Thank you. I am having trouble my intank pump it doesn’t pull or extract water like in your video any tips???
Hmm, try unscrewing the valve on top of the pump to release air from it, once water comes out then screw it back in. Otherwise either your valves may be closed or the hoses are reversed?
Do we need both inlet strainers? I’m slightly confused?! I ordered everything off the list and now have the dark grey one and the white one. Meanwhile there’s only two holes to drill…someone please help!
If you get 3b alternate inlet strainer, do you need to get a different size hole saw (ex. 2-1/2" instead of 2-3/4")? I noticed 3b is 2-1/4" in lieu of the 2-1/2" you mentioned 3a was. Great videos by the way! :)
jennifer schubert great question! The inlet on 3b should be exactly the same size as the outlet that comes with the pump, so it should be fine. They might be referring to inside diameter of the threads, which is slightly narrower than the outside.
I just bought the 8ft plastic stock tank from TSC. Do you think the fit of the components will work against the plastic sidewall without silicone? Bummer about the missing part, I hadn't put much thought about using a pump but now have a shopping list and new a perspective, thank you for this!
I would say yes. I got the galvanized one, but as long as the sides are smooth and flush against the fittings, you should be good.
i got an inflow nozzle that says for 1900 gal and up. will it work with 1500 gal pump?
Hello can a 2500 filter be used instead of the 1500
Stupid question some of you may know this question. We wanna go 100% solar no hydro. Anyway we can do this without sacrificing the pools water? We are also looking to do this all year round even in the winter. We have a covered gazebo which we will be using :). Debating of just buying a hot tub but they cost way to much especially the hydro! I can get one for free right now and apparently it works but don’t wanna spend the money on an electrician and operating it via hydro!
Can you add this to a wood burning hot tub?
Where can I see the list of pump and other supplies that you use here? I want to do this pls help where I can find it.
At 3:45 you mention a fitting that comes with the Intex pump. People say it doesn't come with that, only the hoses. Confused and need help ordering everything I need for the 8x2 stock tank pool I want to build...
Doesn't come with it. You must buy the inlet separate or buy another outlet valve from Intex and use that.
Telling me where you got the parts
Just purchased the inlet strainer connector combo; so does this connect to one of the intex vales (ordered a two pack from Amazon)? The inlet strainer on the video is different; just making sure I have all I need.
Thanks,
Peppersfool
really wish someone would reply to this one @stocktankpools
Anyone ground/bond their stock tank pool using this same filter/pool set up. I just finished setting mine up and have not seen any videos talking about doing this. Just wanted to see if this filter system, etc. prevented any current running to the pool, etc.
Wish I could post a picture inspired by this video to the comments 😩
I wish you could too! Are you on Facebook or Instagram?
So, I put together the entire thing (with Caulk) and it looks great. One final question though: have you experienced any rusting or corrosion with the chlorine? I am a bit concerned about that. I read some people coat the entire inside with Flex Seal to prevent corrosion. Does it work?
Thanks again for the video! It was extremely helpful!
Great question! I have been using 2-3 one inch tabs per week and haven't experienced any premature corrosion so far. This results in free chlorine levels at about the same level as our drinking water (1-4 PPM), so its enough to keep algae and bugs from growing, but its not offensive. That said, DO NOT let the chlorine tabs (or small pieces) fall on the bottom of the tank they will corrode it. I had one sit on the bottom for a day and it left a mark.
@@stocktankpools4980 what should one do for existing rust spots before refilling? Just watch and swap for a new pool when it gets really bad? Or is there a way to treat? We had no issues in summer 1. This year we flipped to prep and refill there are a few rust spots. Will it cloud the water? So we just roll with it as these pools are somewhat temporary anyway? Thank you! 🌞
Where did you find the bestway inlet combo? I actually have a bestway pump that im trying to use for my stock tank and the intex plunger valves dont fit
Haylie Gentilozzi it sold out about a month ago. In the meantime I started selling 3D printed inlet kits here! Stocktankpool.net/strainer
Have you seen this work with a poly stock tank as opposed to the galvanized tanks?
Yep! Poly tanks work too!
Hey I was wondering if the gfi on my stock tank pool pump Intex 1500 makes you safe from being electrocuted. Someone posted something on Facebook about it and I want to make sure it’s safe.
Maria Hunter the pump with a GFI plug is safe. They’re made for steel-framed above ground pools.
I'd like to add a spigot to the existing drain plug on my tank. Do you have any recommendations?
If i remember right the drain is a threaded 1" port so you'd need an adapter to neck it down to say garden hose size. From there a ball valve would work to control the drain. Screw in a hose, open the drain, done. But i'd have to see it to be sure. Depending on where you get the tank and who made it, it might vary..
I can’t find a inlet valve they are sold out on amazon. What is the link to where you got the different one than Intex? thanks
J12 Ranch and Livestock Osguthorpe yep, they have been MUCH more popular than I anticipated this year. Here’s an alternative: amzn.to/2IzDZ7D
It’s more expensive and slower shipping but I can’t find them anywhere else 😑
@@stocktankpools4980 Here are the ones I got... www.amazon.com/Intex-26005E-LARGE-Fittings-1900-2500GPH-Strainers/dp/B07NY58MCC (a little pricey, but it was getting hot outside!)
I’ve seen your video on no drill stock tank... but we don’t really understand how that works... does it work? We don’t want to have to drill ours and just use the full tank... we are also having trouble getting the pump/and filter... trouble finding them. Any suggestion on the beat for no drill and suggestions how to make it work best
Amanda Theiben same question. Don’t want to drill. Can you just hang hoses over side?
Amazon for the pump. They are price gouging like crazy though. I just paid 300 for a sand filter Intex 16inch. As far as the hoses just hang over side and secure with clamps. (Make sure it’s really secure) I would cut the holes though. Much more clean install
We finished our set up last night and we realized that the brand new stock tank has a small leak on the bottom seal. We only lost half an inch of water over night but I was wondering if you have any tips on how to fix the leak. Thank you. Great videos!!!
Try caulking it. You'll have to drain the tank and repair it.
Use some J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick
The filter is out of stock EVERYWHERE! Is there any alternative option you would recommend? Thank you for these videos!!!
Keep an eye on ebay. Mine is supposed to arrive this week.
@@brannonchurch thank you! I am keeping an eye...of course people are price gouging! LOL
Hi. Do you close it for winter? Do you disassemble the pump and everything?
Truthfully, I left it connected and full last winter and it did fine (surprisingly). It froze over multiple times. I was worried the pump broke due to freezing, but it started right up without any leaks. This year, I'm planning to close the valves, disconnect the pump and and leave it full
We've been able to locate all of the parts except for the strainer nut (intex #10256). Does anyone know of an alternative for this part? Thanks for the video!
same
Thanks for this video! Could you please tell me what is the purpose of the inlet/valve combo you show? Does the Intex pump come without any valves? Meaning, am I supposed to just plug them directly to the pool? And why did you use a different brand? I'm a bit confused because later in the video you show a pair of Intex valves and toss one of them away...
Also, what is the diameter of the hoses? I ordered the 2500 gph intex pump but can't find info on the hose size to buy all the other stuff before the pump arrives
Thanks!
Hello! Alejandro! Good questions! The pump does not come with any valves, but they are strongly recommended to make it easier to change the filters (without getting water in your lap). The Bestway combo came with the threaded inlet strainer connector (the dark gray part) and one valve. However, I ordered a two pack of valves from Intex (I would have ordered a single pack but they weren't available at the time, but they are now). The pump does *not* come with the threaded inlet strainer, but it does come with the threaded outlet connector (this is the lighter gray part that jets into the pool). The hoses are the same diameter as your pump (1.5" diameter). The inlet strainer is currently sold out pretty much everywhere at the moment, but I'm working on manufacturing a replacement which should be available in a few weeks! Stay tuned!
@@stocktankpools4980 Thanks for the thorough response! I ended up buying a kit I found online with two valves and what seemed to be the inlet strainer... I hope it works!
Alejandro Gutiérrez hi
Did your inlet strainer work. I’m desperate to get my stock tank pool going. I can’t find one anywhere
@@brianplaster7853 I bought this kit, which now shows as out of stock: www.walmart.com/ip/Intex-26005E-Above-Ground-Swimming-Pool-Inlet-Air-Water-Jet-Replacement-Part-Kit/976218084 and it has the strainer as well as an extra inlet, which is not useful because the pump comes with one. I haven't finished putting everything together, but it seems it will work!
Hi, I'm installing a 10' stock tank and I'm having trouble locating the Bestway inlet combo. DO you have a part number available?
I'd love to find a 10'! Enjoy
We have the Intex pump recommended in the video. We have hit the 2 week mark and noticed a significant decrease in the water flow in and out. I cleaned out the filter, primed the pump and now barely feel any type of water coming out. No bubbles like it was in the beginning. All air has been cleared out of the lines and the pump... Any suggestions??
Hey Sara! There might be a clog where the hose connects to the pump (there’s another small strainer there). Close your valves and disconnect both hoses from the pump and see if anything is stuck there.
Can you please clarify what parts are necessary? Do I just need to order 3a and 5 or do I need to order 3b as well? Thanks in advance.
Look in description
My only question is will the pool chemicals cause the galvanized stock tanks to rust or corrode over time? I've heard it might be a good idea to flex seal the inside of the metal pools to protect the metal. Thoughts? Great Video!
Aaron Wehrle thanks! I’d advise against painting anything on the inside of the pool, the galvanized zinc coating resists just about everything, including rust and paint. Others have done it and it just peels. They’re made for farms and farm animals so they’re pretty tough!
@@stocktankpools4980 sounds good. Less expense anyway lol
Would this work in a winter climate such as a winter in Canada or would the steel tub freeze the water?
Tristan amor Hi Tristan! I’ve left mine filled through the winter in Nashville and it has had 3-4” of ice without issue (I’m surprised the pump didn’t burst tbh). That said, I wouldn’t recommend leaving it frozen all winter. Others in Canada already have them.
I saw someone else say they couldn’t find the pump either. Any recommendations for us? I can only find it used as a collectible on amazon and it’s not available on their site
Keep checking amazon (prime shipping only) for pool pump and they will pop up and sell immediately. People are price gouging like crazy. I found a intex sand filter pump for 300 on amazon brand new. Good luck !
Help! I have the intex krystal 2500 and I’m struggling how to install the inlet without buying the extra piece (it’s sold out) can you help with ok how to do the inlet with only what is in the box?
Hi Tazia! The Intex pumps come with the outlet jet, but the inlet strainer and nut from Intex is sold out. To alleviate this, I designed and started selling my own inlet strainer kits here! stocktankpool.net/strainer
I feel like I have the pieces but somehow it’s not working!
Ok so is there another option for the inlet strainer with valve since it/s sold out?
jmfm0911 yep! See the link in the description, I posted on the blog about it!
How would you install the pump if you want to put the tank below ground?
Daniel Eggers good question! I’ve seen some create a cavity on one side of their tank for the filter pump, hoses, and fittings.