I'm glad you finally mentioned why you shouldn't trailer it with the roof on. I'm planning on taking mine on a 400 mile road trip to the mountains and hadn't read that or even heard anything about it. I noticed in an earlier video you also mentioned removing the windshield. Let me guess the velcro pulls off.
I have 300 Kms on my 2021 Hisun 500. It's so far been problem free and smooth to drive. I've necer used the winch but i have been into some bad terrain which this machine handles well. Great on fuel too!
My Hisun 500 has been great. No problems to report. Recently installed a light bar on my machine, that made a major difference at night. I buried my machine to the doors going across a shallow creek. The wench was a life saver.
@@gonedeep43 I live in the mountains and a full top would be nice i have a factory plastic top and i bought a back window for the cab i just need some half windows like a jeep ! I'm thinking about going to some upholstery shops and see if i can just get the half windows made i hate to give 600 bucks for a soft top that's pretty pricey considering all i really need is the top half of my windows to be completely enclosed ! I will get aggravated and build a hardtop ! lol
This one has been a good machine overall but i can’t stress enough you need to know how to turn a wrench on these. It really has been a good one though
Hey man, stopping by to see how your machine was doing and I recommend watching my latest UTV video if you haven’t it will save you some money. But love to see everyone going with these side by sides. Have a great day and I will catch you in the next one
Hey all. Just thought I'd weigh in with our pretty much horrible experience with a new Axis 700 purchased last May 2023 from Lowes in Winchester, VA. Brought it home, put about 10 hours on it and it won't hold a charge. LOOOOONG story, the mobile tech has been out 4 times, replaced the battery, voltage regulator twice. I told him in February I thought (after doing a bit of research) that it was the stator, since if kept on the trickle charger it reads 100% charged, run it 15 minutes and it's down to 40%-that means the stator is not charging the battery while it's running. Anyway, last time he came out the part that he was supposed to change out was shipped in too small a package and was bent and unusable. I have about a 10 page email chain to 6 different folks at Hisun in TX begging for some resolution. They ignore my calls, emails, voice mails, etc. Needless to say, we are really frustrated with the vehicle, the company, the mechanic; pretty much everything to do with this worthless POS. It is truly ridiculous to spend $10K on something that is now sitting in our garage torn apart waiting for the worthless mechanic once again.
I have aa question, what is the price of one of these? I was checking the Yamaha Rhino and to me they are looking the same I'm I wrong or really they are? They just have a different brand engine or even that is the same? I will appreciate if You or someone else answer my questions please
Get you some Aluminum flat bars drill them out 1/4 x 2" paint black it will bend to roof with hammer ! Had mine over 70 mph with no problems Had tap aluminum back down some but no big deal
What rpm does yours idle at when warmed up? I see it was at 16/1700 rpm but that was on a cold engine i’m guessing. I have an older carbureted model so just wondering what the efi’s run at.
Hi there. I'm hoping you see this cause I'm at wits end with my axis 700. You said you have a dealer who honors warranty work on these about 40 miles outside of Nashville. Would you mind letting me know who the dealer is because I can't find anyone. No one in this area warranty them and I was told the closest dealer that does warranty work is in San Diego. You can imagine what was said. Thanks!
Man i was almost sold on buying a used big brand but now im leaning towards one of the hisun machines new for the same price. Thanks bud. Cheers
Keep em coming, Lots of interest on these and not enough content anywhere!
I'm glad you finally mentioned why you shouldn't trailer it with the roof on. I'm planning on taking mine on a 400 mile road trip to the mountains and hadn't read that or even heard anything about it. I noticed in an earlier video you also mentioned removing the windshield. Let me guess the velcro pulls off.
I have 300 Kms on my 2021 Hisun 500. It's so far been problem free and smooth to drive. I've necer used the winch but i have been into some bad terrain which this machine handles well. Great on fuel too!
My Hisun 500 has been great. No problems to report. Recently installed a light bar on my machine, that made a major difference at night. I buried my machine to the doors going across a shallow creek. The wench was a life saver.
I just bought a light bar for mine ! The factory lights are pretty dim !
@@MegaGoogoohead My install was super easy. And, where I installed it, it looked like it came with a light bar.
@@gonedeep43 Hey if you find a good deal on a full top with enclosed doors let me know thanks !
@@MegaGoogoohead I will. This is my first winter with my Hisun, and having a full door would be great.
@@gonedeep43 I live in the mountains and a full top would be nice i have a factory plastic top and i bought a back window for the cab i just need some half windows like a jeep ! I'm thinking about going to some upholstery shops and see if i can just get the half windows made i hate to give 600 bucks for a soft top that's pretty pricey considering all i really need is the top half of my windows to be completely enclosed ! I will get aggravated and build a hardtop ! lol
Keep them coming Casey. I have a 700 as well. Appreciate your vids.
I’ve got about 9 hours on my 750 crew from lowes, so far no problems
Thanks for the update , I think l am going to get one.I have been riding atvs for most of my adult life but now I think it is time for a side x side.
This one has been a good machine overall but i can’t stress enough you need to know how to turn a wrench on these. It really has been a good one though
Hey man, stopping by to see how your machine was doing and I recommend watching my latest UTV video if you haven’t it will save you some money. But love to see everyone going with these side by sides. Have a great day and I will catch you in the next one
Hey all. Just thought I'd weigh in with our pretty much horrible experience with a new Axis 700 purchased last May 2023 from Lowes in Winchester, VA. Brought it home, put about 10 hours on it and it won't hold a charge. LOOOOONG story, the mobile tech has been out 4 times, replaced the battery, voltage regulator twice. I told him in February I thought (after doing a bit of research) that it was the stator, since if kept on the trickle charger it reads 100% charged, run it 15 minutes and it's down to 40%-that means the stator is not charging the battery while it's running. Anyway, last time he came out the part that he was supposed to change out was shipped in too small a package and was bent and unusable. I have about a 10 page email chain to 6 different folks at Hisun in TX begging for some resolution. They ignore my calls, emails, voice mails, etc. Needless to say, we are really frustrated with the vehicle, the company, the mechanic; pretty much everything to do with this worthless POS. It is truly ridiculous to spend $10K on something that is now sitting in our garage torn apart waiting for the worthless mechanic once again.
I have aa question, what is the price of one of these? I was checking the Yamaha Rhino and to me they are looking the same I'm I wrong or really they are? They just have a different brand engine or even that is the same? I will appreciate if You or someone else answer my questions please
Get you some Aluminum flat bars drill them out 1/4 x 2" paint black it will bend to roof with hammer ! Had mine over 70 mph with no problems Had tap aluminum back down some but no big deal
Any video of the removal of the 700 motor? raer seal leaked water in
It looks like the top windshield just needs to be turned around ??
Yeah i tried that too. But it won’t work
Thanks for the update
I had the same seat belt issue but solved it by blowing the wind up housing out with compressed air until no debris comes out. I also oiled mine.
Update with mileage and hours?
What rpm does yours idle at when warmed up?
I see it was at 16/1700 rpm but that was on a cold engine i’m guessing.
I have an older carbureted model so just wondering what the efi’s run at.
It stays right around 1500 when warm
Hi there. I'm hoping you see this cause I'm at wits end with my axis 700. You said you have a dealer who honors warranty work on these about 40 miles outside of Nashville. Would you mind letting me know who the dealer is because I can't find anyone. No one in this area warranty them and I was told the closest dealer that does warranty work is in San Diego. You can imagine what was said. Thanks!
It’s in Lavergne TN J&K small engines
@@caseymaples19xxThank you so much. You have no idea how big a help you were. Thank you.
Is there a noticeable difference in power from the 500 to the 700, I've heard both sides whatcha think?
Check out my other videos to see my thoughts, but short answer is yes huge difference
Could you elaborate or send a link to the "snatch bar" or whatever you call it for the wench update? Looking to buy a 750 tomorrow from Lowes...
It’s a snatch block for a winch several people sell them, a quick Google search should show some for purchase they are usually around $30
Glad to hear you found a good service center. Who do you use?
J&K small engines Lavergne TN
What company did you get to fix I have the 500
J&K small engines Lavergne TN
Sounds like that undercoating worked for the neighbor's dog.
Where can you find replacement parts or accessories?
Readily available online and through eBay or Amazon
Where's That Service Center Located ?
Lavergne TN
Is this made by the axis company
Nothing is made by Axis that’s just a rebrand name
@@caseymaples19xx High quality machines!
Would you recommend this utv?
I would, watch my other videos
@@caseymaples19xx Awesome it looks nice!
why is massimo in your title, they are not make by hisun
Because hisun builds the Massimo. Massimo is just the assembler located in Texas. Same machines you see. Easily found on hisun and massimo webpages
DANG I BEEN LUCKY I GUESS ! WAS THE BOLTS LOOSE FROM THE FACTORY ! i
Yep loose at purchase
WHHS Class Of "81"
The seatbelt could be due the roll over.
What's the top speed?
50 ish