Thank you Romi! Because of this video I was able to fix my airflow gauge because it was due to a control panel. Just in time for winter to hit. ❤ I subbed.
Had no heat and no AC. I followed your instructions but fortunately all I had to do was disconnect everything, blow out some dust and connect them again and it worked! Thank you for this video. Mine didn't burn up.
Thanks for this video, it saved me a few hundred bucks. I payed $80 on eBay for the part, instead of paying a mechanic a few hundreds for a “wiring” issue.
You are awesome Romi. I have been plagued with the fan speed switch being stuck for 6 months. Luckily it was on high, just controlled the temp with the temp control knob. But sometimes you want the air speed lower. Yours is the only video I could find on it. I had it done in about 5 mins. Thank you so much. I subscribed.
I appreciate this. I would've never thought about the control panel. I replaced the resistor and had no change. Usually that's the case when the heat only works on the last two high settings. I also have a slight electrical burning smell that's concerning so this is the first thing I have to look at in the morning. Thanks again. 🙏
Thank you very much for your video. I'm 1000 miles from home in a desert and my fan control went out. I was able to jumper it to get full fan speed on all the time by connecting the top and bottom large wires. I was thinking it might be the blower motor or resistor but then after a quick test with a jumper wire I was able to tell it was the board.
Thank you thank you. You are right no other video has this model car on how to replace this unit. Saving me money. Just order my part and going to replace it today. So helpful.
Thank you! Mine has been acting wonly for a few years now, and just burned out completely today on my way home from work. Smoke pouring out of that dash and everything. (Pro tip, don't wait as long as I did 😮) I figured this wouldn't be too hard, but you probably saved me from cracking the panel or breaking a clip.
You are AMAZING! Thank you so much! I’ve already had mine replaced TWICE because of this and I am so sick of paying for it. You just saved me gobs of money! God bless you!
I have 2014 Dodge Avenger and almost 2 years ago my ac just stopped working. Has freon I can hear the ac clutch kick on heat works fine. Could it still be the climate control?
Door flap actuator hard to get to but it's easy to fix and it happens to every dodge advenger along with the trottle body goes out and the window switch. They try to make it as good as the Ford fusion but failed in every way but it's a car so not gonna complain to much the actuator is like 30 if you get it online from rock auto autozone is like 55 orileys wanted 65 I paid 30 and haven't had not one problem
Luckily, you’re able to get to it easily by removing the glove box door from its harness: there is a steel cord on the side of the glove box flap that you should remove before removing the glove box. The blend actuator is to the left near the temperature control panel.
What was your heater issue? I’m currently experiencing an issue where the heat won’t come on. (I turn the center dial, and it stays the same cold temp). There’s no blend door movement. I bought a new blend door, and it didn’t fix the issue.
Bill Thoden Yep! There’s a third blend door I didn’t know about. It’s on the left side of the center console, on the drivers side. That one controls the amount of heat comes in to the cabin. Replaced that one, and it worked.
@@candicewashington8438 replace the blend door actuator in the driver side of the center console under the steering wheel. side panel comes off. there one wedged up in the side. This one controls how much cold/hot air comes into the cabin
Thanks for the video...this is exactly what I needed to see. Can I ask, was the issue with the knobs themselves? The problem I have is the blower knob turns, but not smoothly anymore and I have to get it in just the right spot for the AC to blow. It blows on high or nothing. So I think it's just the knob out of line, or maybe burned up like you said in the video. Thanks again!
I changed the heater fan resistor on mine. Im only getting one speed on my fan. Before i replaced it i had no speeds. What was yours doing to know you had to change it ?
What if we dont see any melted spot? Do you think it could be something else? Having same exact problem though. Only hot air on driver side. Only on the high setting
You might want to do research on the blower resistor motor. Located under the dashboard behind the glove box. Easy to get to, only two screws and plug in.
Mine is having the same problem. Only getting hot air on the driver side vent. I dont see any melted plastic like in the video on mine though. Any luck with your yet?
I replaced my thermostat because I was getting that faulty code. Hoped that would fix my issues.... Nope. In fact, it fixed AN issue, but I still only get heat on the drivers side and by "heat", I mean warm at best.
@@Dejaro1337 I did not. I eventually lost all heat. Replaced my thermostat, and that fixed the heat on my drivers side. I've replaced the vent door actuator... still no heat on passenger side. I believe my issue is going to be the dreaded expensive heater core that I'm told is about $1200 to repair
Hey you shouldn't have to replace the whole thing open it up and clean the connections that's what I did it will have melted plastic most likely all over it and you just have to scrape it all off and I did that and now mine works perfectly
Your heat coil is going out. That’s why. Especially when it’s the driver side blowing hot air and the passenger side blows cold air. Hope this helps someone.
My heat only blows hot air when you put the control setting to the first "head air" flow only option on the 3rd dial and push the first dial in for "internal" air flow to illuminate the light on the car symbol. Is my control switch bad as well? I have a 2012 Avenger.
Hi Romi. I have the exact same ac control as yours, a 2014 dodge avenger. I took it out with the screwdriver but the problem I am having is pulling the wires out of the box itself. How did you pill the wires out of it?
I have a 2014 Chrysler 200 Limited 3.6 and the heat sorta works, but only on 76 and 79. If I turn the knob onto anything other than 76 or 79, it blows cool air. Any ideas what could be the cause of that?
Make sure your unit is the same as mine. With that said my fan/blower only worked on high before it stopped working completely. Haven't had a problem since I changed the unit.
Just know that you are too cool...for sharing this video. I have the exact car I'm the exact push buttons. I can't thank you enough I have a new mechanic and he wants to charge me $80 just to put in my battery can you believe it I don't know I must look like I have a stem on my head I mean I don't but he's out of control thank you
I had the clicking problem. I replaced the blend door actuator and it still clicks. Do you think doing this will fix the problem? Maybe the control knob isn't telling the actuator the right thing to do?
Hah, no kidding. I had a dead battery before work one day, I called in and said I'd be an hour late so I could change it. Took me 3 hours to do. What kind of genius designs a car with the battery behind the wheel instead of under the hood?
Soo i got the 2013 dodge avenger se same issue AC/HEAT only works on lvl 3 and 4 , lvl 1 and 2 doesnt blow, i changed the blower resister and nothing u think replacing this part could fix it?
Freddy Juarez same exact problem I had, then eventually it stopped working on hi also. I did the blower resister motor also with no luck. Soon has she plugged it in, heat and ac. Perfect timing also cause it is COLD! Lol
rockit kid with it connect if you push the buttons do the lights still light up? I’m having this issue. The blower fan does not kick on which I know is good but the defrost light and the rear air light come on if I push them
Use to work, then it only worked on hi, then nothing at all, no blower nothing. If I get on the hi-way their seem to be a lil heat. Changed the climate control and every thing works.
Hi i remote start my car during winter. Setting on max heat. But will have cold air come out of the vents. I have to turn the it to cold setting and turn back to warm to start having warm air. Anyone have this issue? It goes down to -40 where i live. I wonder if it will fox the problem? 2013 dodge avenger
I did this replaced it because it stopped blowing air at all no heater or air replaced it and it works now it blows out the air but it won’t get cold before it was ice cold before any problems did anybody have that problem?
Thank you Romi! Because of this video I was able to fix my airflow gauge because it was due to a control panel. Just in time for winter to hit. ❤
I subbed.
Had no heat and no AC. I followed your instructions but fortunately all I had to do was disconnect everything, blow out some dust and connect them again and it worked! Thank you for this video. Mine didn't burn up.
Awesome!
Thank you for this video I have a 2013 dodge avenger and have the exact setup I have searched so many videos this actually helped ❤
Good fix. I do mobile diagnostics and repairs, but it is still nice seeing people do their own fixes on fairly simple items!
Do you help people on here? I'm trying to fix my girls car. This exact model.
Thanks for this video, it saved me a few hundred bucks. I payed $80 on eBay for the part, instead of paying a mechanic a few hundreds for a “wiring” issue.
Thank you for making this. Just like you said, there are no other videos that are on this specific model. Thank you so much.
No prob, yup getting cold again
You are awesome Romi. I have been plagued with the fan speed switch being stuck for 6 months. Luckily it was on high, just controlled the temp with the temp control knob. But sometimes you want the air speed lower. Yours is the only video I could find on it. I had it done in about 5 mins. Thank you so much. I subscribed.
Did you have to replace the part to get it unstuck or did you get it unstuck when you opened it?
Replaced the part. Very easy though. It has been working great for months now.
I appreciate this. I would've never thought about the control panel. I replaced the resistor and had no change. Usually that's the case when the heat only works on the last two high settings. I also have a slight electrical burning smell that's concerning so this is the first thing I have to look at in the morning. Thanks again. 🙏
Yeah I did the resistor first also, and no change
My middle knob started smoking today and ive been trying to figure out how to take that off. Love learning something new!!
Thank you very much for your video. I'm 1000 miles from home in a desert and my fan control went out. I was able to jumper it to get full fan speed on all the time by connecting the top and bottom large wires. I was thinking it might be the blower motor or resistor but then after a quick test with a jumper wire I was able to tell it was the board.
Thank you thank you. You are right no other video has this model car on how to replace this unit. Saving me money. Just order my part and going to replace it today. So helpful.
Also go to the junk yard, find and pull an extra one for standby .
Oh my goodness! This is the best video ever! I'm glad that I have run across this video! So helpful!!!!
Baby thanks so much I fixed mine today in about 5 minutes
Hit the junk yard and find another one just to have on standby.. I replaced it twice. Should have been a recall.
Thank you! Mine has been acting wonly for a few years now, and just burned out completely today on my way home from work. Smoke pouring out of that dash and everything. (Pro tip, don't wait as long as I did 😮) I figured this wouldn't be too hard, but you probably saved me from cracking the panel or breaking a clip.
You are AMAZING! Thank you so much! I’ve already had mine replaced TWICE because of this and I am so sick of paying for it. You just saved me gobs of money! God bless you!
Danielle Taylor Glad it helped
IVery insightful video straight and to the point. Is it an expensive part to replace.
No
thank you very much I have exactly a 2014 Dodge avenger and my heat stopped working and I live in Seattle and so thank you again
Glad it helped. It is really a sham, so many people having the same problem.
Thank you for your video. It saved me $100 to do it myself
Thanks so much! My issue is the temp is stuck on hot and the position is stuck on defrost. Think this would be the issue?
Have a 2013 avenger,same set up. Thank you,you're video was very helpful.👍
So simple thank you for this just had this issue with my Avenger
I have 2014 Dodge Avenger and almost 2 years ago my ac just stopped working. Has freon I can hear the ac clutch kick on heat works fine. Could it still be the climate control?
Thanks
Thank you for sharing. My mom has the same car and has the same problem.
Thanks Romi 👍 Excellent video 😊
Thank you!! This was very helpful making my repair and saved me a lot of time.
What exactly does this control? Mine blinks non stop and eventually will kick the ac on.
That was helpful now I have air-conditioning Great video
It really is a shame this many people is having this problem, I don't know about you but I will do my research before I buy another car.
you go... anyone have a clicking sometimes like maybe where the fan is ,, sounds like something slapping the fan blades ?
xdrfox that's the blend door actuator there are other videos about that.
Door flap actuator hard to get to but it's easy to fix and it happens to every dodge advenger along with the trottle body goes out and the window switch. They try to make it as good as the Ford fusion but failed in every way but it's a car so not gonna complain to much the actuator is like 30 if you get it online from rock auto autozone is like 55 orileys wanted 65 I paid 30 and haven't had not one problem
Luckily, you’re able to get to it easily by removing the glove box door from its harness: there is a steel cord on the side of the glove box flap that you should remove before removing the glove box. The blend actuator is to the left near the temperature control panel.
You’re awesome! I just took it out and plugged it back in and it was fine. Thank you!!
Thank you, pls subscribe. I'm slow with my post, but I have more coming.
Wow, thank you thank you... it did help and exactly what I was looking for. Great job!
THANK YOU THANK YOU THANK YOU, it took a few calls locating the part but i found 1
So easy right? Please subscribe i need it.
Romi's DIY Projects I have a 2013 dodge advenger and it won’t blow hot air out only cold changer heater core etc still would that be my problem
What was your heater issue? I’m currently experiencing an issue where the heat won’t come on. (I turn the center dial, and it stays the same cold temp). There’s no blend door movement. I bought a new blend door, and it didn’t fix the issue.
Did you ever figure it out my mom's car is doing the same thing. On heat seating still cold air.
Bill Thoden Yep! There’s a third blend door I didn’t know about. It’s on the left side of the center console, on the drivers side. That one controls the amount of heat comes in to the cabin. Replaced that one, and it worked.
I have no heat at all! Tell me what I need to do? Blows fine... just not hot?
@@candicewashington8438 replace the blend door actuator in the driver side of the center console under the steering wheel. side panel comes off. there one wedged up in the side. This one controls how much cold/hot air comes into the cabin
@@PaxPsych0sis should I do that one or the one's in the glove compartment? Those are the one's that are blowing cold. The driver side one gets warm?
Does this solve the issue of cold air only blowing on the passenger side? I have a 2012 avenger
speedy 702 I have the same did you get it fixed
Sounds like a blending door or controller
Il looking for same fix
I have the same issue warm hot air on the driver side and cold on the passenger side
If any of you figured it out message me please lol I have the exact same issue on 2012 avenger ^^
thank you so much for this video fixed our heat problem in under 10 minutes
Minnie Aaron awesome!!!
This is very helpful. Thank you so so much.
Great vid, I have the same year and model and yes mine went out also. Thanks
Thanks for the video...this is exactly what I needed to see. Can I ask, was the issue with the knobs themselves? The problem I have is the blower knob turns, but not smoothly anymore and I have to get it in just the right spot for the AC to blow. It blows on high or nothing. So I think it's just the knob out of line, or maybe burned up like you said in the video. Thanks again!
Sound like the blower resistor motor (also a simple fix) located under the glove box. Two screws and a plug
I changed the heater fan resistor on mine. Im only getting one speed on my fan. Before i replaced it i had no speeds. What was yours doing to know you had to change it ?
I had one speed (high) after a yr or so. I was getting nothing. Then I changed it.
What if we dont see any melted spot? Do you think it could be something else? Having same exact problem though. Only hot air on driver side. Only on the high setting
You might want to do research on the blower resistor motor. Located under the dashboard behind the glove box. Easy to get to, only two screws and plug in.
Or the actuator is bad.
Exactly what issues were you having? My 2012 Avenger has stopped blowing hot air. It started on the passenger side now its completely.
Same here, I'm wondering if this should be my fix
Mine is having the same problem. Only getting hot air on the driver side vent. I dont see any melted plastic like in the video on mine though. Any luck with your yet?
I replaced my thermostat because I was getting that faulty code. Hoped that would fix my issues.... Nope. In fact, it fixed AN issue, but I still only get heat on the drivers side and by "heat", I mean warm at best.
@@theMapex25 have you found a fix yet?
@@Dejaro1337 I did not. I eventually lost all heat. Replaced my thermostat, and that fixed the heat on my drivers side. I've replaced the vent door actuator... still no heat on passenger side. I believe my issue is going to be the dreaded expensive heater core that I'm told is about $1200 to repair
Mine only blows air no heat is this the problem? If not what could mine be?
No not the same problem. You need to maybe look up, blend door actuator
I was hoping it was as simple as yours but of course I’m not that lucky! Thank you for responding!!
Hey you shouldn't have to replace the whole thing open it up and clean the connections that's what I did it will have melted plastic most likely all over it and you just have to scrape it all off and I did that and now mine works perfectly
How do you open the back? It's nearly impossible with the 4 tabs .
@@chevy2599 it’s a pain in the dick
thanks so much for this video you save me a lot of money
You are welcome glad i can help
So what was your problem? I'm having a heating issue where no heat but ac is ice cold.would this be my ptoblem?
why does one of my vent blows warm air and the other blows cold
Your heat coil is going out. That’s why. Especially when it’s the driver side blowing hot air and the passenger side blows cold air.
Hope this helps someone.
My heat only blows hot air when you put the control setting to the first "head air" flow only option on the 3rd dial and push the first dial in for "internal" air flow to illuminate the light on the car symbol. Is my control switch bad as well? I have a 2012 Avenger.
Not sure what's going on there, totally different problem
Hi Romi. I have the exact same ac control as yours, a 2014 dodge avenger. I took it out with the screwdriver but the problem I am having is pulling the wires out of the box itself. How did you pill the wires out of it?
They should be just like a plug. Just unplug them. One may have a red tab/lock on it. Just slide it back and unplug
I will give it a go again. Thank you Romi
Mine works it's just that I have to put it on high to feel any heat really. It just started acting like that recently.
That's where it starts, it will go out completely, sooner or later.
@@RomisDIYProjects thanks 👍I will be replacing it soon then. I appreciate the video.
I have a 2014 Chrysler 200 Limited 3.6 and the heat sorta works, but only on 76 and 79. If I turn the knob onto anything other than 76 or 79, it blows cool air. Any ideas what could be the cause of that?
Make sure your unit is the same as mine. With that said my fan/blower only worked on high before it stopped working completely. Haven't had a problem since I changed the unit.
@@dbobo5255 The unit is the same, just the print on the faces of them are different between the 200 and Avenger. My fan works on all settings.
Did you figure it out
No, but a few people seem to think it's an issue with one of the blend door actuators.
Just know that you are too cool...for sharing this video. I have the exact car I'm the exact push buttons. I can't thank you enough I have a new mechanic and he wants to charge me $80 just to put in my battery can you believe it I don't know I must look like I have a stem on my head I mean I don't but he's out of control thank you
I had the clicking problem. I replaced the blend door actuator and it still clicks. Do you think doing this will fix the problem? Maybe the control knob isn't telling the actuator the right thing to do?
If I'm not mistaken. The Avenger has three actuators. You might need to find and check the others. No the control module will not help
@@RomisDIYProjects I will Do that. Thanks!
What exactly was that doing was heat coming out on one side and air on the other one or did it just quit all together
Tim Blackburn No heat or air stop working altogether
thanks dear ♥️
Thanks, Romi !! helped a lot
Thank you pls subscribe
thank you for the video
Thanks! Got it.
Thank you for your video very helpful
If helpful please subscribe. I'll be bringing more videos
That overheated melted shit should be a safety issue
Indira Allfree yeah mine started smoking that how I knew something melted
@@malikbowman6020 mine did too.
I sent the car back to the lender. I think they scrapped it.
You just saved me a lot of money !
B. Shambre good, that's the reason we made the video!
Thank you so much, you've helped me tremendously and save me a lot of money.!!!yea!👍
Did you have to unhook the battery?? I hate where the battery is
Hah, no kidding. I had a dead battery before work one day, I called in and said I'd be an hour late so I could change it. Took me 3 hours to do. What kind of genius designs a car with the battery behind the wheel instead of under the hood?
No i didn't remove the battery
God bless you God bless you God bless you God bless you
Soo i got the 2013 dodge avenger se same issue AC/HEAT only works on lvl 3 and 4 , lvl 1 and 2 doesnt blow, i changed the blower resister and nothing u think replacing this part could fix it?
Freddy Juarez same exact problem I had, then eventually it stopped working on hi also. I did the blower resister motor also with no luck. Soon has she plugged it in, heat and ac. Perfect timing also cause it is COLD! Lol
Freddy Juarez It will cost you nothing to check it yourself. If you see a melt mark like she described in the video, that's probably it.
Same EXACT problem I’m working on now!!! Thank you so much for posting! I just need to find the part number now!
Kilroy Here you will find the part no# on the label, like the one you see in video
i have a 2013 dodge avenger And I'm having this same problem when you installed it did you disconnect your battery
rockit kid with it connect if you push the buttons do the lights still light up? I’m having this issue. The blower fan does not kick on which I know is good but the defrost light and the rear air light come on if I push them
@@paulhammock9710 i fixed it i just got a bad module so i had to get another one but thx for this video you saved me a lot of time and money
Thank you romi
I didn't disconnect the battery
If this helped pls subscribe trying to get to 200
There's a recall on my airbags and seatbelt...I also have a rack and pinion issue . But that could be Denver streets
Thank you thank you, I was having the same issue and dreaded having to go to a mechanic.
You are so welcome, it's to cold😄
Thanks 😊
Your welcome!
Thank you Romi!!!
Thank you so much!!
Great video! Good work!
If this helped pls subscribe trying to get to 200
Thank you
Does that fix the reason why it's only throwing out cold air from the passenger side.. Cuz if not I need a new heater core 😣😖😫😩😣
Sonia Espindola sounds like a totally different problem.
TheTankonWheels yeah I already talked to a body shop and asked them if they could help me get it fixed cuz still suppose to keep snowing where I live
Sonia file a complaint about it! Mine does the same and the defrost only works on 3/4 of the window
MrMannie1524 I got flushed with clr and it helped bring in more heat..Idk I can't keep wasting more money on this car it's not worth it
Sonia Espindola same problem I'm having. Seems to be a issue with these cars
Mine is has heat coming from driver side but not the passenger side can I fix it the same way?
Not sure if that's the same problem.
Here is a like to what your problem may be. th-cam.com/video/BfFnC0hayyw/w-d-xo.html
Is yours the same as my 2012?
2014
@@RomisDIYProjectsNO it's my heater core that is clogged
What were the actual symptoms of your problem?
Use to work, then it only worked on hi, then nothing at all, no blower nothing. If I get on the hi-way their seem to be a lil heat. Changed the climate control and every thing works.
Very helpful vid! Thanks!!
Ty ms romiii ❤
Thanks ma
Hi i remote start my car during winter. Setting on max heat. But will have cold air come out of the vents. I have to turn the it to cold setting and turn back to warm to start having warm air.
Anyone have this issue? It goes down to -40 where i live.
I wonder if it will fox the problem?
2013 dodge avenger
Thank you for your help.
How much is it
Thank you so much
Helped me thank you
I did this replaced it because it stopped blowing air at all no heater or air replaced it and it works now it blows out the air but it won’t get cold before it was ice cold before any problems did anybody have that problem?
samantha woolverton might want to check freon.
TheTankonWheels okay thank you will do that next!
Unfortunately Felton was completely full so now we are out of ideas will have to take to a mechanic bummer
your a smart gal
Thank you, if it helps. Pls subscribe!
My car only blows cold air but when I switch it to heat it still blows cold air
th-cam.com/video/LUBPIxzrUeI/w-d-xo.html
There is also and actuator behind the glove box. Look up videos for blend door/actuator
YOUR HIRED
Damaion Ennis Lol
If this helped pls subscribe trying to get to 200
Thank you