I super size my push-lawnmower

[@Amy-wh3dt]

Sometimes you just need MOWER power

[@thegenerousdegenerate9395]

Groannn... Lol

[@Amy-wh3dt]

4Bt Cummins

[@MrDavidelliottjr]

Yup

[@scootergeorge9576]

@@thegenerousdegenerate9395 - MOWn!

[@leecanty2894]

Corny but you still get a 😂

[@gearhead1234]

When That chain breaks you could lose a body part....

[@adamoldham9542]

Remove the front expose the blade to make it more dangerous and effective

[@boataxe4605]

Tim ‘The tool man’ Taylor would be proud.

[@Ron-im6mj]

Omg that's the first thing I thought of when I seen it...lol The tool man built it...lol

[@thegenerousdegenerate9395]

Needs a Binford label.

[@brianeastman3547]

Or Mythbusters.

[@Flippen87]

ARRRUUUHH!

[@rverro8478]

He probably add nitrous to it.

[@hellohun7331]

If I were you, I'd move closer to the city. The hospital would be closer.

[@FormerMcCrankin]

Hööh... 🙄

[@pereklund7112]

Eating ice cream and opening a door at the same time might be a tad to much for some people🤣🤣🤣

[@timwilkinson2797]

Sad - this is the upncoing ppl that " Can " control us !!!!!

[@awolslaboratory1388]

Congratulations. You successfully made the most dangerous lawnmower possible. I like it. Kudos!

[@lawnmowerdude]

No he didn’t cut holes in the deck.

[@apa530]

Yep I would be afraid that chain could come flying loose and take half my skull with it, or go right through my chest ,or dislocate one of my arms or legs !

[@b166err]

"add fuel stabilizer or voids warranty" 5:55 👍

[@RichardGottshall]

You rookie ,, Turn your blade over, your trying to cut with the flat side. Though it is so sweet. lol

[@willefixit]

should cut better u rite.crazy build!!any way ,

[@OliverMotorized]

thanks for the suggestion. So the blade only goes on one way, I'm thinking either the blade is shot, or the Briggs engine turns opposite of the original engine.

[@RichardGottshall]

@@OliverMotorized , I would say motor is running backwards.If blade only bolts on one way the the spin would be right for the deck. is there a way to change the pull on the jack

[@keithwittman4741]

I'm seeing the tomato only getting slapped around by the blade,that's why it hung in there so long. That's also why what I had to drop my first thoughts of it going backwards, or being upside down. Upside down or backwards rotation would have cut te tomatoe quickly.

[@keithwittman4741]

Filling in the hole where the wheel drive might help with the airflow of the deck.

[@jmaclaren4147]

The blade is spinning in the wrong direction.

[@dontworrywhatmynameis4111]

TH-cam finally gave me a good recommendation for once lol..Definitely a cool build,and definitely gonna sub and check out more of your content

[@x47g22]

As long as the grass doesn't stand after you ran through it, it's a success! I love the feeling when everything just works! It's fun watching you brother! More projects.

[@thegenerousdegenerate9395]

Yup, she's definitely a blonde... Too cute. Doors are hard sometimes. LOL!

[@mtcruse]

Some advice:
1) Cut the front lip of the deck off as well as the baffle - then your blade has a better chance of contacting the taller weeds (watch yer feet!)
2) A chain tensioner and a chain guard would be a really REALLY good idea, unless you'd like a #50 chain imprint on your melon.
With that aside, this is very cool...

[@vancemacd6315]

I really wish I could stop by in person to admire your works of genius, you do great work! Please keep it up.

[@beaud3035]

Hell yeah!! Awesome bro! Great music choice in the five minute mark 👍

[@charlescheese7997]

The simplistic way you go about these Little Creations is great they all seem to work out and in some sort of fashion I enjoy watching them keep them coming

[@honeyman71962]

Are you absolutely certain that the blade was turning in the right direction in order to cut the grass looking at it from the bottom it looked to me like the blade was not turning in the proper direction and if that's the case it would be just knocking the grass down flat instead of cutting it that is something you might want to check into.

[@OliverMotorized]

The blade is on right but maybe the engine turns opposite the original

[@ketilholmlange9130]

Nice video. I can see that you have put some work in the editing and that really works. Good job👍

[@pinkysgarage2779]

Awesome build man and no such thing as too extreme lol

[@aliciaantoniadis9100]

Thank you so much! I have always dreamed about a mower that would go through close to everything but actual trees! Now, the music was really good, and it was very nice of you to let your lady in as a guest. And I agree with her, it does look scary.
Thank you Oliver.
Regards Alicia.

[@pauljohansson7697]

I just subscribed to your channel and hello from New Hampshire.

[@tyee4u]

My fave part is always the fires 🔥😂

[@cannonballrepair7940]

That is crazy! I like it!👍🏻👍🏻

[@skydive7054]

the most badass pushmower ive ever seen or heard in my entire life.

[@704406bbl]

Looks like something Ed Roth would've built. Way cool.

[@scootergeorge9576]

EJ Potter would have put either a V8 or a jet engine on it!

[@decadantdog4444]

Big Daddy Rat!

[@duncan6306]

Your edits are getting better and better man! I love it!!!

[@codelicious6590]

Dude I was laughing my and off when you started pushing it around. Hilarious.

[@connorwaits6575]

The tomato bit was funny, almost like it was caught in a vacuum of sorts

[@texasdoug5739]

Very clever....well done! You are talented!

[@OliverMotorized]

cheers doug

[@yvesf5355]

Oliver Man I love your Video's and Also like the Music ,keep it up .....

[@shplayshiggty7537]

When you get baked and edit lol look how long this piece gets stuck great vid man

[@OliverMotorized]

hahah nahhh just thought it was cool!

[@nedlyest]

I learned the hard way to at a minimum use pliers to hold metal on a drill press. I had the tip of my finger lopped off down to the bone. I got lucky I didn't lose anything but meat.

[@rustyshackleford7470]

Nate Sargeant I didn't want to thumbs up you getting your finger chopped off. Seemed weird.

[@RockerGuy0001]

If you put a stop on the press it will prevent it from swinging

[@ryryboyle6126]

Thanks later I'll take the stop sign from my corner of the street when my neighbors are sleeping hope I don't cause a wreck but I can't keep hurting my fingers

[@colstace2560]

Use a vice, lucky you didn't lose a finger dumbass

[@jaketurner7863]

Need to rotate the angle drive 180 and use the other shaft to correct blade rotation.

[@tweetydoall1755]

Mount that engine to a zero turn and put 4 wheeler tires on it. That shit would be boss

[@DjaniGames123]

Very fun to watch video!

[@1coppertop]

Hilarious. Great video. I laughed often. including pull the door not push. Lol

[@ayoub3342]

Love it keep them vids coming ❤🙏

[@Dan_Kornfeld]

If Mad Max needed a mower for his lawn, it would look exactly like that! (Although, his might have a ram air intake and maybe nitrous - maybe next time!) Cool upload. Keep doing what you do dude!

[@OliverMotorized]

lol spit some gas into the air intake

[@meacenastiberius9438]

And you still have all your fingers? Freakin Awesome !

[@neelonghunglow]

I've been waiting for more Fire since the bicycle video! I'm sitting next to a Briggs that will fit into a ten speed....keep up the awesome!

[@IntelGoesHard]

Where did you get that differential type thing? That's a thing I could have used, but now I'm going to use a welded car differential

[@leslamarch]

I love the style !! I need one ;)

[@twots22]

Nice frankenmower! Great skills!

[@93jake81]

The blade is rotating the wrong way. That's why it doesn't work

[@moz2186]

That's what I was thinking too!! I can do more damage with a string trimmer than that!

[@scottyjones27]

Try flipping the blade??

[@jonathantagg6527]

Turn the engine 180° and use the opposite input on the transfer box. The pull start will usually bolt on every 120° so you're not stood in front of it to start. So it won't chop your cock off.

[@scootergeorge9576]

@@jonathantagg6527 Or just sharpen the other side of the blade.

[@jonathantagg6527]

@@scootergeorge9576 just thaught of that... Urgh over engineering stuff again.

[@brianeastman3547]

Cool man,Keep up the good work man.

[@OliverMotorized]

thanks Brian

[@jamesgreable3370]

3:53 "Oh my God, this project is so dumb". He said it... not me, lol. I love that you keep going with it till the end 👍👍👍

[@OliverMotorized]

haha thanks james

[@josephbarovich8733]

welding in shorts and no gloves, a man after my own heart

[@AnthonyCurreri]

The mantra of serious makers and engineers everywhere.... "it's good enough!" LOL

[@bill45colt]

cut the front open so weeds hit blades before bending them over,,,,or just buy a graveley

[@shitmonkey]

you could use that other shaft to make a drivetrain so ya don't have to push.. just a thought but with it going through a gearbox is the final rotational output going in the direction the blade was designed for?? great video

[@russk54]

Always a great show! 😎

[@OliverMotorized]

Thanks Russell

[@madisonstevens2586]

Really neat video Oliver! Quick suggestion. Putting the CVT (torque converter as you call it) would allow you to cut the shorter grass as you could really rev things up more. I liked the transfer case. Do you know if it's a 1:1 ratio? Also, couldn't help but notice your blade might have been flipped over. Anyways, cool vid. Keep up the good work. It's nice to see young men like yourself not wasting away playing video games.

[@OliverMotorized]

Thanks! the transfer case is a 1:1 So I figured it would spin around the same as a stock mower. I think a CVT would lower the RPM unless I red-line the engine while mowing lol

[@calebralston7905]

What if you cut the front open, giving the blades more of a chance to cut the brush?

[@TheWolfster001]

Nice build...
Looked like the blade rotation maybe going backwards, that could be why it doesn't look like the grass is being cut, but more ripped and pushed down...
I once built a double bodied lawn mower, I used two decks welded side by side, that could be a good build for ya, using that same motor but with two decks.. I loved mine...
Keep up the good work...

[@mrimbusyt]

Awesome as always 😁👍♥️

[@dominicpetruzzelli3134]

It may not cut grass so well, but it makes a great tomato slicer

[@rickyleblanc3945]

Would love to see this re-visited with the blade issue corrected.

[@timothyfink9354]

still wish you lived on my street.keep on building stuff.

[@natesyring8981]

Cut a notch out of the frk t of the mower so the blade gets the weeds before the mower frame does

[@johnmac8130]

Great inginuity and nice video

[@jeffboatman8201]

Its gonna make for some AWESOME footage when that chain comes off.

[@1badcumminsjr]

Yup
A simple chain guard Def needed

[@MowersNBlowers]

Great video man! Love the slow mo tomato carnage!

[@OliverMotorized]

cheers buddy

[@lesliegray3172]

Talk about a frankin mower it lives

[@AJRestoration]

What camera are you using?

[@OliverMotorized]

I use a lumix G7 and a gopro 7

[@keepinitgreasy7462]

I been waitin on a crazy cideo like this all my life

[@braeden20]

Put a chain guard on that thing broski! That chain is right in line with your junk

[@keithwittman4741]

And weld up a tensioner, flat stock with a bolt welded to it, and a sprocket at the end,pulling down the slack,between the two drive sprockets.

[@robertmiller5735]

I believe the only thing it needs now is a spring loaded chain tensioner sprocket

[@51-FS]

What kinda cuttung blade u useing?

[@markbuilt]

Your the guy I need to mount me a new gas tank on my poulan pro 200 brush saw and weed wacker or build me a tow behind mower for my ATV . That is wild

[@meg9570]

That's one of the best things I've ever seen on youtube!

[@grandpaseed]

i dont know if this was supposed to be funny but that reveal made me laugh , i am glad he was pushing that beast and not me.

[@OliverMotorized]

I was super serious

[@marshmower]

The Porsche of push mowers. Offers excellent turn in prowess.

[@FSAUDIOGUY]

Hell Yeah Bro! I love it and laughed so damn hard!

[@ronbonick4265]

dang I have a 20 hp I may try that with .. Ha Great idea

[@briand.1694]

Hope you don't have to mow any hills. The center of gravity is quite high.
That was one stubborn tomato!

[@brentbettis8663]

Nice build! 5 foot sticker bush calls for over kill. 👍

[@OliverMotorized]

heck yeah lol

[@piratepete-thetruthisforevery1]

@ 8:00 the video shows this machine you built can be used as a food processor too LOL!
Look out Vitamix corporation, this could be your next competitor... 🤣

[@OliverMotorized]

it does a poor job at that too haha

[@davidmontgomery9570]

What's the slow piano music your playing in your video sounds cool

[@robertmanley7556]

Dude let the haters hate its awesome it takes someone with talent and skill to build something using parts from other things that's a true designer / fabricator all in one I loved it keep building stuff man love your videos I think it's excellent for what you had on hand great work!

[@raymondj8768]

hahahaha it was totaly slicing that tomatoe bro lmfao

[@W3BZSL1NG3R]

Are the blades spinning the right way?

[@andypressley578]

That's one bad ass lawn mower 😁😊🤗😉😀

[@Fozzi21]

Another great video..

[@OliverMotorized]

thanks m8

[@wooderdsaunders6801]

Is the blade turning the corect way?

[@masterchu8044]

Well you went that far now just open up the deck more especially in the front and make some more adjustable and heavy duty wheels and that thing will go through alot lol

[@froggersgarage5127]

4 inch harbor freight tires that still move up and down 😆

[@MrDavidelliottjr]

I'd actually get you to build me one. Just a lil more balanced is only thing I would want deferent. But this is awesome.

[@harrys.3165]

I never thought my 3.5 hp Briggs and Straton lawn mower was powerful enough.!!!!!!

[@JeffsLittleEngineService]

lol! great video Oliver

[@mykee426]

That's awesome. Now I have seen everything on TH-cam lol

[@mikewawak1663]

Is the blade going the right direction to cut?

[@natevanlandingham1945]

Cool Blue Ford Truck!

[@woohunter1]

At the very least, with the widow maker you got there, chain guard and safety glasses.

[@Hankbob_Hillpants]

I never thought I’d see something jankier than my homemade motorbike

[@frostworxpcrepairrecycling4720]

Did you sharpen the blade makes a big difference

[@starpuss]

*LOL!!! I was Just... Looking at One of My Vtwin Engines thinking of doing the same thing LOL!!* (I started a "6HP Diesel Brush Cutter Video" Last year.. But never completed it)
for Clearing out land for my new shop. I TRIED my Best to kill My toro commercial mower, Cutting down 4FT Trees up to 1" so i could get the other unit going...
But did not blow it up yet other then blowing a Big Hole in the deck LOL! (It has a Blade Clutch) so that's whats saving it!
BTW New to Your Channel! Looks VERY Interesting LOL!

[@OliverMotorized]

haha sounds like you are cookn' up some mean projects as well bud! Thanks for checking out the channel!

[@tjslifeispie]

You should totally throw paint cans into the blades

[@rverro8478]

The adult side of me says WTF ? The boy in me says "Cool".

[@jimmybritt9537]

Mowing and exercising at the same time 😁👍🇺🇸

[@willwade1101]

Try building a push mower using a riding mower deck.

[@treatyourself7965]

Cool stuff