Good points! On the autolevel feature - do you find the level set a little conservatively low, or are the levels more ideal, as good as you would set manually? Thanks.
Your headphone setup is what I am curious about before I buy this. I was hoping to use the rear outputs for extra headphone monitoring. Can you elaborate on what you used for sending the signal from the rear 10 outputs to your headphone amplifier? (cable type and UC settings). I have an ART 6 channel headphone amp. Thanks and subscribed!
Same problem I had work fine till I installed mixer software I was on the phone for 3 hours with Sweetwater tech I sent my unit back tech support told me the unit must be defective waiting on replacement. Lol how do you bypass mixer software and thanks in advance.
@@MichaelArmstrong-n3l I just did another video showing the steps using pipeline I believe I show it. See if that one helps you. It’s under settings in UC.
I’ve been having trouble doing hardware inserts via pipeline. The only way I can get it to work is by bypassing the mixer software. Am I missing something?
Yes, that’s the only way it’ll work. Took me a half a day to figure out that one click. lol cause I didn’t see anything about that mentioned in the manual specific. I’m gonna do a video on it within the next couple weeks.
@@secondchancerising3025 wish we didn’t lose features by doing that. Would hate to return it but the features I lose makes me want to unfortunately. Losing monitor switching is kind of a drag. Also loop back routing.
@@MasterTheSound1 You can actually do monitor switching between two sets which I do. I actually removed my central station and save some rack space. Maybe I will do a video on that as well. It’s fairly easy to setup. I am not in the studio now but you tap the main encoder to switch between and set up monitor switching in UC and select your outputs.
@@secondchancerising3025 I will look again when I get home but the only way I could get it to work as by changing the actual outputs on the master fader of studio one thank you for your response though I know it’s a new interface and they always have their ups and downs, but hopefully they will take user consideration some other interfaces you can choose per output how the signal comes out they have like a through mode which is turning off the mixer, but not lose any functionality
Good points!
On the autolevel feature - do you find the level set a little conservatively low, or are the levels more ideal, as good as you would set manually? Thanks.
Your headphone setup is what I am curious about before I buy this. I was hoping to use the rear outputs for extra headphone monitoring. Can you elaborate on what you used for sending the signal from the rear 10 outputs to your headphone amplifier? (cable type and UC settings). I have an ART 6 channel headphone amp. Thanks and subscribed!
@@StrangeHare Stay tuned and thanks for the sub! I’ll have a video up in the next week or so.
Same problem I had work fine till I installed mixer software I was on the phone for 3 hours with Sweetwater tech I sent my unit back tech support told me the unit must be defective waiting on replacement. Lol how do you bypass mixer software and thanks in advance.
@@MichaelArmstrong-n3l I just did another video showing the steps using pipeline I believe I show it. See if that one helps you. It’s under settings in UC.
I’ve been having trouble doing hardware inserts via pipeline. The only way I can get it to work is by bypassing the mixer software. Am I missing something?
Yes, that’s the only way it’ll work. Took me a half a day to figure out that one click. lol cause I didn’t see anything about that mentioned in the manual specific. I’m gonna do a video on it within the next couple weeks.
@@secondchancerising3025 wish we didn’t lose features by doing that. Would hate to return it but the features I lose makes me want to unfortunately. Losing monitor switching is kind of a drag. Also loop back routing.
@@MasterTheSound1 You can actually do monitor switching between two sets which I do. I actually removed my central station and save some rack space. Maybe I will do a video on that as well. It’s fairly easy to setup. I am not in the studio now but you tap the main encoder to switch between and set up monitor switching in UC and select your outputs.
@@MasterTheSound1 You can do loop back routing as well but I haven’t done that yet. Stay tuned I wouldn’t return it yet it’s a pretty nice unit.
@@secondchancerising3025 I will look again when I get home but the only way I could get it to work as by changing the actual outputs on the master fader of studio one thank you for your response though I know it’s a new interface and they always have their ups and downs, but hopefully they will take user consideration some other interfaces you can choose per output how the signal comes out they have like a through mode which is turning off the mixer, but not lose any functionality