Of all the video posts I have watched, I have never left a comment. This video post deserves a thumbs up! Well explained without bumbling around; covers all aspects of the problem and is professionally done. ( I say this as a former broadcaster) and now owner of a 2013 Santa Fe. Thank you.
Thanks Les - thanks for the comment really means a lot. As you probably know, lots of work goes into producing a complete video and it’s nice to get some appreciation for that fact. Thanks again.
Absolute legend! Just stripped mine down and guess what? The solder has cracked, re soldered car back together and now working. £230 saving nice one mate 👍🏻
For anyone who may be interested... I replaced all the resistors and put 4.7ohm 1w 1% It works properly. The resistances are large, so you have to make room carefully. In total it took me 5 hours including reassembling the bumper... including beer break, sandwich and shower.
Excellent video! I have a Hyundai Tucson 2016 with the led eyebrow head lamp not working, do you know if the process will be similar to this to fix it?
Thanks very much.well talked threw.i took the 4 voltage resistors out,cleaned spirts of salts and re soldered the 4.reconnected and it worked.😊i did not think i would be smart enough to do it,but i did thanks indeed to you.kind regards john.
My daughter's 2013 Sante Fe sport has fog lights in the bumper. Her DRL are above the headlight. Anyhow, she gently rear ended someone and the only thing broken was the passenger fog light. This video was exactly what I needed to replace it. Yes, the window washer tank was in the way but also some thin steel so I feel I would've had to partially pull bumper out anyways as you instructed. Great video.
Excellent video. Nearside DRL stopped working on my 2013 Santa Fe - where abouts are the 4 screws to access from the wheel arch area without having to remove the front bumper? Started having a look, but maybe not in the right place.... Any pointers (or even images) much appreciated
great video watched once and was able to easily sort mine. I found another video where i ound out what resistors to use as a replacement and it was 4.7 Ohm 1Watt. saving of £250 minus the cost of a mico solder set from amazon
Ideal. Just followed this at the weekend and done the job perfectly. Although if the near side goes next I’ll def get a heat gun as the wife’s hair dryer didn’t quite cut it 😂
I don't suppose you know the resistance value of the resistors so I can get new ones. The colour bandings are not clear enough to determine the value. Thanks and great video. EDIT. All sorted. I fitted 4 new 4.7 ohm 1 watt resistors.
Hi mate Please can you tell me if you replaced the resistors. And if you did where did you get them and which ones did you buy. Thanks very much for your help
Hey man, they turn on automatically when engine is running but light switch is off (on 0)... Most lilkely both of your leds are dead. I got only one working on mine... :P
G’day mate I’ve got a 2014 Santa Fe and my DRL lights are fake and I see that I can buy aftermarket do they just plug-in and work or does it need to be wired thanks mate
H mate informative vid. Thankyou. Have you taken the A pillar trim off your car. I have taken it off but it only comes I out so far. It's still connected with 2 tabs
Hi , nice work and saved a few £ ss Wait till you try the number plate light bulbs , you end up taking the tail gate cover off in side as the screws have rusted in the clips , 4 hrs later and 2 bulbs for £7 . Must say MY 2009 and the 2012 have been great cars , but the 2009 had the slave cylinder go for the clutch at 110,000 miles engine gear boxes out £££ , but still on the original disc and pads and only on the second set of tyres . The 2012 needed a new clutch on delivery at only 182 miles a factory fault . Thanks for your video .
Thanks for taking the time to record this fix. My left side light stopped today and I have no idea how to access it. Your video is well done and exactly what I was looking for. Thanks.
I've just replaced mine. I used four 4.7ohms resistors. I used ones with legs on that were physically the same size. I bent the legs so the resistors were sitting 5mm off the board. This means that they can cool better so they won't get too hot and fall off again.
Could do to mention the wattage rating of the replacement resistors. The reason for initial failure is that the resistor wattage rating is too low. A minimum of quarter watt required. I actually used half watt but they did take up more space and it was a tight fit.
Can anyone tell me how to turn these lights on? I've owned the 2013 model for over 18 months and can't for the life of me work it out!! Not sure whether I'm not doing it correctly or whether they need replacing. Thanks!!
Hey Jessica, not sure if you figured it out already but you just flip that toggle on the light switch to turn it on and off. I thought that it should stay in one position once flipped but it doesn't.
Great video! BUT, @HYUNDAI, terrible design, no one should have to disassemble a vehicle to replace a front light, your designers are fools, do better!
This is the way How To videos should be made. No mucking around, and clear, simple instructions and tips. 10/10 Cheers
Of all the video posts I have watched, I have never left a comment. This video post deserves a thumbs up! Well explained without bumbling around; covers all aspects of the problem and is professionally done. ( I say this as a former broadcaster) and now owner of a 2013 Santa Fe. Thank you.
Thanks Les - thanks for the comment really means a lot. As you probably know, lots of work goes into producing a complete video and it’s nice to get some appreciation for that fact. Thanks again.
This is the best how to video I’ve ever seen !!
Absolute legend! Just stripped mine down and guess what? The solder has cracked, re soldered car back together and now working. £230 saving nice one mate 👍🏻
For anyone who may be interested... I replaced all the resistors and put 4.7ohm 1w 1%
It works properly.
The resistances are large, so you have to make room carefully.
In total it took me 5 hours including reassembling the bumper... including beer break, sandwich and shower.
How long was your beer and sandwich break? I'll need to add that into my time frame for the wife. 1 or 2 hours?
Excellent video! I have a Hyundai Tucson 2016 with the led eyebrow head lamp not working, do you know if the process will be similar to this to fix it?
Thanks very much.well talked threw.i took the 4 voltage resistors out,cleaned spirts of salts and re soldered the 4.reconnected and it worked.😊i did not think i would be smart enough to do it,but i did thanks indeed to you.kind regards john.
My daughter's 2013 Sante Fe sport has fog lights in the bumper. Her DRL are above the headlight. Anyhow, she gently rear ended someone and the only thing broken was the passenger fog light. This video was exactly what I needed to replace it. Yes, the window washer tank was in the way but also some thin steel so I feel I would've had to partially pull bumper out anyways as you instructed. Great video.
thanks for the video .... 5 minutes ago a finished the work on my led light on santa fe 2014
Great stuff - glad it helped and hope it saved you a few $
Excellent video. Nearside DRL stopped working on my 2013 Santa Fe - where abouts are the 4 screws to access from the wheel arch area without having to remove the front bumper? Started having a look, but maybe not in the right place.... Any pointers (or even images) much appreciated
great video watched once and was able to easily sort mine. I found another video where i ound out what resistors to use as a replacement and it was 4.7 Ohm 1Watt. saving of £250 minus the cost of a mico solder set from amazon
Ciao, puo dire quale è il video, siccome mi interessa per il mio Santa Fe. Grazie
Congratulations, you are my hero! Amazing work!
Ideal. Just followed this at the weekend and done the job perfectly. Although if the near side goes next I’ll def get a heat gun as the wife’s hair dryer didn’t quite cut it 😂
Haha often used the wife’s hairdryer over the years for all sorts of jobs.
I don't suppose you know the resistance value of the resistors so I can get new ones. The colour bandings are not clear enough to determine the value. Thanks and great video. EDIT. All sorted. I fitted 4 new 4.7 ohm 1 watt resistors.
Sorry I don’t, thanks
Hi l have stripped my lamp and it looks like the resistors need replacing, can you let me know where l can get hold of these please regards Tom
I need a video for removal and replacement of the daytime running light on drivers side for a 2019 Santa fe
Hi mate Please can you tell me if you replaced the resistors. And if you did where did you get them and which ones did you buy.
Thanks very much for your help
No I didn’t replace the resistors - but if I was too I would get then from eBay or RS Components at a push.
@@noseknows thanks buddy
Hi, any idea if all of the solders are in tact? 🙏
Thank You. i have been able to fix my santa fe. Keren sekali
Thank you for video. I fix my light.
I have a Hyundai Santa Fe and I have never been able to turn on that Antinibla LED strip, only the bulbs inside.
Hey man, they turn on automatically when engine is running but light switch is off (on 0)... Most lilkely both of your leds are dead. I got only one working on mine... :P
Does anyone know if you get blanks for the fog lights, so you can remove them and then clip these blanks in and leave it in there?
G’day mate I’ve got a 2014 Santa Fe and my DRL lights are fake and I see that I can buy aftermarket do they just plug-in and work or does it need to be wired thanks mate
Hey Marco - Sorry not sure, they work on a permanent live feed on the cars that have them equipped as standard.
Hey may I ask what I can use to text to make sure it works after I have fixed my daytime light please?
where can you buy resistors?
Thanks @noseknows for a very clear video and process. And very timely as my right-side DRL just went on the fritz this week.
Great - Hope it helps
Another question would be: do you happen to know/give some examples of some types of sealant to replace the old one to make it waterproof again?
Sorry I’m not sure on the sealant as I used the stuff that was already on.
@@noseknows thanks for the answer. I saw in the video, thought you might have some idea though :P
@@avp8430 it is butyl sealant.
@@catbert007 I already found and replaced the old one. all is great now 1 yr later. thx.
@@avp8430 yeah a little late, but I am glad to hear that. I happened to find this treasure just recently. 😂
H mate informative vid. Thankyou. Have you taken the A pillar trim off your car. I have taken it off but it only comes I out so far. It's still connected with 2 tabs
Hey - no sorry I haven’t
Hello, what is the value of the registors you have replaced
Registors ? Do you mean resistors ?
@@noseknows yes i dont know the value
@@georgesebastian9486 he said "around 4.7 ohm and not sure bout the WATTAGE" @12:20 .
@@avp8430 4.7ohm 1Watt is what i used and works perfectly
Very helpful
Hi , nice work and saved a few £ ss Wait till you try the number plate light bulbs , you end up taking the tail gate cover off in side as the screws have rusted in the clips , 4 hrs later and 2 bulbs for £7 . Must say MY 2009 and the 2012 have been great cars , but the 2009 had the slave cylinder go for the clutch at 110,000 miles engine gear boxes out £££ , but still on the original disc and pads and only on the second set of tyres . The 2012 needed a new clutch on delivery at only 182 miles a factory fault . Thanks for your video .
Great video I need to do this to my car as well
Thanks James - They are expensive to buy I’ve had two DRL go down.
Thanks for taking the time to record this fix. My left side light stopped today and I have no idea how to access it. Your video is well done and exactly what I was looking for. Thanks.
Thanks Jonathon
I don’t have a heat gun so I have looked on TH-cam about the glue and going to try it in the oven at around 90 degrees for about 10-12 mins
I fixed my DRL thanks a bunch mate was a fun little task
Can someone tell me from which command I turn on these Led lights on my 2013 Santa fe.... the same one that just changed in the video 😭 please
what no OEM Part no of LED .my DRL not working
Great job thanks mate
Great glad it helped
Amazing work , can you provide the details of the resistance that you weld ? you buy know one? model? thanks!!
I've just replaced mine. I used four 4.7ohms resistors. I used ones with legs on that were physically the same size. I bent the legs so the resistors were sitting 5mm off the board. This means that they can cool better so they won't get too hot and fall off again.
Could do to mention the wattage rating of the replacement resistors. The reason for initial failure is that the resistor wattage rating is too low. A minimum of quarter watt required. I actually used half watt but they did take up more space and it was a tight fit.
Can you help me to fixed my light
How to clean out a drainage port in the body
And how do you turn on those lights? that I have turned the handle in all the positions and those lights do not turn on please
The lights come in when the ignition is turned in there is no switch for the Day time running lights on the Hyundai Santa Fe
Wit size of resistors did you use.
اني ما اعرف اكتب انكليزي بس لازم اعلق الك حتى لو بالعربي عاشت ايدك
Can anyone tell me how to turn these lights on? I've owned the 2013 model for over 18 months and can't for the life of me work it out!! Not sure whether I'm not doing it correctly or whether they need replacing. Thanks!!
Hey Jessica - They come on automatically when you start the car.
Hey Jessica, not sure if you figured it out already but you just flip that toggle on the light switch to turn it on and off. I thought that it should stay in one position once flipped but it doesn't.
@@alphonzodarty7021 unfortunately nothing happens so I assume they're not working. I'll get the mechanic to have a look at the next service. Thanks!
Great video! BUT, @HYUNDAI, terrible design, no one should have to disassemble a vehicle to replace a front light, your designers are fools, do better!
Yep I agree typical modern day car design.
Way too much work to make a light work!
Well he did say £200 for a new one , two hrs in garage at home , your earning £ 100 an hour , are you an MP in the house . ?