By the way you CAN tattoo moving the machine backwards. The issue we're trying to address is inconsistencies in tattooing sharp corners and changing the angle of the machine unnecessarily.
Thanks that was what I was gonna ask I seem to be moving it backwards"" laying the machine down slightly in the direction I'm taking the line. Is that OK it's just seems to be what I'm used to so far should I try to push the needle the other way.. ??
@AxelDaleTattoo it seems to be working its how I would hold the bar for hand done stuff thanks for the reassurance I've noticed when I'm comfortable and confident seems to go alot smoother
@@geebarney7910 Great. A lot of lining stuff also comes down to the needles and your throw / stroke as much as it is the technique. Great point about being relaxed. Most of the best work I've done is on autopilot not even thinking about what I'm doing because I'm so chilled with it.
That's one factor, yes. Another is that a round shader is flat so if you tattoo at too much of a slanted angle then you tend to get one side of the line more saturated than the other side. Also if your machine has give (suspension) then you tend to get more inconsistent results than a normal pointed liner in some areas of the body; because of the resistance, as you said. Hope that helps!
If it looks dotty or rough then It's likely in correct depth or angle. If it looks zig-zaggy then it's issue keeping the line consistent throughout. I would say get the machine really low like 5-6volts and try and keep the line same depth and angle and then speed it up once you start getting a feel for the results. Good luck!
Yeah and also the handle of the dagger because it's a continuous line. Going backwards isn't the problem, it's being inconsistent and changing the angle of the machine unnecessarily. You want to go forwards as much as possible to keep everything consistent but that doesn't mean you can't go backwards. Probably should have made it clearer in the video. One thing to note is that cartridges are designed to be used at an angle with the cartridge opening being at the top. If you're going backwards constantly your arm will end up in unnatural positions where the ink doesn't flow properly and the skin gets chewed up. Thanks for commenting!
9/10 it's incorrect throw, stroke or voltage setting. Try a short throw while pressing harder and going really slow on like 6 volts. Also make sure there's plenty of ink in the cartrdige. Report back after.
It really is practice and muscle memory on how to hold and grip your machine. Try a fatter grip so you aren’t squeezing as hard which can lead to shaky hands
Great observation. I think you mean in the cartridge when I'm using the round shader - It only had a couple of droplets in it. A full cartridge of ink with that needle can get a bit messy for video. Goes to show how you don't need much ink in the cartridge to pull a line! Thanks for the comment.
No definitely not as long as you have the proper technique. You'll only get a blurry look from incorrect application in my experience. Thanks so much for watching!
By the way you CAN tattoo moving the machine backwards. The issue we're trying to address is inconsistencies in tattooing sharp corners and changing the angle of the machine unnecessarily.
Thanks that was what I was gonna ask I seem to be moving it backwards"" laying the machine down slightly in the direction I'm taking the line. Is that OK it's just seems to be what I'm used to so far should I try to push the needle the other way.. ??
@geebarney7910 Are your lines coming out clean first try? If it's not broken don't fix it that's what I say.
@AxelDaleTattoo it seems to be working its how I would hold the bar for hand done stuff thanks for the reassurance I've noticed when I'm comfortable and confident seems to go alot smoother
@@geebarney7910 Great. A lot of lining stuff also comes down to the needles and your throw / stroke as much as it is the technique. Great point about being relaxed. Most of the best work I've done is on autopilot not even thinking about what I'm doing because I'm so chilled with it.
super thorough my guy thank you so much
You're welcome! I tried to pack it full of as many mini-tips as I could.
Superb tips!
Thanks a lot!
Great tips thx
It's got to be the Brother Pocket Jet. Majority of Tattoo studios are using this printer. 👌
Great work keep it up boss.
Appreciate it, will do!
Round Shader using for Lining?
Yes I used a round shader in the second half of the video. They can work quite well for lining if you know what you're doing :)
@@AxelDaleTattoo RS must be work slow hand movements? And less trauma for the skin, and crisps line,
Harder to get consistent depth? Is that because it needs an element of pressure? As the skin will push against it more.
That's one factor, yes. Another is that a round shader is flat so if you tattoo at too much of a slanted angle then you tend to get one side of the line more saturated than the other side. Also if your machine has give (suspension) then you tend to get more inconsistent results than a normal pointed liner in some areas of the body; because of the resistance, as you said. Hope that helps!
@AxelDaleTattoo cheers pal and great video 👍
You don’t get that blurry look once healed after using round shaders for lining?
I was using 3rl for lining and i noticed after making the line, the line has this, corrugated looks? What could be the problem?
If it looks dotty or rough then It's likely in correct depth or angle. If it looks zig-zaggy then it's issue keeping the line consistent throughout. I would say get the machine really low like 5-6volts and try and keep the line same depth and angle and then speed it up once you start getting a feel for the results. Good luck!
Wait did you tattoo that tear drop with a forward and a backwards stroke 👀
Yeah and also the handle of the dagger because it's a continuous line. Going backwards isn't the problem, it's being inconsistent and changing the angle of the machine unnecessarily. You want to go forwards as much as possible to keep everything consistent but that doesn't mean you can't go backwards. Probably should have made it clearer in the video.
One thing to note is that cartridges are designed to be used at an angle with the cartridge opening being at the top. If you're going backwards constantly your arm will end up in unnatural positions where the ink doesn't flow properly and the skin gets chewed up.
Thanks for commenting!
every time he says guys drink a shot
Guys 🍻
I’ve BEEN doing that.
Any tips on shaky lines? I can't find anything helpful. Usually, people say, "Just practice more," but I feel like I'm still doing something wrong.
9/10 it's incorrect throw, stroke or voltage setting. Try a short throw while pressing harder and going really slow on like 6 volts. Also make sure there's plenty of ink in the cartrdige. Report back after.
@AxelDaleTattoo I do exactly that, but slower lines are even shakier. I'm trying to relax my grip on the pen, it seems to work a little bit.
@@SeiergaRugendorf Record yourself and send it to my instagram @axeldaletattoo
It really is practice and muscle memory on how to hold and grip your machine. Try a fatter grip so you aren’t squeezing as hard which can lead to shaky hands
Hold your breath
Ive always been told to push my lines away from me and not pull towards me?
It doesn't matter you can push or pull. The main thing is to keep the motion consistent for the tattoo otherwise you'll get different line weights.
you know what is strange ? it looks like there is no ink in the mag. there is ink when tattooing on real skin but not on the fake skin.
Great observation. I think you mean in the cartridge when I'm using the round shader - It only had a couple of droplets in it. A full cartridge of ink with that needle can get a bit messy for video. Goes to show how you don't need much ink in the cartridge to pull a line! Thanks for the comment.
Guys
You don’t get that blurry look once healed after using round shaders for lining?
No definitely not as long as you have the proper technique. You'll only get a blurry look from incorrect application in my experience. Thanks so much for watching!