Great video especially on SignMasters vectorization feature is like you said… it’s money. Appears SignMaster has provided the professional sign and graphic business more options in cutting vinyls. More colors provides a vinyl cutting business taking up a few levels increasing cost. Thanks!!
Yes sir.. glad I found your site and it was so awesome dude Ive learned more especially not only how to started and doing work it was more than on how u dealing and taking care ur costumer it was great getting ideas n knowledge.. thank you for ur help n more blessings to u and everyone....
I just upgrade to Pro! And I love Thai tutorial helped me a lot!! Thank you! Would you show us how to do Car Magnets with vinyl and sublimation!!! Will be a great class for us! Thank you!
Thanks for the kind words! As of right now, we're not aware of any car magnet material that can be sublimated. Typically these products are printed using an eco-solvent printer, which we don't carry. If a sublimation car magnet does become available, we would love to make a video on that!
This awesome tutorial . I have couple of questions 1) can up load and and do you have a site to get different lettering fonts ? 2) can we upload custom lettering fonts And if so how do we do it ? 3) can up load actual photos and do we and if so do we have to turn them into a vector file as well …? 4) you guys don’t have actual classes at your Fullerton location on your products ? Thank you
and is sign master a good software to start on? there are so many i have no idea which one to choose. I have coreldraw trial, illustrator, vinylmaster, easycut
So…if eye have a “distressed” font… how can eye fill certain holes or spots so cutter doesn’t have to cut all of them.. eye use the arrange feature to remove “bits & pieces” for less cutting.. just want to remove them OR to fill them…
I'm not get to cut by color what's d problem now started using it idk if there is a special way I design in AI and cut with sign master... help plz!!!!!
Please I am new in the business. my printable vinlys contour cutting always does not cut well. Please kindly show me detail about how to set calibration marks for accurate cutting thank you
There should be a calibration test you can run that will help you make the proper adjustments on your cutter. This will vary depending on what brand and model vinyl cutter you have. If you purchased your vinyl cutter from another retailer, we recommend you reach out to them or the manufacturer directly for technical support. If you purchased your vinyl cutter from HeatPressNation, please reach out to our MyExpert Support Team at support.heatpressnation.com or (800)215-0894. We are available Monday - Friday, from 7:30am-4:00pm PT and will be happy to assist you.
Hello, question: after I vectorized a color image I have a transparent hair line between all the colors of the object. It seems to happen with all my projects and if printed it shows as a white separation. How to fix please?
That’s very smart whoever did this app or program from Oliviana station it’s easier it’s faster which is give you more option to do it onetothree I like this program very good idea thank you
it would be great if it showed the word that you type as you hover over the fonts instead of showing the alphabet Just a suggestion move your logo over to the far fight corner so you don't cover any of the important parts of the tutorial
SignMaster Pro won't send jobs directly to your GCC machines. However, you are able to export your graphics as a PDF and then import them into GreatCut. So you can still use it as a design program.
This tutorial is for the SignMaster Pro software. This software is included with all of our VinylSystems cutters, which can be found here: heat.press/vinylsystems
![[LIVE] : ONE ลุมพินี 78 | คู่เอก "ปกรณ์ vs ฟาบิโอ"](http://i.ytimg.com/vi/LSOmgl0Th2c/mqdefault.jpg)
OMG thank you, thank you.
Please do more video on the sigmaster pro.
Thanks ❤️
I needed this. Thanks
Great video especially on SignMasters vectorization feature is like you said… it’s money. Appears SignMaster has provided the professional sign and graphic business more options in cutting vinyls. More colors provides a vinyl cutting business taking up a few levels increasing cost.
Thanks!!
Thanks a lot!
Thank you very much you helped me figure things out.
Dude, you guys are legends, really hope to see more tips and tricks or design tutorials with sign master. Thanks so much!
Thanks for the kind words! You can view all of our SignMaster demo's here: th-cam.com/play/PLY9aNS49KtIwKvimO9-iTvizrXUWhGgIU.html
The font is Benguiat.
Yes sir.. glad I found your site and it was so awesome dude Ive learned more especially not only how to started and doing work it was more than on how u dealing and taking care ur costumer it was great getting ideas n knowledge.. thank you for ur help n more blessings to u and everyone....
I just upgrade to Pro! And I love Thai tutorial helped me a lot!! Thank you! Would you show us how to do Car Magnets with vinyl and sublimation!!! Will be a great class for us! Thank you!
Thanks for the kind words! As of right now, we're not aware of any car magnet material that can be sublimated. Typically these products are printed using an eco-solvent printer, which we don't carry. If a sublimation car magnet does become available, we would love to make a video on that!
Good sar
can you do two cut lines to create easy peel stickers?
Thank you!
Please, how cut stickers with Mc630 using SignMaster? Thanks
This awesome tutorial . I have couple of questions
1) can up load and and do you have a site to get different lettering fonts ?
2) can we upload custom lettering fonts
And if so how do we do it ?
3) can up load actual photos and do we and if so do we have to turn them into a vector file as well …?
4) you guys don’t have actual classes at your Fullerton location on your products ?
Thank you
and is sign master a good software to start on? there are so many i have no idea which one to choose. I have coreldraw trial, illustrator, vinylmaster, easycut
So…if eye have a “distressed” font… how can eye fill certain holes or spots so cutter doesn’t have to cut all of them.. eye use the arrange feature to remove “bits & pieces” for less cutting.. just want to remove them OR to fill them…
Quick question, I have the pro 5.0 I'm having trouble with the arch text. It let's me do the top but not the bottom. Please help
Do you have a tutorial on how to run jobs on multiple cutters simultaneously?
We currently do not, but great idea!
I'm not get to cut by color what's d problem now started using it idk if there is a special way I design in AI and cut with sign master... help plz!!!!!
Hi there! Are you creating the vector from scratch? Also, is it being saved as a layered SVG?
Do you have a tutorial on adding a image on the inside of fonts for sign master pro?
So sorry, we don't yet have a video for that process in SignMaster Pro.
Please I am new in the business. my printable vinlys contour cutting always does not cut well. Please kindly show me detail about how to set calibration marks for accurate cutting thank you
There should be a calibration test you can run that will help you make the proper adjustments on your cutter. This will vary depending on what brand and model vinyl cutter you have. If you purchased your vinyl cutter from another retailer, we recommend you reach out to them or the manufacturer directly for technical support.
If you purchased your vinyl cutter from HeatPressNation, please reach out to our MyExpert Support Team at support.heatpressnation.com or (800)215-0894. We are available Monday - Friday, from 7:30am-4:00pm PT and will be happy to assist you.
Hello, question: after I vectorized a color image I have a transparent hair line between all the colors of the object. It seems to happen with all my projects and if printed it shows as a white separation. How to fix please?
Hi Bryan! Please contact our technical support team over at 800-215-0894 for further assistance.
Can you do mock-ups with sign master pro?
You can do basic flat mock-ups. But for photorealistic mockups, you'll want to use a program like Photoshop.
@@HeatPressNation how do you do the flat mock-ups? Is it something I can transfer over to Etsy?
That’s very smart whoever did this app or program from Oliviana station it’s easier it’s faster which is give you more option to do it onetothree I like this program very good idea thank you
Is vectorization only on the pro version? If not, where do I find it? I have signmaster cut 3.5.
I found it.
@@kialei2483 how????
it would be great if it showed the word that you type as you hover over the fonts instead of showing the alphabet
Just a suggestion move your logo over to the far fight corner so you don't cover any of the important parts of the tutorial
hi, does the signmaster pro work with gcc expert ii 24 lx?
SignMaster Pro won't send jobs directly to your GCC machines. However, you are able to export your graphics as a PDF and then import them into GreatCut. So you can still use it as a design program.
Our other local shop charges $250 to vector.
Oh wow! That's definitely among the higher quotes we've heard so far.
Please sir Hindi me video dalo please
This a cuter?
This tutorial is for the SignMaster Pro software. This software is included with all of our VinylSystems cutters, which can be found here: heat.press/vinylsystems
Great video like always! 🫥 question where is the eraser tool may be I miss it.
There is no eraser tool in SignMaster Pro. If you need to remove a particular section of a shape, you can draw another shape over it and punch it out.
@@HeatPressNation nice thank you!
How would you flatten diferent color vectors to make stickers with countour or borders