Minelab Equinox 800 Going Deeper [Deep Settings & Tips]
ฝัง
- เผยแพร่เมื่อ 7 มิ.ย. 2024
- Minelab Equinox 800 going deeper is a video explaining the settings I use to get the MAXIMUM depth out of the Minelab Equinox 800. This video is packed with valuable information that will help you find the deeper and older targets. Watch this video till the end so you don't miss any part of it. Get the most out of your metal detector!
Thank you for joining @SodBustersMetalDetecting on another Minelab Equinox Tutorial.
SOD BUSTERS METAL DETECTING MERCH: sod-busters-metal-detecting.m...
To Inquire about our HATS: E-mail sodbustersmetaldetecting@gmail.com
SOD BUSTERS METAL DETECTING GROUP: bit.ly/3Cw1j17
FOR ALL OF YOUR METAL DETECTING PRODUCTS, REFER TO THE LINKS BELOW.
DISCLAIMER: This video and description contains affiliate links. When you mention MY CHANNEL with your purchase, I will receive a small commission. THANK YOU FOR YOUR SUPPORT!
GET A FREE Sod Busters Metal Detecting Hat with the Purchase of any Minelab metal detector of $500.00 or more WHEN YOU MENTION "Sod Busters Metal Detecting"
FOR ALL OF YOUR METAL DETECTING SUPPLIES: outlawmetaldetectors.com/
RECEIVE FULL TECH SUPPORT WHEN YOU ORDER FROM outlawmetaldetectors.com/ Tell them Sod Busters Metal Detecting sent you.
MINELAB METAL DETECTORS
EQUINOX 800: bit.ly/3s2Wszy
EQUINOX 600: bit.ly/3ixIjap
VANQUISH 540 PRO PACK: bit.ly/3xADl0X
VANQUISH 540: bit.ly/37CE1Z3
VANQUISH 440: bit.ly/3As5ucr
VANQUISH 340: bit.ly/3xGs0wE
WATER DETECTOR
EXCALIBER II: bit.ly/3fMoo5O
GOLD DETECTORS
CTX 3030: bit.ly/3fRaE9Y
GPX 5000: bit.ly/37zC0wZ
GOLD MONSTER 1000: bit.ly/3xzwNjo
GPX 6000: bit.ly/3xxhuHL
GPZ 7000: bit.ly/3iwYJQA
MINELAB PINPOINTERS
PRO FIND 35: bit.ly/2X8gnSh - บันเทิง
![Minelab Equinox 800 [Settings For Trashy Ground]](http://i.ytimg.com/vi/kxApwAnSXvo/mqdefault.jpg)
![Minelab Equinox 800 [Settings For Trashy Ground]](/img/tr.png)
![Minelab Equinox 800 How To Save Custom Settings & User Profile [Equinox 800 Settings]](http://i.ytimg.com/vi/xIjHJA-YN5o/mqdefault.jpg)
For more Equinox Tutorials go here th-cam.com/play/PLjrtO2dCo3KHkjtqTrlcCWu4Q6OpFeyIL.html
For metal detecting supplies go to outlawmetaldetectors.com
Do you dig faint targets that you cant pinpoint w/ the detector or that are not consistently repeatable?
Mike in this video I demonstrate a Sketchy signal that I did so people get an idea. Let me know if this helps. th-cam.com/video/sokHZOuWyZ8/w-d-xo.html
How do u order your sodbuster shirts?
@@rockbuttles4692 sod-busters-metal-detecting.myspreadshop.com/
First of all, I really appreciate you for taking the time on this course. Second, it was one of the best courses that I've seen so far about the ground setting, iron bias, and recovery speed. I wish to see some more & more & more video about this amazing machine from you.
You got it my friend, here is a playlist of equinox videos for you. And you can also find my Sod Busters Metal Detecting Facebook group as well th-cam.com/play/PLjrtO2dCo3KHkjtqTrlcCWu4Q6OpFeyIL.html
@@SodBustersMetalDetecting Thanks for your Facebook invitation now! -Alex
Always enjoy your helpful videos!
Thanks for watching
best, most informative video I've seen on getting deeper, and no fluff! thank you so much
Thanks for watching
Love your videos, I’m just learning my Nox 800 and you help me so much
I'm glad to help. Feel free to find Sod Busters Metal Detecting Facebook group as well
Some very good tips. Thank you!
Thank you for watching 😊
One of the best Videos I have watched
Thank you, I have more tutorials on my channel also
Excellent and straightforward 👍Thanks
Thanks for watching
Ty for sharing this video, I will start using these settings and techniques on my next outing. Keep your videos coming please.
Will do, thanks for watching
I learn a lot from your informational videos thanks!
Thank you for watching
Your video FIRST, (of many), I've watched on the 800 that even dares going to "1" on the Recovery setting. Thanks.
Thank you for the easy to understand tutorial. I have watched this video about four times because I have CRS. :) This time I took notes!
Lol I have the same thing my friend lol
You are giving EXCELLENT TIPS.... THANK U VERY MUCH !!!!!!
Thank you James, I appreciate you watching
Thank you so much for these training videos! I appreciate them so much! I've really learned a lot from you and I'm going to teach my grandkids as well. Just got my Nox 800 Saturday but I've found my first coin in my yard already. 😊
Thats awesome Evelyn. Feel free to also find Sod Busters Metal Detecting Facebook group and I can answer questions and you can post your finds 😊
@@SodBustersMetalDetecting Facebook Group?! Cool!! Will do!!
Great video!👍
I just got my box 800 last Friday and I love it so far . I’ve upgraded from the Garrett AT PRO and that machine was. It a deep digging machine as far as I was concerned.
Thanks for the video. Great info
Thanks for watching
Just finished reading my Minelab Equinox 800 manual, I can't wait to start hunting.
One thing I noticed was when you were setting your iron Fe setting to zero you forgot to press the accept/ reject button which takes you to the F2 Iron setting which detects a wider range and some iron the the Fe iron setting doesn't per the Manual. Have to remember that the F2 settings work best when doing all metal mode with iron tone audible which you stated you would be doing.
Also ground balance auto tracking is the default and recommended for when gold prospecting and manual ground balancing is not in the advanced settings.
Sorry as I'm not trying to be critical because it is a lot to comprehend let alone explain which you did a great job but it's also important for new people to fully understand all of theses various settings and how to use them to our advantage.
Very nice video.
Very informative video. Even tho I've been detecting for almost 10 years - over 2 of them with the 800, I learned a few few things and was reminded of others. Keep up the good work!
Thank you for watching
@@SodBustersMetalDetecting went you said deep how deep this goes?
I have found coins at about 14 inches. It varies on ground conditions and the item being detected.
@@SodBustersMetalDetecting do you think this machine will pick targets under 10’ like it says in the general description?
@@samuelaguilar9688 not 10 feet. If it is coin size targets you can expect up to a foot and maybe a little more in the right conditions
Great info im still learning and I will try this thank u!
You are very welcome. Happy hunting
Excellent video
Thank you for sharing info.
Thank you, I appreciate you watching
Thanks, May i ask how can thease settings be saved to the detector
Great! very helpful. machine is set up and ready to go. Thanks.
Awesome, thanks for watching and good luck
Hi Larry, John "The Nuts" Gomez here to let you know that this video is great, I seen this a year age and I didn't reply and I should have:-). This is the best break down and explanation of how to recover deep targets. The low and slow recovery speed adjusted to 1 recovery and FE to 0 was spot on and not always for all locations, like you said parks as an example:-). Thank you again, The Nuts!
Thanks Brother I appreciate you. Good luck hunting my friend
Thank you for this video , still learning ; greetings from Puerto Rico... !
Thanks for watching
Very GOOD TIPS. THANKS !!!!!
Thank you for watching
Very please to here someone who explain the equinox 800 settings very well. It will be great to get out to try the settings you have explained.Carry on with the good work. From the UK.
Thank you for the kind words. Feel free to adjust the settings for your situation, I have another video coming out Thursday say keep an eye out
I need a day to just chill so basically I am watching your videos today thanks
Awesome! I appreciate you watching
Great tutorial
Thank you
I have watched this video over and over ,, very clear advice,, if you search with an 800 it’s a must ,,
Thank you for watching 😊
You.re right on the money, excellent advice. Good for the 600 also.
Thanks for watching Daniel
Thanks for the tip! I'm have a equinox 800 and i ussualy a f2 in 3 but now iam using a 1! Thanks!
Just be sure to slow your sweep speed as well
Still love watching your videos learning a lot
I appreciate you watching, find a pot of Gold Juanita
thanks for the great content . Nice to see and hear good it to learn from this with my 800 that I just get. I am new here in this scene but I learned a lot. Greetings from the Netherlands.
Glad I could help, I have other equinox tutorials on my channel as well. Happy hunting
One of my nicest coins is a 1775 kg3 that was a one way beep that was around 12 inches .. it was just enough to say dig me and I’m glad I did because the condition was fantastic another one was iron grunt on the max with a high tone right next to it ..usually bigger iron can give these signals off to the side and because I dug a liberty cap nearby I dug everything and on edge was the most beautiful green Connecticut copper that I had gods blessing to reveal with my brother ! Thanks for the videos !!
That's awesome, congratulations!
Great video, down to the point, that's how it should be told to become a good Detectorists.
Thanks for watching
Another great video! I have been using Andy Sabisch's book lately and there is some great info in there too. But your videos are so damn helpful. By the time I got his book I was able to skim through the first part of the book because you had already taught me about all the buttons and advanced settings.
Awesome Joseph, I am glad I was able to help. Find a pot of gold my friend
Great video always learning. It is also good to revisit before spring. That being said I was out in the snow trying the new settings. I am going to run park 1 and Field 2 in the same locations and see what pops up. I use the Field 2 settings and found two dimes and three more pennies, but the location is the size of 1/2 a football field. I do have one question about the saved settings. When we save a setting is that for all 8 search profiles or just the location the profile that was changed. Also when we start the 800 do I need to press the user profile button or will the program start with the boot up. Thank you for the videos and help
Only the location of the profile you set it in
I just got my Nox 800 today, I was using a Garrett 400i. This video gave me better set up tips and info than the Manual. Thanks for the info I've just subscribed. Out tomorrow for the first time with it in Wales, U.K. Going to go over a field I've been over a dozen times and stripped it of Georgian coins, lets see if the Nox finds anything else
Glad it helped you out. Thanks for watching
Just ordered my nox, I’m excited like a little boy on Christmas.
Awesome, you will love it
u wont regret it
@@coldmidgetts got your message 1hour ago as well as a ups delivery 📦 , you must have ESP.
👍@@p52893
I got my skirt today and it fits perfect thank you so much and good luck metal detecting buddy
Hello John, I hope you received the shirt as well 😂🤣 I got a kick out of that. Glad you got it my friend. Happy hunting
happy hunting to you to I got my equinnox back today all so so I'm really to go thanks again
thanks for the sticker that's cool I wish they was a place on my equinnox to put it I guess I'll put in on my back glass of my truck
Your welcome
Interesting video. Just curious if you have a test garden. I would recommend using the threshold at an just audio level. When a target gets beyond the “faint signal “ and the detector does not give you an audio response you still could catch it with a “ghost whisper” which you will hear as a break in your threshold. Just a friendly tip. I’ve been able to get silver with my nox 800 at 14 inches. Appreciate your video , thanks for sharing.
Thanks for the tip Phil and thank you for watching. Happy hunting
@@SodBustersMetalDetecting my congratulations for the good device and for the passion in your words ..very good tutorial for me the best in youtube . . good hunt sir
Thank you, I appreciate you watching
Has anyone experienced difficulty switching the nox on and off , I seem to have to search for a sweet spot
I haven't
If you would fix your coil wire, it will help you a lot with the ground balancing and optimal performance! It will also help you save money due to not loosen the insulation within the packing of the cables / wiring
circuit. Especially w/ a 15” coil but it’s recommended for all.
You run the wire straight up the rod by using cable ties separating the wire from lower rod. Be sure u leave a little-slack to account for when laying machine down and coil lays flat. Then start wrapping your cable when reaching secondary rod and using the velcro strap to help with keeping the cable tight and out of the way. Just something I learned from the Sr. Engineer at Minelab. Not too many of them tell you this because they want to sell you more coils and for you to send machine in for service when you cannot figure out what’s wrong after warranty. They are great company but are just like every company, they wNt to make profits! Just like the Auto Makers do not give you ALL the best practices when selling you a new car! They are wanting the service work and parts revenue later down the road. 👁
I'm buying an equinox 800 soon and I think with your videos it will be much easier for me to handle it.. Thanks for the great tips 🍺
Contact outlawmetaldetectors.com for your purchase
Get a 900 why get a 800
Very helpful. I am still just turning on and going.
Feel free to find Sod Busters Metal Detecting Facebook group, I am available for questions whenever you have them.
Love the Bear 💪 another great tip on hunting that I use often is when I get a good tone I want to dig I lift my coil off the ground if the sound goes away I know that it is a deep target
Great point. Thanks for watching Jay
thank you for your good time
im asking for horizantal searching
i have old wall so can i search the wall using the same sitting u explain ???
Yes
Great video. Thanks for taking the time to explain these settings. I detect at the beach and just want to make sure the lower recovery speed will be okay at 1 or should it be higher in that kind of mineralization. Thank you!
1 should work just be sure to slow your sweep speed also.
Okay great thanks. I'll give it a try out here on the FL treasure coast. Happy new year!
Where did you get your ears saver for your coil the red device?
Great video i have had my nox about 800 about a year and a half/2 years running the coiltek 15in and loving that upgrade have recently started trying advanced settings found your video very helpful and easy too understand thank you so much for that
I used too hunt in mode 1 when i started then moved onto mode 2
"park 1/park 2"
I hear mode 1 focuses on lower frequencies even though its in milti frequency and does that it emphasizes on the lower frequencies in mode 1 giving you more depth as apposed too mode too so im deciding which mode is for better depth considering moving back too mode 1 but am a bit unsure of which mode is better for depth or was i given bad info on that
Also will start tying field modes out looks great
Also hear running 50 tones as apposed too 5 helps with giving stable target id numbers?
Wpuld you reccomend iron f2 over the old fe
Been running f2
Kind regards,
Chris from sydney Australia :)
Helpful video. What recovery settings do you use in heavy iron? I mean homesite machine gun nails everywhere iron? Thanks
It really depends on your preference, I really don't like going higher than 3 or 4 but if it is really trashy, I recommend putting on the 6" coil so you have better target separation.
Good clear instruction ....good job! (From a rookie).
Thank you
That’s awesome thank you very much
You bet, feel free to join the Sod Busters Metal Detecting Facebook group if you'd like
@@SodBustersMetalDetecting I don’t do Facebook but thanks .
I found some pretty cool stuff with my old machine . And I just love this hobby . I go out almost everyday. I’m excited to hit some honey holes with my new machine and getting those deep targets
I’m in Portland Oregon area.
Keep me informed and good luck
Hi mate good videos you explain stuff well I have got one question do you have to ground balance the machine every time you turn it on or once it’s balanced will it save for you to not do it again thanks
In most cases you don't even need to ground balance unless you are in a highly mineralized area. If you ground balance I recommend you ground balance every so often as the ground changes from one spot to another so you may need to gb throughout the day even.
Great video good info can you tell me what is the value of the fe2 mode cheers
I'm not sure what you mean by value. The fE vs F2 is f2 was modified to reject bottle caps.
Thanks for your video, I use use field 2 on my 800, and I`ve found deep good targets found using 10khz & then tested the same good deep target using multi & on quite a few occassions the multi hasnt picked it up, I`ve tried this a number of times, I also told a fellow detectorist this & he said that shouldnt of happened.
Nice, these type of tests tell the story. Happy hunting
I watch this video almost a year ago and it was helpful then... and I just rewatched it today and I picked up a couple things that I missed the first time ....and I'll tell you why.... I hear many equinox users pushing hard on that 4K... And I think single frequency is great and certain situations... they don't have that in Beach mode just multi so I've never really used it.... And to be honest I upgraded one of my 800s to the latest version.. and I really didn't like it so I took it back down to the previous version.... So multi is what I used cuz of the beach... But recently I've started doing some inland searching here in Florida so it will be helpful possibly some scenarios...great video..... I'm looking forward to the new release from minelab for the new equinox. Good luck and happy hunting.
Thank you I'm glad it is helpful. Feel free to find Sod Busters Metal Detecting Facebook group as well
thank you for video presentation. a lot of peaple on youtube talk about going deeper but nobody say numbers.
Your welcome
Another great video! I started watching you when i got my Nox, you where a big help starting out, Thank you! lm pretty confident with it now,. Best find so far is a small cash of 7 dimes 1894-1907.
Good call on the All Metal! BUT, for me i run 0 Iron Bias & ALMOST knock out the iron with the advanced volume, so you dont mask a good target. Im also a desert hunter so MOST targets aren't that deep. Another good one is to watch your cell phone!! It can make the Nox chatter!!
Keep up the god video's!! Thanks again
Thanks for watching, I will run 0 IB most of the time as well but for beginners it isn't recommended until they learn tones. Good luck and congrats on the cashe
1894-1907
@@harley092355
LOL. yep, thats what i meant. cool find regardless.
Hey thx for the video! What was your coin shooting program?
It varies depending on the ground conditions. I will be doing a northern related video this week
Hello, thank you very much for the informed videos you upload, I have a question for you about your experience with the two Minelab metal detectors.
My question is: Can you provide me with settings of Minelab Equinox 800 only for native gold in the river and on the shore, which settings are analogous to the depth as of Minelab gold monster 1000
thank you in advance
Unfortunately I don't have any experience with the Gold Monster so I can't really give you comparisons. The equinox has 2 gold prospecting modes and is very sensitive to even the smallest pieces. Both the depth and setting will be dependent on the ground conditions and the coil you use.
very good..
saludos desde Chile
Thank you for watching
I am really impressed with the reviews on Minelab metal detectors. What is your take though on the Vanquish 540 versus say the Equinox 600 or 800? It seems to have a lot of the same settings as the 800 and the price is 300.00 cheaper. It does operate in multiply frequencies, but Minelab nor anyone else seems to know the frequencies? Any information on it would be great!
I don't personally have any experience with the Vanquish so I couldn't really say. You can't go wrong with the equinox though it is a great machine
Thank you for all the time and effort you put into your tutorial videos. I own an Equinox 800 and it is one awesome metal detector.
I would like to know where you purchased your red coil tab strengthener from as I would like to purchase a couple of them for my
6-inch and 11-inch coil. Thank you, Joe
Thank you Joseph. You can find them on ebay.
Top man
Thank you
Larry. As far as high to low tones do you have a video explaining the difference?
Hello tim I have this one th-cam.com/video/VPA6JdWzK3M/w-d-xo.html
😂 That Damn link 😂
Good info brother 🤙🏴
Thanks for watching
What version OS are you running?
dose the 600 have the same setting options as the 800? When using multi freq dose having the extra 20,40 of the 800 help?
I'm getting ready to buy one and if I go with the 600 I don't want to later regret that I did not buy the 800.
Your tips are great and will come in handy when I do get my new detector.
I would recommend going with the 800 if you can. It is a more versatile machine and the added frequency are a benefit. You can find a link in the description.
With manual ground balancing I tend to get inconsistent values that sometimes range a lot just like you experienced at 7:23 and 6:54 in the same quiet locations. Which value should I use?
Try lowering the sensitivity down after locating a quiet spot then groud balance
Keeps getting deeper thanks. Sorry you got FBd also.
Lol ya they are pretty shallow
This is the first video I have watched of yours but I use my detector on the beach will all the same exact settings for at the beach normally I run mine at Iron by 6 and Recovery speed at 6 sensitivity about 20 Beach mode 2 but I still haven't found my first gold ring been at about 30 times and still haven't found too much quarters nickels dimes fine it's very frustrating spending three to four hours hunting and not coming up with the gold what do you suggest anything different
It just depends on the soil/sand conditions. If the gold isn't there you won't find it. Try different areas and be patient.
Off subject.When you tighten the bolt on the coil,does the ear stiffener keep the bolt from tightening enough to keep the coil from flopping?
No I haven't had an issue with it
Where do you get the coil steam protector? thanks
Outlawmetaldetectors.com
I just got a used 800. It's chirping like crazy in my back yard, I did a factory reset, noise cancel and ground balance with no luck. I live in a rural area, so not a lot of power lines or interference. Tried in several parts of my 1 acre yard. Cable is wound tight and screwed in tight. I've removed the coil cover and thoroughly cleaned it and the coil. I've tried changing channels and none make it quiet. The only thing that helps is to lower the sensitivity to 7 or 8 and then it's quiet, but I've just lost a lot of depth. I've put my phone on airplane mode with no luck. I also updated the firmware which was really old, but that didn't help either.
Thoughts?
James, try downgrading to 2.0 firmware and then do a factory preset. Join Sod Busters Metal Detecting Facebook group so it is easier to communicate we will see if we can figure this out.
Love your videos!! They’ve helped me a ton. Where are you at in Idaho? I’m in Mountain Home. I was shocked to hear you say you were from my state! 🙏🙌
I'm near Lewiston Idaho. Thanks for watching
Larry I got that orange coil tab support yesterday and it came with two zip ties. I haven't installed it yet, but I was wondering where the zip ties are used when putting the support on the coil?
They go over the support fron and back and around the coil. I personally don't even use the ties
Then I won't either. I think they would look awkward.
Any idea where I can find the RED piece attached to the your coil and shaft?
Ebay carry them. Search minelab equinox 800 coil tab strengthener
When I ground balance, should I set my coil on the ground? or leave 1 inch espace between my coil and the dirt?
Watch this video I explain the ground balance th-cam.com/video/Nb1gGWyFp_g/w-d-xo.html
Good day sir im came from the philipines i just want to ask about the deep of big item about 10 feet can reach detect of nox 800? Thank you sir
No it won't detect 10 feet deep
What would you use 4 or 5 hurtz for? Thanks
That would be for larger deep targets
Where did you get the red clip on your coil
The best place to get them is ebay
Will these settings work on the equinox 600? Also do you have to noise cancel? And I really like your channel.
Yes Shawn this works for the 600 also and I recommend noise cancel every so often to keep the detector running optimal. Thanks for watching.
I would love to chime in but I still have not received my 800 back from being repaired at minelab repair shop. Not impressed with their speed on repairs. Will take this into serious consideration with next purchase of new detector.
Just a comment about your suggested advanced settings. Having tried what you recommend about setting full on iron etc, I tried this and found one major problem, the Nox now finds much more, but most is just trash. If detecting in areas where there is an abundance of trash, I would not set my machine up as you suggest or you'll be doing a lot of useless digging!
This video is to show how to get maximum depth. At the end of the video i explain that these settings will not work in trashy areas. Thanks for watching
When you say "good solid signal" Do you mean sound + VDI no's? Anything on the screen that would be a likely junk tell. Thanks
I listen for solid tones. I don't go by vdi much
When the tone is in the advanced setting,will the machine save and all the modes sound the same?Park 1 Field 2 for instance?
No it would only be for the program that you are in
@@SodBustersMetalDetecting Thank you.You do a great job with well thought out and clearly delivered tutorials.
Thank you 😊
When you change coils do you have to reset your machine
No factory reset is needed
Will I pick up deep targets on the beach or surf water???
Yes
do you ground balance the same if in 3 feet of water?
Mike I'm a land hunter but I would guess that it would be the same.
Is there a way to have the tones to sound the same when one is in a different settings,Park 1 Field 2 etc.?
You can customize the tones to what you want in the advanced settings
th-cam.com/video/Rc0BHQGKzWs/w-d-xo.html
Texas just proved existence in America for over 20,000 years. Think Idaho could have have had been occupied for a lot longer than petro think. Im not trying to be disrespectful, you’re great and videos has helped me a great deal Sir. Just letting you know about the find in Texas about 40 miles north of Austin Tx. Ty
Thank-you!! Ive found some cool stuff past couple of years but i always felt i still wasn't hitting the real deep targets!! Cant wait too try your settings!! Best of hunting too you in 2021!!
Awesome, feel free to find me on Sod Busters Metal Detecting Facebook group also. Good luck hunting
Came across to this video and enjoyed the information. Just subscribed to your channel ;-)
Have you tested the influence of setting tones to 1 or 2 on the detecting depth? I always use 5 on my Nox 800, but heard that the higher the number of tones the more the detector's processor will be "loaded" and so there will be depth loss. The guy who made that comment said that 1 or 2 tones will give extra inches compared to, for instance, 50 tones.
I would have to test that. I always run 5 tones and have dug wheats down to 14 inches in good ground condition. I am interested in testing this though to see if there is validity to it. Thanks for sharing
You're welcome. Please let your viewers know what you find out.
@@burriedhistory will do
Use pinpoint mode to find clean ground works great
Yes it does
How are you my friend?, I realized you forgotten to tell people about the iron biased F2 settings you got it on but anyways thank you for the video and you have a wonderful day
Fe
No my friend I mean F2, but it's not the big deal anyways everyone has to use different settings according to their own territory, thank you for your videos and you have a wonderful and blessed day my friend and happy hunting.
Kindly,ground balance, you mentioned, 65&85 is same deeper go down ground or it has different higher amount of numbers go more down, please tell us...mr....🤔,also which store we can go for your product in New York City, because we live in NY,area....thanks sir 😀.
You can order from outlawmetaldetectors.com and it will be delivered to you.
I'm not sure I understand your question
When ground balancing you want the numbers low. You really don't need to ground balance unless you are in mineralized ground
Once I set my settings and when I press your profile will my settings stay there when I turn my machine off and back on
Yes you can save it to your profile.
@@SodBustersMetalDetecting thank you
if you can get a faint target to repeat, but no number shows up, would you dig it, or would you think it is a ghost signal?
If a signal is repeatable I would dig. Some targets are to deep to read a vdi# and could be the oldest coin you ever dug.
what is the difference between field 1 and field 2, or park 1 and park 2?
P1 is a lower frequency than p2 same with field 1 and field 2. Park 1 and to have the most discrimination to try and eliminate pull tabs and bottle caps and such
Where can I buy that coil reinforcer?
Ebay is the best place