Dear All, Kindly check out the below link for Structural Analysis and Design of RCC building using Staad.Pro software. In this course, all the basic concepts, and Lateral load Analysis(Response spectrum and wind load analysis) of a building as per IS-456, IS-875, IS-1893-2016, and detailing as per IS-13920 have been explained. www.udemy.com/course/staadpro-v8i-structural-analysis-design-of-a-rcc-building/?referralCode=C1CBC2B104EF72579338
I have created a course, structural design of buildings using Etabs software which includes structural analysis and design of a five-sorey RCC building(Real project) and is now available on udemy. Kindly use the below link to avail the full course. www.udemy.com/course/structural-design-of-buildings-using-etabs-software/?referralCode=14883FDBBD95A1ADAC02
Mam I am designing a building my column size is 300 x 450 mm for G+5 and basement parking ,It is for commercial and residential purpose.and the beam size is 300 x 450 mm . Is the beam and column size is okey mam . I am a final year student, is it ok.
Good Explanation....but I have one question madam....we draw center line plan and column have some offset from beam mid point and column will move from its original place as per drawing ...in that case what should we do??
Mam in this toturial center line not passing through center of column. So beams at coulmn edge. How we design or model that type of structure. ( Plz tell )
Noted. Please refer the below link for beam and column design th-cam.com/video/qQTCzaM9VF8/w-d-xo.html th-cam.com/video/kVcHiM7xwQ0/w-d-xo.html th-cam.com/video/bCfV5nkP2cc/w-d-xo.html th-cam.com/video/ipUS3ZyGGLE/w-d-xo.html
Dear All,
Kindly check out the below link for
Structural Analysis and Design of RCC building using Staad.Pro software.
In this course, all the basic concepts, and Lateral load Analysis(Response spectrum and wind load analysis) of a building as per IS-456, IS-875, IS-1893-2016, and detailing as per IS-13920 have been explained.
www.udemy.com/course/staadpro-v8i-structural-analysis-design-of-a-rcc-building/?referralCode=C1CBC2B104EF72579338
the way of teaching is so good, easy to understand .MAAM its worked 100% thanks
Glad to hear that!!
th-cam.com/video/Y_KRWwlvapA/w-d-xo.html
How you have moved the line daigram to O origin using move command can you explain
Excellent explanation keep it up #unikhomedesign
Thanks for helping me. Wanderfull vedio
Thanks and welcome
Thanks a lot for such an easy learning.........
You're welcome, I'm glad you found it easy to learn.
awesome
really concept clear design analysis but how did you design footing and find out SBC?
Really helpful video😊 Thank You Ma'am 🎊
Thankyou for all civil engineering related videos. Thankyou so much.
Good explanation
Thank you maam thank you so much for sharing this video with us ..
MAM, U R DOING AN AWESOME WORK, KEEP IT UP.....ALL THINGS R NICELY EXPLAINED....
It's my pleasure
Very useful. Thank you madam. Keep post more and more.
Sure 👍
Please give a complete staad pro session
Yes, it would be helpful!
Please refer the blow link
th-cam.com/video/d-BEbvuBToM/w-d-xo.html
It was helpful thanks
Nice
Nice explanation madam. Thank you
Good topic good video thank you mam..good luck
Thanks and welcome
IT WAS VERY HELPFUL, Thank You.
You're welcome!
Your presentation skill is very good. Keep it up.
Thank you, I will
I have created a course, structural design of buildings using Etabs software which includes structural analysis and design of a five-sorey RCC building(Real project) and is now available on udemy.
Kindly use the below link to avail the full course.
www.udemy.com/course/structural-design-of-buildings-using-etabs-software/?referralCode=14883FDBBD95A1ADAC02
Explained well
Good Video. Really struggling to convert the units and import to staad. You video helped a lot. Thank you
You are welcome!
Thanks a lot mam
I successfully imported it to the staad but the nodes didn't indicate to be x0 y0 z0 only the y0, is it still usable?
How you add 2nd or 3 storeys in AutoCAD or in Staadpro
Madam, I import the file in staad pro the centre line drwng is very small and not visible on screen any shrot cut key to zoom in on screen,,
It was helpful thank you but i thought you’ll design whole structure like column beam and foundation
🙏🙏
Is there any need to convert the unit from inches to meter ? we can just import the structure in with units in foot.
Since we are using Kn-m as unit in staad.pro, we have to maintain same unit in autocad as well while importing from auto cad to staad.
Mam I am designing a building my column size is 300 x 450 mm for G+5 and basement parking ,It is for commercial and residential purpose.and the beam size is 300 x 450 mm . Is the beam and column size is okey mam . I am a final year student, is it ok.
Thankyou it was so useful.
Moveing to origin was tough suggest UCSICON command to origin.
Glad to hear that
To move the line daigram to the 0 origin , what command you have used after using Move command?
move command only. In that you have to give x,y & z values as 0,0,0.
what is the reason for sharing violation while import cad drawing
Successfully imported But, Lines are Scattered. Why?
Redo once and then check.
Mam is the AutoCAD diagram is beam layout diagram
yes
It'll be great if u could explain it more simpler and detailed!
Please refer the blow link
th-cam.com/video/d-BEbvuBToM/w-d-xo.html
Will upload video for how to import autocad file to staad.pro software.
Woow its working
how can i arrange command like you??
Good Explanation....but I have one question madam....we draw center line plan and column have some offset from beam mid point and column will move from its original place as per drawing ...in that case what should we do??
Thank you.Yes it happens,but that is very minor.
@@CivilEngineeringMastery thank you
Thanks a lot..
Most welcome!
Mam in this toturial center line not passing through center of column.
So beams at coulmn edge. How we design or model that type of structure. ( Plz tell )
In framing plan,the center line is based on beams.We cannot place all beams on the center of column.
@@CivilEngineeringMastery thank u mam
So we design that column with bixial bending ? . .
Please refer the below link for column with different loadingth-cam.com/video/miPwo-Y1GGQ/w-d-xo.html
I don't know basic as well ppz try to tell basics of commands like copy and move.....how to do that??
Sharing violation occurred while accessing nu varuthu
NICE BRO
👍
How to view all videos on STAAD-PRO pro & RCDC
th-cam.com/play/PL_ZiPXJHDZzj4H8eZYDFZiEfBxmvIrNQU.html
th-cam.com/play/PL_ZiPXJHDZzhJ-wTKBnPYBrt7E7xo5sCx.html
Sir please make for how to calculate area of steel required for beam and column calculation how many bar are required for structure rcc
Noted.
Please refer the below link for beam and column design
th-cam.com/video/qQTCzaM9VF8/w-d-xo.html
th-cam.com/video/kVcHiM7xwQ0/w-d-xo.html
th-cam.com/video/bCfV5nkP2cc/w-d-xo.html
th-cam.com/video/ipUS3ZyGGLE/w-d-xo.html
mam pls share the cad file
Worst layout ever i have seen.. How can beam resist without the support of column.. Become a civil engineer first
Please refer the video properly.
ขอบคุณครับผม