Building Design (G+1) In STAAD Pro V8i Software
ฝัง
- เผยแพร่เมื่อ 20 ม.ค. 2019
- #staadpro, #Buildingdesign, # Civilengineering, #Civil#staadprotutorials,
In this Video lecture you are able to learn about Complete Building Design In STAAD Pro V8i Software.
-----------------------------------------------------------------------------------------------------------
In this channel you can learn about online civil engineering softwares. So Please subscribe my channel for more intresting videos.
-----------------------------------------------------------------------------------------------------------
To subscribe my channel click on Red Button and also press the Bell icon.
-----------------------------------------------------------------------------------------------------------
you are a man who doesnt waste a word. pure subject, no scrap... thank you man...
Great man, doing great job. Allah bless you.
Thank you very much 😍
Thankyou very much..this video helped me a lot
Thanx sir providing a detailed staadpro tutorial video...and a special thanx to you tube too for providing PLAYBACK speed of 0.75x...😂😂
i was with 1.5x
Thanku so much for quick and simple video which has covered almost all things. It was really easy to understand ☺
Thank you for your valuable comments
Thank u..this tutorial is of great help!
Thank you Shravan Sir, nice video very helpful
Thanks for the tutorial. finally, I got something in my brain about stad pro...thanks a lot.
Thank you 😊
yes really. i took one g+1 house contract. now just i watched this video and im now going to design that structure. pary everyone that structure should stand. btw this is easier than stock market...
very good. I love your presentations. simple but direct to the point.
Thank you 😊
Great video! It is really well-explained! Thank you.
Thank you 😊
Good explanation Bro,,,Now i got the Basics of staad pro,,great Job
Thank you so much for the complete instructions.
Thank you 👍🏻
Hi mam
You really doing great work
thank you for your service🙏
th-cam.com/video/YszDsIx2Tsc/w-d-xo.html
ACTUAL THANKS GOES TO YOU MY DEAR FOR THIS KINDNESS
Good job Brother , keep going 👍
Great video man..take a bow.keep uploading this type of videos
Hope u acheive great heights in your career
Thanks
Thank you, I will
I am very thankful to you for this.
Keep making more videos
Thanks 😊
Wao, that was brilliant as much as did not keep with the pace! A big challenge to me as an engineer! Subscribed!
Thanks a lot 👍🏻
i like it. i learned a lot.
Thanks a lot 😊 guruji...
Hi sir. Isnt right to consider eq load and wind load. Is it? I hope you could upload a video considering many loads. Thank you sir for this video, this is very helpful. I'm excited to learn more from you 😊
Very Fast And Descriptive... 👍
Thanks very much for this video liket it
Tqu , so much sir , it was so helpful ❤️
Thanks so much i have now what i needed
Thanks a lot... Good explanation..
Just wanna ask, i want to model the tie beam and i will use spring support., How can i get the value of spring constant?? If soil report is not available. Thank you in advance
Thanks man for clearing my doubts.
Super bro good information with knowledge thanks bro ❤
Thank you for the great work, only those who need can appreciate.
-In 14:13 can i just make the clear cover in IS456 instead of British standerd code?
Very very clear explanation .tq so much for this information .
I must say, you are awesome men.
Thanks dude. Dont mind some ingrate who doesn't appreciate you. 😁
Thank you very much brother 👍🏻👍🏻👍🏻
Informative video but frequent use of “ok” made this video sounds bad! 🙂 Nepal 🇳🇵
Shravan, This helped a lot. Thank you so much for such detailed information. Keep up the good work
Perfect JI. Thanks. Keep it up.
Go check out this video. Full tutorial coming soon with my ongoing projects from design stage to drawings. So subscribe and ping in my comment section th-cam.com/video/LjPPX5rBZ3w/w-d-xo.html
Sir thanks for the tutorial , pls do videos on
Assymitrical plans and also pls make videos on etabs, tekla structures and detailing of rcc elements
Definitely I will update your requirements in my upcoming videos
Thanks dude, I forget how to use staadpro you just revised how to do...
Thank you 😊
Your job is appreciable...but u said 'ok' thousand times.😔😔
Yes sorry for that after that video I was removed ok word from my dictionary 🤕🤕🤕
Don't repeat ok ,
LEAVE HIM ALONEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
Ok
OK😂🤣
it was unexpected...you have made video so concise & precise...thanks alot
Thanks for your valuable comments 👍🏻
@@civilengineeringbyshravan9596, keep up making more videos. Like to request you make a video on irregular shaped building like semi circular car porch etc.
I think as per my knowledge it is not possible to create semi circular car porch but definitely I will try for you
U ARE DOING GREAT JOB ... I APPRICIATE YOUR WORK
Thank you 😊
Thank you. Hope you create more videos
Brilliant yar!
Thank You
I think all the viewers will benefit a lot if we include designing of all things like, staircase,ground and roof water tank, columns,beams,slabs, foundation
etc and include report, all loads dead,live,wind,earthquake,combination loads etc. in one tutorial and show it on you tube
Thanks for your intelligent suggestion
Very good job .....keep it up!!
Very helpful video sir....plz provide load case details in depth
Thanks alot. very helpful
Go check out this video. Full tutorial coming soon with my ongoing projects from design stage to drawings. So subscribe and ping in my comment section th-cam.com/video/LjPPX5rBZ3w/w-d-xo.html
Bro also draw autocad floor plans and elevation in this channel it's help lot for learners from scratch
Simply perfect 👌👌
Thanks
being a little bit slower discussion will be much more effective for learners. by the way very helpful video.
Thank you for your valuable comments from my upcoming video I will try my level best
Thank u very much sir the video is so helpful.
👍🏻
Thnks boss. Its really a good n detail video.
Thank you 👍🏻
Nice job shravan
Good sir 👍 and thank you
Thanks brother 👍👍 very useful video
Ty
Brother ur explained are very awesome brother....
Thank you so much 😀
kekaaaa....superb bro keepit up...
Thank you
You uploaded a good vedio and i understand very well only the thing is u are going very fast...
Please go slow so that the concert should be clear.
This was so much useful.. thanks a ton
Thank you 😊
Bro one doubt.even i assign the size of beams and columns to very love thats doesnt showing any error.i tried by assuming 30mm but it doesn't shown any error but 30mm would be definitely failed one rgt.
Thankyou bro you are super knowladgeable person
Thank you 🙏🏻
Well explained
Excellent 👌
thank you, sir, it's really helpful, sir where are from?
Too good man! ! Make some more videos👍👍👍👍👍
Thank you 👍🏻
Thank you sir video was very helpful....
Can you one video for comparison between manual and staff design....
Definitely I will make it as soon as possible
good yar
Thank you...it was really very helpful👍
Thank you 😊
Thank you so much for the video sir
Most welcome
EXCELLENT.
Gagab sir !!!!!!!!
Only in19 min me
Well done.
Thank you
Sir distance between columns must be in center to center?
Thank you Shravan...
My only criticism is how you talk dude it's so fast. But the whole tutorial is impressive good job bro keep it up
thank you so much sir,
Thanks for the video..
Thank you 😊
Really appreciate your video
Thanks bro....u done a great job....
Can u please give design in ETABS bro....
Thank you ....
Very Gud it will use full sir
Thank you Sandesh plz share with u r friends 👍🏻
Thankue bro
thanks sir for a complete tutorial.
😊
Super bro👨🎓
soo good to see it ❤️🙏
Thank you
Super bro good job but make it slow it will better to understand slowly and clearly finally t qu so much for making this video
Thank you 👍🏻
I folowed all steps but in 15:23min i n my widows can not apear the design concrete and the 3 section that you have there showing steel (qty and so on). i can see only 4 bars of 12 for all beams and columns that i tryed to select
We can take node from Column centre line drawing dimension or else we need to take the dimensions from column to column distance only for node
1.While designing foundation u haven't considered SBC of soil any where Mr.sravan.
2.u have given entire slab as a single plate but the individual slab portions may be one way or two way in the results it only shown two way slab design.
3.in design beam command u need to select only beams and give assign to selected beams but u have selected assigned to view so columns also designed as beams is it correct?
Any ways nice video thanks for sharing ur knowledge Mr.sravan.
Thank you friend for your valuable questions
1. while designing foundation initially we need to select soil bearing capacity for the respected Dead load and live load case just i was taken it as 1.
2. While designing slab we either select single plate or multiple plate it will depending upon our assumption if we take multiple plates for example if we take multiple plates it will gives more number of output pages so for that reason i was considered as the single plate.
3. In designing beams we need to select parallel to X axis and Z axis and for the columns we need to select beams parallel to Y axis i was explained that process in Beam, Column and slab design by using Staad pro v8i softwre plz follow that video.
th-cam.com/video/jzNxmzsiUOA/w-d-xo.html
This is a very good video for learning staad pro. i have copied the steps as done by you, however, in concrete design tab it is not showing complete reinforcement details as is showing in your video. It is just showing cross section. any suggestion ?
Yes you have to select beams in design not all section
Thanks bro
Thank u it is very useful
Welcome 😊
Excellent job man!!
Thank you very much
Thank you bro
Hi sir
Really great gob you are doing.
But I facing some problems while starting foundation design.when start foundation design one pop up comes as attempted unsupported operations.please advise how to resolve this problem ASAP.
Ok .. helpful video .. ok
Why you design the slab with BS 8007? Please make a video which explain all the loads, where we can consider them, how we can calculate them. That will be helpful
Super and Clear explanation
Thank you 🙂
Nicely explained..thanks 😊
Thank you 😊
Nice one....but you think sesimic and wind loads are not necessary for this kind of small structure,right?
Awesome bro 👍
You should make a video of planning building by Auto cad...keep it up.. Helpful video
Thank you
Btw it was gud and helpful too
Very Nice...Good job
Thank you 😊
Very informative
Glad it was helpful!