I personally think that this model is the better of the rest; the H16BM; and fastest. That brushless 4200kv motor is super FAST! On 3S (depending on the batt) it’s more than enough (I’m running it on OVONIC 3S 35C 2200mah, held by zip ties; had to remove original bracket that holds the original 2S batt.) I got this model because it looks the best, especially the black cover. But it won’t last too long, sadly, especially on 3S batt. And I can’t seem to find a replacement anywhere online. Mine is already all beat up : /Lost all of my original clips already. They come off too easy, after few flips. The light bar is no longer working (after going through a small puddle of water one day.) Truck was acting up after that too. I had to use a straw to blow the water out of the transmitter and everything else; thought it was “water resistant.” Got it dried up and it worked fine after, except the light. Staying away from water after that. I ended up installing my own LED lights, two front, and two red in the rear (since it never came with it.) Plugged it in the spot where the original light goes (plus there’s an extra open slot.) I’d also recommend putting a lock tide on the screws, especially on the wheelie bar wheels (if you’re going to use 3S batt.) And the suspension. I lost one wheel with a screw, and can’t find a replacement screw; ended up ordering the whole thing on ebay.) Until then, I’ve been grinding the plastic 🙈 It keeps the car from flipping over, under controlled speed. But I wouldn’t go too long that way, as it eats up the plastic real quick (on the asphalt) and you won’t be able to reinstall the wheels in the original holes. Although you can rig something up, if that happens. Or just purchase a new one (about $20,) if you find it. In fact, I’m thinking of rigging the tips with some metal. That way I won’t have to worry about losing anything or breaking. Not like it’ll slow it down. I mean, you’re already wheeling due to so much power. So I’m not worried about having a wheels spin to lose the drag, while on the rear tires; when I can’t even steer haha. It’ll wheelie all day! The thin spoiler it came with is useless 👎🏼 It broke off in pieces after the first flip over, on the 3S batt. I ended up installing different spoiler from another rc car. More durable one, that’s made of flexible plastic. Still holding up pretty good; after many hard flips at high speed. The body pillars will get damaged as well, especially on the street. I ended up using rubber end caps (that tightly fit over) in order to save them for a bit longer, but even those don’t last too long (with 3S batt.) Using them also saves the pins. I fit the cap over, then put the pin through the rubber cap. It keeps the caps and the pins in place (more securely,) until the rubber cap gets destroyed. The wheels on this model is also a weak link. I have two that pop out of the rim (on 3S batt,) then it drives a bit crooked. I’ll try supergluing them, and see if that solves the problem. Or get better wheels all together. I didn’t notice any lag on the controller. No complaints there. Over all, it’s a great rc car. And whether you’re going to bash it on the ramps or just drive it like you stoled it on the street (with 3S batt,) it will get damaged, one way or another. It requires more maintenance than I expected. That includes cleaning. And will get beat up pretty quick (on 3S batt,) in short period of time. So expect to replace things sooner than later. Mine is only about two weeks old, and I’m sure many don’t even make it that far haha.
I buy this little one week ago. I have it from Amewi. Brusheles Truggy too. I am pleasantly surprised by the workmanship and driving characteristics of the model. I bought two 1500mah 2S NANO-TECH batteries. I drive 25 min +- on the original battery, 30-40 min on the Nanotech one. Which is absolutely amazing. I put softer oil in the shock absorbers, because the original one seemed too stiff and the car was generally hard. After the change, everything was fine. I also tried to put a road set of wheels with a slick pattern, because I ride mostly in the skate park and I can say that it is really fun. Amewi Hyper go brushes Truggy is the only model from this brand that I have, otherwise I have models from LC racing. However, I can recommend it, it's a small car with a lot of potential, very durable and powerful.
what a smart little car. it looks like a monster. you should find a lil bashing area and give it a good run, with 3s. another great video, keep it up. cheers.
First off this is a fantasticly built machine the issue I am having is communication with the servo connection (i think?). Bought the first one had this issue thought it was a fluke exchanged it and same issue. Both times they only run for about 10 min and then the throttle stops. Turn off and back on, throttle works UNTIL I turn the steering wheel. It just stops. Steering still works, but no throttle. Blinking red light on the + side of the power box. I changed out the battery, still happeneing. This happened to both of them, both on day one, within one hour of use. They do let you return them so that is a plus. I can not recommend this product.
I'm used to rc car & trucks, this is my first brushless one, I'm going to take it slow to learn how it responds to throttle response & steering inputs be for I go ham on it
Do you know what specifications the tires have? To know which ones I can buy? I want to replace them too but I don't know the measurements or what hex number it uses
That thing almost has too much power it probably jumps really good cause you will be able to stabilize in the air go to a place with jumps or skate park
Bro PLZZZZZZZZ PLZZZZ PLZZZ CAN YOU UNBOX THE JETWOOD 1:16 BRUSLESS RC CAR AND PLZZ RUN IT ON 3S BATTERY PLZZZZ PLZZZZ BRO I LOVE YOUR CONTENT ❤❤❤❤❤❤❤❤❤❤😊😊😊😊😊
Anybody having trouble with the cheap body pins I found a solution you just push them all the way in and then they secure quite well I haven’t lost a pin yet
I personally think that this model is the better of the rest; the H16BM; and fastest.
That brushless 4200kv motor is super FAST!
On 3S (depending on the batt) it’s more than enough (I’m running it on OVONIC 3S 35C 2200mah, held by zip ties; had to remove original bracket that holds the original 2S batt.)
I got this model because it looks the best, especially the black cover.
But it won’t last too long, sadly, especially on 3S batt. And I can’t seem to find a replacement anywhere online.
Mine is already all beat up : /Lost all of my original clips already. They come off too easy, after few flips.
The light bar is no longer working (after going through a small puddle of water one day.) Truck was acting up after that too. I had to use a straw to blow the water out of the transmitter and everything else; thought it was “water resistant.”
Got it dried up and it worked fine after, except the light.
Staying away from water after that.
I ended up installing my own LED lights, two front, and two red in the rear (since it never came with it.)
Plugged it in the spot where the original light goes (plus there’s an extra open slot.)
I’d also recommend putting a lock tide on the screws, especially on the wheelie bar wheels (if you’re going to use 3S batt.) And the suspension.
I lost one wheel with a screw, and can’t find a replacement screw; ended up ordering the whole thing on ebay.)
Until then, I’ve been grinding the plastic 🙈 It keeps the car from flipping over, under controlled speed. But I wouldn’t go too long that way, as it eats up the plastic real quick (on the asphalt) and you won’t be able to reinstall the wheels in the original holes.
Although you can rig something up, if that happens. Or just purchase a new one (about $20,) if you find it.
In fact, I’m thinking of rigging the tips with some metal. That way I won’t have to worry about losing anything or breaking.
Not like it’ll slow it down. I mean, you’re already wheeling due to so much power. So I’m not worried about having a wheels spin to lose the drag, while on the rear tires; when I can’t even steer haha.
It’ll wheelie all day!
The thin spoiler it came with is useless 👎🏼
It broke off in pieces after the first flip over, on the 3S batt.
I ended up installing different spoiler from another rc car. More durable one, that’s made of flexible plastic. Still holding up pretty good; after many hard flips at high speed.
The body pillars will get damaged as well, especially on the street.
I ended up using rubber end caps (that tightly fit over) in order to save them for a bit longer, but even those don’t last too long (with 3S batt.)
Using them also saves the pins.
I fit the cap over, then put the pin through the rubber cap.
It keeps the caps and the pins in place (more securely,) until the rubber cap gets destroyed.
The wheels on this model is also a weak link.
I have two that pop out of the rim (on 3S batt,) then it drives a bit crooked.
I’ll try supergluing them, and see if that solves the problem. Or get better wheels all together.
I didn’t notice any lag on the controller. No complaints there.
Over all, it’s a great rc car. And whether you’re going to bash it on the ramps or just drive it like you stoled it on the street (with 3S batt,) it will get damaged, one way or another.
It requires more maintenance than I expected. That includes cleaning.
And will get beat up pretty quick (on 3S batt,) in short period of time. So expect to replace things sooner than later.
Mine is only about two weeks old, and I’m sure many don’t even make it that far haha.
I buy this little one week ago. I have it from Amewi. Brusheles Truggy too. I am pleasantly surprised by the workmanship and driving characteristics of the model. I bought two 1500mah 2S NANO-TECH batteries. I drive 25 min +- on the original battery, 30-40 min on the Nanotech one. Which is absolutely amazing. I put softer oil in the shock absorbers, because the original one seemed too stiff and the car was generally hard. After the change, everything was fine. I also tried to put a road set of wheels with a slick pattern, because I ride mostly in the skate park and I can say that it is really fun. Amewi Hyper go brushes Truggy is the only model from this brand that I have, otherwise I have models from LC racing. However, I can recommend it, it's a small car with a lot of potential, very durable and powerful.
what a smart little car. it looks like a monster. you should find a lil bashing area and give it a good run, with 3s. another great video, keep it up. cheers.
Thank very much my friend
No need to apologize dude Not at all.😊
Which battery are those that fit on the H16BM?? Ty
First off this is a fantasticly built machine the issue I am having is communication with the servo connection (i think?). Bought the first one had this issue thought it was a fluke exchanged it and same issue. Both times they only run for about 10 min and then the throttle stops. Turn off and back on, throttle works UNTIL I turn the steering wheel. It just stops. Steering still works, but no throttle. Blinking red light on the + side of the power box. I changed out the battery, still happeneing. This happened to both of them, both on day one, within one hour of use. They do let you return them so that is a plus. I can not recommend this product.
I am sorry your have problems but I and many other TH-camrs haven't had this problem. I am curious who did you buy this from?
Whats a good 3s battery that fits and works good? Anyone got any Amazon links?
I got mine to day and it looks awesome, I'm using small paper clips to hold the body on, I'm going to paint them black to match the body
Put 1:24 scale body clips
I'm used to rc car & trucks, this is my first brushless one, I'm going to take it slow to learn how it responds to throttle response & steering inputs be for I go ham on it
Do you know what specifications the tires have? To know which ones I can buy? I want to replace them too but I don't know the measurements or what hex number it uses
Standard 12 hex Bro
@@MightyistheRCGamer Oh thank you very much!! That means that almost all of the ones sold on Amazon work for the car, right?
@@josemolero6560 Yes that's correct
That thing almost has too much power it probably jumps really good cause you will be able to stabilize in the air go to a place with jumps or skate park
What was the 3S Lipo battery you bought to fit the hyper girl
Turnigy 3s I bought it on eBay sorry I don't have a link
A perfect fit 3s battery and you want to keep it a secret for some reason
No way bro. I love everyone the battery is a 3s turnigy from eBay
@@MightyistheRCGamer cool thanks 👍👍
@@S.I.M.P.L.E.T.O.N Thanks for not saying something bad.
@@MightyistheRCGamer Hey do you know if it's the 25 c, 40c or 60c? I found a lot of options
@@S.I.M.P.L.E.T.O.N I really don't remember but I would just buy the highest C value
Bro PLZZZZZZZZ PLZZZZ PLZZZ CAN YOU UNBOX THE JETWOOD 1:16 BRUSLESS RC CAR AND PLZZ RUN IT ON 3S BATTERY PLZZZZ PLZZZZ BRO I LOVE YOUR CONTENT ❤❤❤❤❤❤❤❤❤❤😊😊😊😊😊
Is rc stock and able to handle 3s
YES
Anybody having trouble with the cheap body pins I found a solution you just push them all the way in and then they secure quite well I haven’t lost a pin yet
Use 1:24 scale body clips
We’re can I buy..?
Amazon.
Install a gyro and that'll end your handling issues.
Turn light on so we can C it just ordered 3s ,4 mine 😀👍👊✌️🦅🇺🇸🦼