Thanks for the insight into the inner workings of the mirror housing and the disassembly of the motor drive. I have the error code D90D0D and I assume a cable break. That's why the video is a good help. Thank you for sharing. Valentina & Patrik from Germany
@@waleedtheemba i had a problem w that module, i think water got it dead… I found one at a local junkyard and replaced it, after that the window switch worked again just fine
The casing for the motor has to be pried because it s glued together, this will allow the gears to be replaced. Other option is to replace the motor assembly alone
Hello,Your video on disassembling the side mirror was helpful to me. I did the repair myself. Thanks.
How did you open the metal part??
@@andreianualexandru3017 PUDISTE?
Awesome work and explaining the process, saved me $800 👏👏👏👏👏🙏🙏🙏
Thanks for the insight into the inner workings of the mirror housing and the disassembly of the motor drive.
I have the error code D90D0D and I assume a cable break.
That's why the video is a good help. Thank you for sharing. Valentina & Patrik from Germany
intente desarme el mio pero en la parte de desacoplar el modulo de metal con la esquinera no me deja
Do you have a link to buy that gear?
Hello, where is this gear purchased from
Do you need to remove the door trim?
Where can i get the gear kit?
Is this the same process for g30 5 series to remove lower housing trim replacement
how to put the top housing to the bottom piece if the spring is closed
My mirror sounds like it’s going to close but doesn’t is this what I need to replace for it to work?
I have the same issue, have you tried this ?
You will hear the motor but the mirror doesn't move, the gear is broken.
just had a car accident in my f20. left passenger side mirror completely broken.. my window module stopped working.. is it because of the side mirror?
Yes, there is a module behind the mirror cap. If that is faulty ur master window switch stops working
@@ranjaeduard3989 what should be done?
@@waleedtheemba i had a problem w that module, i think water got it dead… I found one at a local junkyard and replaced it, after that the window switch worked again just fine
I have the same peoblem is like you hear the motor but it make a noise i remove it the mirrorr but it was impossible to get to the motor i gaved up😢
The casing for the motor has to be pried because it s glued together, this will allow the gears to be replaced. Other option is to replace the motor assembly alone
Where u locate
I have the same problem. How can l get intouch with u
how did you remove the cap under the mirror ? and why you didnt record it ?
You spin it anticlockwise, or you can pry it from underneath the plastic using a long screw driver to access where it would be.
How did you mount the motor back on the bracket ? You need to put the spring back under tension. Same way with a screwdriver ?
I've figured it out; it just put it back and if you twist it with a little pressure is slides back in.
When you pryed open the motor casing ... it looked like they were glued together. Do you use glue to fix back the casing?
No glue....the mirror case is held together with clips that snap in place
@@user-phearle i mean the motor housing. tnx
why he didnt show what he done with tool